Re: [PATCH] PCI: pciehp: clear cmd_busy bit when Command Completed in polling mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sorry for the late reply, the machine is occupied by someone else.

For detailed information:

https://bugzilla.kernel.org/show_bug.cgi?id=215143


Thanks,

Liguang

在 2021/11/21 14:35, Lukas Wunner 写道:
On Sun, Nov 21, 2021 at 09:50:38AM +0800, luanshi wrote:
2021/11/19 20:00, Lukas Wunner:
Please open a bug on bugzilla.kernel.org and attach full output
of lspci -vv and dmesg.  Be sure to add the following to the
command line:
    pciehp.pciehp_debug=1 dyndbg="file pciehp* +p"

Once you've done that, please report the bugzilla link here
so that we can analyze the issue properly.
I really need you to perform the above steps in order to analyze
what's going on here.

Again, if you get such timeout messages, it's usually not caused
by a bug in the driver but by an erratum in the hardware,
i.e. the hardware neglected to signal Command Completed in response
to a Slot Control register write.

Thanks,

Lukas



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux