Re: [PATCH dt + pci 1/2] dt-bindings: Add 'slot-power-limit-milliwatt' PCIe port property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Friday 12 November 2021 10:30:01 Rob Herring wrote:
> On Fri, Nov 12, 2021 at 9:32 AM Pali Rohár <pali@xxxxxxxxxx> wrote:
> >
> > On Friday 12 November 2021 09:25:20 Rob Herring wrote:
> > > On Sun, Oct 31, 2021 at 04:07:05PM +0100, Marek Behún wrote:
> > > > +   If present, this property specifies slot power limit in milliwatts. Host
> > > > +   drivers can parse this property and use it for programming Root Port or host
> > > > +   bridge, or for composing and sending PCIe Set_Slot_Power_Limit messages
> > > > +   through the Root Port or host bridge when transitioning PCIe link from a
> > > > +   non-DL_Up Status to a DL_Up Status.
> > >
> > > If your slots are behind a switch, then doesn't this apply to any bridge
> > > port?
> >
> > The main issue here is that pci.txt (and also scheme on github) is
> > mixing host bridge and root ports into one node. This new property
> > should be defined at the same place where is supports-clkreq or
> > reset-gpios, as it belongs to them.
> 
> Unfortunately that ship has already sailed. So we can split things up,
> but we still have to allow for the existing cases. I'm happy to take
> changes splitting up pci-bus.yaml to 2 or 3 schemas (host bridge,
> root-port, and PCI(e)-PCI(e) bridge?).

Well, no problem. I just need to know how you want to handle backward
compatibility definitions in YAML. Because it is possible via versioning
(like in JSONSchema-like structures in OpenAPI versioning) or via
deprecated attributes or via defining two schemas (one strict and one
loose)... There are lot of options and I saw all these options in
different projects which use YAML or JSON.

I did not know about github repository, I always looked at schemas and
definitions only in linux kernel tree and external files which were
mentioned in kernel tree.

Something I wrote in my RFC email, but I wrote this email patch...
https://lore.kernel.org/linux-pci/20211023144252.z7ou2l2tvm6cvtf7@pali/

> > And you are right, that this new property should be defined only for
> > root ports and downstream ports of switch.



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux