From: Alex Marginean <alexandru.marginean@xxxxxxx> Add overlays for various serdes protocols on LS1028A QDS board using different PHY cards. These should be applied at boot, based on serdes configuration. If no overlay is applied, only the RGMII interface on the QDS is available in Linux. Building device tree fragments requires passing the "-@" argument to dtc, which increases the base dtb size and might cause some platforms to fail to store the new binary. To avoid that, it would be nice to only pass "-@" for the platforms where fragments will be used, aka LS1028A-QDS. One approach suggested by Rob Herring is used here: https://lore.kernel.org/patchwork/patch/821645/ Also moved the enet* override nodes in dts file to be in alphabetic order. Signed-off-by: Alex Marginean <alexandru.marginean@xxxxxxx> Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx> Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx> Signed-off-by: Jason Liu <jason.hui.liu@xxxxxxx> Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx> Signed-off-by: Li Yang <leoyang.li@xxxxxxx> --- arch/arm64/boot/dts/freescale/Makefile | 16 +++ .../dts/freescale/fsl-ls1028a-qds-13bb.dts | 113 ++++++++++++++++++ .../dts/freescale/fsl-ls1028a-qds-65bb.dts | 108 +++++++++++++++++ .../dts/freescale/fsl-ls1028a-qds-7777.dts | 82 +++++++++++++ .../dts/freescale/fsl-ls1028a-qds-85bb.dts | 107 +++++++++++++++++ .../dts/freescale/fsl-ls1028a-qds-899b.dts | 75 ++++++++++++ .../dts/freescale/fsl-ls1028a-qds-9999.dts | 79 ++++++++++++ .../boot/dts/freescale/fsl-ls1028a-qds.dts | 19 ++- .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +- 9 files changed, 595 insertions(+), 6 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index db9e36ebe932..ba453e7c9be0 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,4 +1,14 @@ # SPDX-License-Identifier: GPL-2.0 + +# required for overlay support +DTC_FLAGS_fsl-ls1028a-qds := -@ +DTC_FLAGS_fsl-ls1028a-qds-13bb := -@ +DTC_FLAGS_fsl-ls1028a-qds-65bb := -@ +DTC_FLAGS_fsl-ls1028a-qds-7777 := -@ +DTC_FLAGS_fsl-ls1028a-qds-85bb := -@ +DTC_FLAGS_fsl-ls1028a-qds-899b := -@ +DTC_FLAGS_fsl-ls1028a-qds-9999 := -@ + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb @@ -11,6 +21,12 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts new file mode 100644 index 000000000000..f748a2c12a70 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 13bb + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board with lane B rework. + * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C. + * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + slot1_sgmii: ethernet-phy@2 { + /* AQR112 */ + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + + fragment@1 { + target = <&enetc_port0>; + + __overlay__ { + phy-handle = <&slot1_sgmii>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + status = "okay"; + }; + }; + + fragment@2 { + target = <&mdio_slot2>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* 4 ports on AQR412 */ + slot2_qxgmii0: ethernet-phy@0 { + reg = <0x0>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot2_qxgmii1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot2_qxgmii2: ethernet-phy@2 { + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot2_qxgmii3: ethernet-phy@3 { + reg = <0x3>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + + fragment@3 { + target = <&mscc_felix_ports>; + + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot2_qxgmii0>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot2_qxgmii1>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot2_qxgmii2>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot2_qxgmii3>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@4 { + target = <&mscc_felix>; + + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts new file mode 100644 index 000000000000..8ffb707a1576 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 69xx + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board with lane B rework. + * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + slot1_sgmii: ethernet-phy@2 { + /* AQR112 */ + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + + fragment@1 { + target = <&enetc_port0>; + + __overlay__ { + phy-handle = <&slot1_sgmii>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + status = "okay"; + }; + }; + + fragment@2 { + target = <&mdio_slot2>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* 4 ports on VSC8514 */ + slot2_qsgmii0: ethernet-phy@8 { + reg = <0x8>; + }; + + slot2_qsgmii1: ethernet-phy@9 { + reg = <0x9>; + }; + + slot2_qsgmii2: ethernet-phy@a { + reg = <0xa>; + }; + + slot2_qsgmii3: ethernet-phy@b { + reg = <0xb>; + }; + }; + }; + + fragment@3 { + target = <&mscc_felix_ports>; + + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot2_qsgmii0>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot2_qsgmii1>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot2_qsgmii2>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot2_qsgmii3>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@4 { + target = <&mscc_felix>; + + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts new file mode 100644 index 000000000000..eb6a1e674f10 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 7777 + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board without lane B rework. + * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing + * disabled, plugged in slot 1. