Conver the iProc PCIe controller Device Tree binding to YAML now that
all DTS in arch/arm and arch/arm64 have been fixed to be compliant.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
.../bindings/pci/brcm,iproc-pcie.txt | 133 -------------
.../bindings/pci/brcm,iproc-pcie.yaml | 179 ++++++++++++++++++
2 files changed, 179 insertions(+), 133 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
deleted file mode 100644
index df065aa53a83..000000000000
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-* Broadcom iProc PCIe controller with the platform bus interface
-
-Required properties:
-- compatible:
- "brcm,iproc-pcie" for the first generation of PAXB based controller,
-used in SoCs including NSP, Cygnus, NS2, and Pegasus
- "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
-controllers, used in Stingray
- "brcm,iproc-pcie-paxc" for the first generation of PAXC based
-controller, used in NS2
- "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
-controller, used in Stingray
- PAXB-based root complex is used for external endpoint devices. PAXC-based
-root complex is connected to emulated endpoint devices internal to the ASIC
-- reg: base address and length of the PCIe controller I/O register space
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map, standard PCI properties to define the
- mapping of the PCIe interface to interrupt numbers
-- linux,pci-domain: PCI domain ID. Should be unique for each host controller
-- bus-range: PCI bus numbers covered
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions
-
-Optional properties:
-- phys: phandle of the PCIe PHY device
-- phy-names: must be "pcie-phy"
-- dma-coherent: present if DMA operations are coherent
-- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done
- by the ASIC after power on reset. In this case, SW is required to configure
-the mapping, based on inbound memory regions specified by this property.
-
-- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done
-by the ASIC after power on reset. In this case, SW needs to configure it
-
-If the brcm,pcie-ob property is present, the following properties become
-effective:
-
-Required:
-- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
-address used by the iProc PCIe core (not the PCIe address)
-
-MSI support (optional):
-
-For older platforms without MSI integrated in the GIC, iProc PCIe core provides
-an event queue based MSI support. The iProc MSI uses host memories to store
-MSI posted writes in the event queues
-
-On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used
-
-- msi-map: Maps a Requester ID to an MSI controller and associated MSI
-sideband data
-
-- msi-parent: Link to the device node of the MSI controller, used when no MSI
-sideband data is passed between the iProc PCIe controller and the MSI
-controller
-
-Refer to the following binding documents for more detailed description on
-the use of 'msi-map' and 'msi-parent':
- Documentation/devicetree/bindings/pci/pci-msi.txt
- Documentation/devicetree/bindings/interrupt-controller/msi.txt
-
-When the iProc event queue based MSI is used, one needs to define the
-following properties in the MSI device node:
-- compatible: Must be "brcm,iproc-msi"
-- msi-controller: claims itself as an MSI controller
-- interrupts: List of interrupt IDs from its parent interrupt device
-
-Optional properties:
-- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
-require the interrupt enable registers to be set explicitly to enable MSI
-
-Example:
- pcie0: pcie@18012000 {
- compatible = "brcm,iproc-pcie";
- reg = <0x18012000 0x1000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
-
- linux,pci-domain = <0>;
-
- bus-range = <0x00 0xff>;
-
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x81000000 0 0 0x28000000 0 0x00010000
- 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
-
- phys = <&phy 0 5>;
- phy-names = "pcie-phy";
-
- brcm,pcie-ob;
- brcm,pcie-ob-axi-offset = <0x00000000>;
-
- msi-parent = <&msi0>;
-
- /* iProc event queue based MSI */
- msi0: msi@18012000 {
- compatible = "brcm,iproc-msi";
- msi-controller;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
- <GIC_SPI 97 IRQ_TYPE_NONE>,
- <GIC_SPI 98 IRQ_TYPE_NONE>,
- <GIC_SPI 99 IRQ_TYPE_NONE>,
- };
- };
-
- pcie1: pcie@18013000 {
- compatible = "brcm,iproc-pcie";
- reg = <0x18013000 0x1000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
-
- linux,pci-domain = <1>;
-
- bus-range = <0x00 0xff>;
-
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x81000000 0 0 0x48000000 0 0x00010000
- 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
-
- phys = <&phy 1 6>;
- phy-names = "pcie-phy";
- };
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
new file mode 100644
index 000000000000..6d7853f572dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PCIe controller with the platform bus interface
+
+maintainers:
+ - Ray Jui <ray.jui@xxxxxxxxxxxx>
+ - Scott Branden <scott.branden@xxxxxxxxxxxx>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # for the first generation of PAXB based controller, used in SoCs
+ # including NSP, Cygnus, NS2, and Pegasus
+ - brcm,iproc-pcie
+ # for the second generation of PAXB-based controllers, used in
+ # Stingray
+ - brcm,iproc-pcie-paxb-v2
+ # For the first generation of PAXC based controller, used in NS2
+ - brcm,iproc-pcie-paxc
+ # For the second generation of PAXC based controller, used in Stingray
+ - brcm,iproc-pcie-paxc-v2
+
+ reg:
+ maxItems: 1
+ description: >
+ Base address and length of the PCIe controller I/O register space
+
+ interrupt-map: true
+
+ interrupt-map-mask: true
+
+ "#interrupt-cells":
+ const: 1
+
+ ranges:
+ minItems: 1
+ maxItems: 2
+ description: >
+ Ranges for the PCI memory and I/O regions
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: pcie-phy
+
+ dma-coherent: true
+
+ "brcm,pcie-ob":
+ type: boolean
+ description: >
+ Some iProc SoCs do not have the outbound address mapping done by the
+ ASIC after power on reset. In this case, SW needs to configure it
+
+ "brcm,pcie-ob-axi-offset":
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The offset from the AXI address to the internal address used by the
+ iProc PCIe core (not the PCIe address)
+
+ msi:
+ type: object
+ properties:
+ compatible:
+ items:
+ - const: brcm,iproc-msi
+
+ msi-parent: true
+
+ msi-controller: true
+
+ "brcm,pcie-msi-inten":
+ type: boolean
+ description: >
+ Needs to be present for some older iProc platforms that require the
+ interrupt enable registers to be set explicitly to enable MSI
+
+dependencies:
+ "brcm,pcie-ob-axi-offset": ["brcm,pcie-ob"]
+ "brcm,pcie-msi-inten": [msi-controller]
+
+required:
+ - compatible
+ - reg
+ - ranges
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,iproc-pcie
+then:
+ required:
+ - interrupt-controller
+ - interrupt-map
+ - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pcie0: pcie@18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x28000000 0 0x00010000>,
+ <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+ phys = <&phy 0 5>;
+ phy-names = "pcie-phy";
+
+ brcm,pcie-ob;
+ brcm,pcie-ob-axi-offset = <0x00000000>;
+
+ msi-parent = <&msi0>;
+
+ /* iProc event queue based MSI */
+ msi0: msi {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+ <GIC_SPI 97 IRQ_TYPE_NONE>,
+ <GIC_SPI 98 IRQ_TYPE_NONE>,
+ <GIC_SPI 99 IRQ_TYPE_NONE>;
+ };
+ };
+
+ pcie1: pcie@18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x48000000 0 0x00010000>,
+ <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+ phys = <&phy 1 6>;
+ phy-names = "pcie-phy";
+ };
+ };
--
2.25.1
