On Tue, Nov 09, 2021 at 04:10:14PM +0100, Christian Zigotzky wrote: > On 09 November 2021 at 03:45 pm, Christian Zigotzky wrote: > > Hello, > > > > The Nemo board [1] doesn't recognize any ATA disks with the pci-v5.16 > updates [2]. > > > > Error messages: > > > > ata4.00: gc timeout cmd 0xec > > ata4.00: failed to IDENTIFY (I/O error, error_mask=0x4) > > ata1.00: gc timeout cmd 0xec > > ata1.00: failed to IDENTIFY (I/O error, error_mask=0x4) > > ata3.00: gc timeout cmd 0xec > > ata3.00: failed to IDENTIFY (I/O error, error_mask=0x4) > > > > I was able to revert the new pci-v5.16 updates [2]. After a new compiling, > the kernel recognize all ATA disks correctly. > > > > Could you please check the pci-v5.16 updates [2]? > > > > Please find attached the kernel config. > > > > Thanks, > > Christian > > > > [1] https://en.wikipedia.org/wiki/AmigaOne_X1000 > > [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0c5c62ddf88c34bc83b66e4ac9beb2bb0e1887d4 Sorry for the breakage, and thank you very much for the report. Can you please collect the complete dmesg logs before and after the pci-v5.16 changes and the "sudo lspci -vv" output from before the changes? You can attach them at https://bugzilla.kernel.org if you don't have a better place to put them. You could attach the kernel config there, too, since it didn't make it to the mailing list (vger may discard them -- see http://vger.kernel.org/majordomo-info.html). Bjorn