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* 4 ports on AQR412 */ + slot1_sxgmii0: ethernet-phy@0 { + reg = <0x0>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot1_sxgmii1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot1_sxgmii2: ethernet-phy@2 { + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot1_sxgmii3: ethernet-phy@3 { + reg = <0x3>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + + fragment@1 { + target = <&mscc_felix_ports>; + + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot1_sxgmii0>; + phy-mode = "2500base-x"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot1_sxgmii1>; + phy-mode = "2500base-x"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot1_sxgmii2>; + phy-mode = "2500base-x"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot1_sxgmii3>; + phy-mode = "2500base-x"; + }; + }; + }; + + fragment@2 { + target = <&mscc_felix>; + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts new file mode 100644 index 000000000000..8e90c3088ba1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 85bb + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board with lane B rework. + * Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + slot1_sgmii: ethernet-phy@1c { + /* 1st port on VSC8234 */ + reg = <0x1c>; + }; + }; + }; + + fragment@1 { + target = <&enetc_port0>; + + __overlay__ { + phy-handle = <&slot1_sgmii>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; + }; + }; + + fragment@2 { + target = <&mdio_slot2>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* 4 ports on VSC8514 */ + slot2_qsgmii0: ethernet-phy@8 { + reg = <0x8>; + }; + + slot2_qsgmii1: ethernet-phy@9 { + reg = <0x9>; + }; + + slot2_qsgmii2: ethernet-phy@a { + reg = <0xa>; + }; + + slot2_qsgmii3: ethernet-phy@b { + reg = <0xb>; + }; + }; + }; + + fragment@3 { + target = <&mscc_felix_ports>; + + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot2_qsgmii0>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot2_qsgmii1>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot2_qsgmii2>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot2_qsgmii3>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@4 { + target = <&mscc_felix>; + + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts new file mode 100644 index 000000000000..5d0a094e6c44 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 85xx + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board without lane B rework. + * Requires a SCH-24801 card in slot 1. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* VSC8234 */ + slot1_sgmii0: ethernet-phy@1c { + reg = <0x1c>; + }; + + slot1_sgmii1: ethernet-phy@1d { + reg = <0x1d>; + }; + + slot1_sgmii2: ethernet-phy@1e { + reg = <0x1e>; + }; + + slot1_sgmii3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + + fragment@1 { + target = <&enetc_port0>; + __overlay__ { + phy-handle = <&slot1_sgmii0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; + }; + }; + + fragment@2 { + target = <&mscc_felix_ports>; + __overlay__ { + port@1 { + status = "okay"; + phy-handle = <&slot1_sgmii1>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot1_sgmii2>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@3 { + target = <&mscc_felix>; + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts new file mode 100644 index 000000000000..1ef743c48e84 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 85xx + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board without lane B rework. + * Requires a SCH-24801 card in slot 1. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* VSC8234 */ + slot1_sgmii0: ethernet-phy@1c { + reg = <0x1c>; + }; + + slot1_sgmii1: ethernet-phy@1d { + reg = <0x1d>; + }; + + slot1_sgmii2: ethernet-phy@1e { + reg = <0x1e>; + }; + + slot1_sgmii3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + + fragment@1 { + target = <&mscc_felix_ports>; + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot1_sgmii0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot1_sgmii1>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot1_sgmii2>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot1_sgmii3>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@2 { + target = <&mscc_felix>; + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 4e58a03a9985..0e2cc610d138 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -211,6 +211,16 @@ &duart1 { status = "okay"; }; +&enetc_port1 { + phy-handle = <&qds_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&enetc_port2 { + status = "okay"; +}; + &esdhc { status = "okay"; }; @@ -326,17 +336,16 @@ rtc@51 { }; }; -&enetc_port1 { - phy-handle = <&qds_phy1>; - phy-connection-type = "rgmii-id"; +&lpuart0 { status = "okay"; }; -&lpuart0 { +&lpuart1 { status = "okay"; }; -&lpuart1 { +&mscc_felix_port4 { + ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index bdd36a2dcb98..ba12d2a75c3e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -1080,7 +1080,7 @@ mscc_felix: ethernet-switch@0,5 { interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; - ports { + mscc_felix_ports: ports { #address-cells = <1>; #size-cells = <0>; -- 2.25.1
