On Tuesday 30 November 2021 14:26:52 Marek Behún wrote: > On Wed, 24 Nov 2021 16:59:38 +0100 > Pali Rohár <pali@xxxxxxxxxx> wrote: > > > This patch series contains various fixes for pci-bridge-emul code. > > This code is used only by pci-aardvark.c and pci-mvebu.c drivers. > > > > Pali Rohár (6): > > PCI: pci-bridge-emul: Make expansion ROM Base Address register > > read-only > > PCI: pci-bridge-emul: Properly mark reserved PCIe bits in PCI config > > space > > PCI: pci-bridge-emul: Add definitions for missing capabilities > > registers > > PCI: pci-bridge-emul: Fix definitions of reserved bits > > PCI: pci-bridge-emul: Correctly set PCIe capabilities > > PCI: pci-bridge-emul: Set PCI_STATUS_CAP_LIST for PCIe device > > > > drivers/pci/controller/pci-aardvark.c | 4 +- > > drivers/pci/controller/pci-mvebu.c | 8 ++ > > drivers/pci/pci-bridge-emul.c | 113 ++++++++++++++++++++++---- > > 3 files changed, 108 insertions(+), 17 deletions(-) > > > > I will send v2 of this series with the third patch dropped, since it > will be applied via aardvark batch 3 series. > > Marek I marked third patch at patchwork as "Superseded" (as now it was applied into pci/aardvark branch) and so there is no need to resend same patches again.
