The driver doesn't support these, they shouldn't be in the SoC include
anyway, and we're now configuring this in the bootloader instead. This
also solves the j274 1G/10G Ethernet variant discrepancy, since that
will now be configured properly based on the dynamic ADT property.
Signed-off-by: Hector Martin <marcan@xxxxxxxxx>
---
arch/arm64/boot/dts/apple/t8103.dtsi | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 15ee8c8c5fa0..8d1628e0b0c7 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -412,7 +412,6 @@ port00: pci@0,0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
reset-gpios = <&pinctrl_ap 152 0>;
- max-link-speed = <2>;
#address-cells = <3>;
#size-cells = <2>;
@@ -432,7 +431,6 @@ port01: pci@1,0 {
device_type = "pci";
reg = <0x800 0x0 0x0 0x0 0x0>;
reset-gpios = <&pinctrl_ap 153 0>;
- max-link-speed = <2>;
#address-cells = <3>;
#size-cells = <2>;
@@ -452,7 +450,6 @@ port02: pci@2,0 {
device_type = "pci";
reg = <0x1000 0x0 0x0 0x0 0x0>;
reset-gpios = <&pinctrl_ap 33 0>;
- max-link-speed = <1>;
#address-cells = <3>;
#size-cells = <2>;
--
2.33.0
