[PATCH 09/13] cxl/region: Implement XHB verification

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Cross host bridge verification primarily determines if the requested
interleave ordering can be achieved by the root decoder, which isn't as
programmable as other decoders.

The algorithm implemented here is based on the CXL Type 3 Memory Device
Software Guide, chapter 2.13.14

Signed-off-by: Ben Widawsky <ben.widawsky@xxxxxxxxx>
---
 .clang-format        |  2 +
 drivers/cxl/region.c | 89 +++++++++++++++++++++++++++++++++++++++++++-
 drivers/cxl/trace.h  |  3 ++
 3 files changed, 93 insertions(+), 1 deletion(-)

diff --git a/.clang-format b/.clang-format
index 15d4eaabc6b5..55f628f21722 100644
--- a/.clang-format
+++ b/.clang-format
@@ -169,6 +169,8 @@ ForEachMacros:
   - 'for_each_cpu_and'
   - 'for_each_cpu_not'
   - 'for_each_cpu_wrap'
+  - 'for_each_cxl_decoder_target'
+  - 'for_each_cxl_endpoint'
   - 'for_each_dapm_widgets'
   - 'for_each_dev_addr'
   - 'for_each_dev_scope'
diff --git a/drivers/cxl/region.c b/drivers/cxl/region.c
index c8e3c48dfbb9..ca559a4b5347 100644
--- a/drivers/cxl/region.c
+++ b/drivers/cxl/region.c
@@ -28,6 +28,17 @@
  */
 
 #define region_ways(region) ((region)->config.eniw)
+#define region_ig(region) (ilog2((region)->config.ig))
+
+#define for_each_cxl_endpoint(ep, region, idx)                                 \
+	for (idx = 0, ep = (region)->config.targets[idx];                      \
+	     idx < region_ways(region);                                        \
+	     idx++, ep = (region)->config.targets[idx])
+
+#define for_each_cxl_decoder_target(target, decoder, idx)                      \
+	for (idx = 0, target = (decoder)->target[idx];                         \
+	     idx < (decoder)->nr_targets;                                      \
+	     idx++, target++)
 
 static struct cxl_decoder *rootd_from_region(struct cxl_region *r)
 {
@@ -175,6 +186,30 @@ static bool qtg_match(const struct cxl_decoder *rootd,
 	return true;
 }
 
+static int get_unique_hostbridges(const struct cxl_region *region,
+				  struct cxl_port **hbs)
+{
+	struct cxl_memdev *ep;
+	int i, hb_count = 0;
+
+	for_each_cxl_endpoint(ep, region, i) {
+		struct cxl_port *hb = get_hostbridge(ep);
+		bool found = false;
+		int j;
+
+		BUG_ON(!hb);
+
+		for (j = 0; j < hb_count; j++) {
+			if (hbs[j] == hb)
+				found = true;
+		}
+		if (!found)
+			hbs[hb_count++] = hb;
+	}
+
+	return hb_count;
+}
+
 /**
  * region_xhb_config_valid() - determine cross host bridge validity
  * @rootd: The root decoder to check against
@@ -188,7 +223,59 @@ static bool qtg_match(const struct cxl_decoder *rootd,
 static bool region_xhb_config_valid(const struct cxl_region *region,
 				    const struct cxl_decoder *rootd)
 {
-	/* TODO: */
+	struct cxl_port *hbs[CXL_DECODER_MAX_INTERLEAVE];
+	int rootd_ig, i;
+	struct cxl_dport *target;
+
+	/* Are all devices in this region on the same CXL host bridge */
+	if (get_unique_hostbridges(region, hbs) == 1)
+		return true;
+
+	rootd_ig = rootd->interleave_granularity;
+
+	/* CFMWS.HBIG >= Device.Label.IG */
+	if (rootd_ig < region_ig(region)) {
+		trace_xhb_valid(region,
+				"granularity does not support the region interleave granularity\n");
+		return false;
+	}
+
+	/* ((2^(CFMWS.HBIG - Device.RLabel.IG) * (2^CFMWS.ENIW)) > Device.RLabel.NLabel) */
+	if (1 << (rootd_ig - region_ig(region)) * (1 << rootd->interleave_ways) >
+	    region_ways(region)) {
+		trace_xhb_valid(region,
+				"granularity to device granularity ratio requires a larger number of devices than currently configured");
+		return false;
+	}
+
+	/* Check that endpoints are hooked up in the correct order */
+	for_each_cxl_decoder_target(target, rootd, i) {
+		struct cxl_memdev *endpoint = region->config.targets[i];
+
+		if (get_hostbridge(endpoint) != target->port) {
+			trace_xhb_valid(region, "device ordering bad\n");
+			return false;
+		}
+	}
+
+	/*
+	 * CFMWS.InterleaveTargetList[n] must contain all devices, x where:
+	 *	(Device[x],RegionLabel.Position >> (CFMWS.HBIG -
+	 *	Device[x].RegionLabel.InterleaveGranularity)) &
+	 *	((2^CFMWS.ENIW) - 1) = n
+	 *
+	 * Linux notes: All devices are known to have the same interleave
+	 * granularity at this point.
+	 */
+	for_each_cxl_decoder_target(target, rootd, i) {
+		if (((i >> (rootd_ig - region_ig(region)))) &
+		    (((1 << rootd->interleave_ways) - 1) != target->port_id)) {
+			trace_xhb_valid(region,
+					"One or more devices are not connected to the correct hostbridge.");
+			return false;
+		}
+	}
+
 	return true;
 }
 
diff --git a/drivers/cxl/trace.h b/drivers/cxl/trace.h
index a53f00ba5d0e..4de47d1111ac 100644
--- a/drivers/cxl/trace.h
+++ b/drivers/cxl/trace.h
@@ -38,6 +38,9 @@ DEFINE_EVENT(cxl_region_template, sanitize_failed,
 DEFINE_EVENT(cxl_region_template, allocation_failed,
 	     TP_PROTO(const struct cxl_region *region, char *status),
 	     TP_ARGS(region, status));
+DEFINE_EVENT(cxl_region_template, xhb_valid,
+	     TP_PROTO(const struct cxl_region *region, char *status),
+	     TP_ARGS(region, status));
 
 #endif /* if !defined (__CXL_TRACE_H__) || defined(TRACE_HEADER_MULTI_READ) */
 
-- 
2.34.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux