From: Biwen Li <biwen.li@xxxxxxx>
The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.
Signed-off-by: Biwen Li <biwen.li@xxxxxxx>
Signed-off-by: Li Yang <leoyang.lil@xxxxxxx>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 0a8f68ff578f..d10593a191e5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -276,11 +276,6 @@ temperature-sensor@4c {
vcc-supply = <&sb_3v3>;
};
- rtc@51 {
- compatible = "nxp,pcf2129";
- reg = <0x51>;
- };
-
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
@@ -322,6 +317,15 @@ mux: mux-controller {
};
+&i2c1 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+};
+
&enetc_port1 {
phy-handle = <&qds_phy1>;
phy-connection-type = "rgmii-id";
--
2.25.1
