RE: [EXTERNAL] Re: [PATCH v4 2/2] arm64: PCI: hv: Add support for Hyper-V vPCI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday, November 10, 2021 5:26 AM,
Marc Zyngier <maz@xxxxxxxxxx> wrote:

> > On Tue, 09 Nov 2021 22:14:20 +0000,
> > Sunil Muthuswamy <sunilmut@xxxxxxxxxxxxxxxxxxx> wrote:
> > >
> > > From: Sunil Muthuswamy <sunilmut@xxxxxxxxxxxxx>
> > >
> > > Add support for Hyper-V vPCI for arm64 by implementing the arch specific
> > > interfaces. Introduce an IRQ domain and chip specific to Hyper-v vPCI that
> > > is based on SPIs. The IRQ domain parents itself to the arch GIC IRQ domain
> > > for basic vector management.
> > >
> > > Signed-off-by: Sunil Muthuswamy <sunilmut@xxxxxxxxxxxxx>
> > > ---
> > > In v2, v3 & v4:
> > >  Changes are described in the cover letter.
> > >
> > >  arch/arm64/include/asm/hyperv-tlfs.h |   9 ++
> > >  drivers/pci/Kconfig                  |   2 +-
> > >  drivers/pci/controller/Kconfig       |   2 +-
> > >  drivers/pci/controller/pci-hyperv.c  | 207 ++++++++++++++++++++++++++-
> > >  4 files changed, 217 insertions(+), 3 deletions(-)
> >
> > [...]
> >
> > > +static int hv_pci_vec_irq_domain_activate(struct irq_domain *domain,
> > > +					  struct irq_data *irqd, bool reserve)
> > > +{
> > > +	static int cpu;
> > > +
> > > +	/*
> > > +	 * Pick a cpu using round-robin as the irq affinity that can be
> > > +	 * temporarily used for composing MSI from the hypervisor. GIC
> > > +	 * will eventually set the right affinity for the irq and the
> > > +	 * 'unmask' will retarget the interrupt to that cpu.
> > > +	 */
> > > +	if (cpu >= cpumask_last(cpu_online_mask))
> > > +		cpu = 0;
> > > +	cpu = cpumask_next(cpu, cpu_online_mask);
> > > +	irq_data_update_effective_affinity(irqd, cpumask_of(cpu));
> >
> > The mind boggles.
> >
> > Let's imagine a single machine. cpu_online_mask only has bit 0 set,
> 
> single *CPU* machine
> 
> > and nr_cpumask_bits is 1. This is the first run, and cpu is 1:
> 
> cpu is *obviously* 0:
> 
> >
> > 	cpu = cpumask_next(cpu, cpu_online_mask);
> >
> > cpu is now set to 1. Which is not a valid CPU number, but a valid
> > return value indicating that there is no next CPU as it is equal to
> > nr_cpumask_bits. cpumask_of(cpu) will then diligently return crap,
> > which you carefully store into the irq descriptor. The IRQ subsystem
> > thanks you.
> >
> > The same reasoning applies to any number of CPUs, and you obviously
> > never checked what any of this does :-(. As to what the behaviour is
> > when multiple CPUs run this function in parallel, let's not even
> > bother (locking is overrated).
> >
> > Logic and concurrency issues aside, why do you even bother setting
> > some round-robin affinity if all you need is to set *something* so
> > that a hypervisor message can be composed? Why not use the first
> > online CPU? At least it will be correct.
> 
> Everything else holds.
> 
> 	M.

Good call on not being able to pick cpu 0 and that being a problem for
single cpu system. The cpu initialization should have been '-1' to be able
to successfully pick cpu 0.

I don't see concurrency an issue because this was a best-case effort to
randomize the interrupt distribution across cpu's. So, even if two irq's
ended up with the same cpu, that will still work.

I also had thoughts of just using the first online cpu since this is just
temporary. So, I will go with that as that will also simplify things. Thanks
for your feedback.

- Sunil




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux