Re: [PATCH] PCI/MSI: Move non-mask check back into low level accessors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 4 Nov 2021 at 00:45, Thomas Gleixner <tglx@xxxxxxxxxxxxx> wrote:
>
> On Wed, Oct 27 2021 at 17:29, Josef Johansson wrote:
>
> CC+: EFIFB and scheduler folks
>
> > On 10/27/21 14:01, Josef Johansson wrote:
> > When I suspend I get errors from Xen, including stacktraces below
> > if anyone has any clue, if this might be related. I get one each time I
> > suspend
> > and the third time amdgpu gives up.
> >
> > rtc_cmos 00:01: registered as rtc0
> > rtc_cmos 00:01: setting system clock to 2021-10-27T15:04:35 UTC (1635347075)
> > rtc_cmos 00:01: no alarms, y3k, 114 bytes nvram
> > device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
> > device-mapper: uevent: version 1.0.3
> > device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@xxxxxxxxxx
> > efifb: probing for efifb
> > efifb: cannot reserve video memory at 0x60000000
> > ------------[ cut here ]------------
> > ioremap on RAM at 0x0000000060000000 - 0x00000000607e8fff
> > WARNING: CPU: 7 PID: 1 at arch/x86/mm/ioremap.c:210 __ioremap_caller+0x332/0x350
>
> That's this warning:
>
>         /*
>          * Don't allow anybody to remap normal RAM that we're using..
>          */
>         if (io_desc.flags & IORES_MAP_SYSTEM_RAM) {
>                 WARN_ONCE(1, "ioremap on RAM at %pa - %pa\n",
>                           &phys_addr, &last_addr);
>                 return NULL;
>         }
>
>
> > Modules linked in:
> > CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.15.0-0.rc7.0.fc32.qubes.x86_64 #1
> > Hardware name: LENOVO 20Y1S02400/20Y1S02400, BIOS R1BET65W(1.34 ) 06/17/2021
> > RIP: e030:__ioremap_caller+0x332/0x350
> > Code: e8 c3 ca ff ff 49 09 c6 e9 32 fe ff ff 48 8d 54 24 28 48 8d 74 24 18 48 c7 c7 35 f2 5d 82 c6 05 e8 7b a9 01 01 e8 48 39 be 00 <0f> 0b 45 31 e4 e9 ac fe ff ff e8 ff f5 c3 00 66 66 2e 0f 1f 84 00
> > RSP: e02b:ffffc9004007bb00 EFLAGS: 00010286
> > RAX: 0000000000000000 RBX: 00000000007e9000 RCX: ffffffff82915ca8
> > RDX: c0000000ffffdfff RSI: 0000000000000000 RDI: ffffffff82865ca0
> > RBP: 0000000060000000 R08: 0000000000000000 R09: ffffc9004007b948
> > R10: ffffc9004007b940 R11: ffffffff82945ce8 R12: 0000000000000001
> > R13: 00000000007e9000 R14: 00000000007e9000 R15: ffffffff81c8f772
> > FS:  0000000000000000(0000) GS:ffff8881407c0000(0000) knlGS:0000000000000000
> > CS:  e030 DS: 0000 ES: 0000 CR0: 0000000080050033
> > CR2: 0000000000000000 CR3: 0000000002810000 CR4: 0000000000050660
> > Call Trace:
> >  efifb_probe.cold+0x2e6/0x688
>
> Why is this probing EFIFB at resume? Josef is that hibernate or suspend
> to RAM?
>
> >  platform_probe+0x3f/0x90
> >  call_driver_probe+0x24/0xc0
> >  really_probe+0x1e7/0x310
> >  __driver_probe_device+0xfe/0x180
> >  driver_probe_device+0x1e/0x90
> >  __device_attach_driver+0x72/0xe0
> >  ? driver_allows_async_probing+0x50/0x50
> >  ? driver_allows_async_probing+0x50/0x50
> >  bus_for_each_drv+0x8f/0xd0
> >  __device_attach+0xe9/0x1f0
> >  bus_probe_device+0x8e/0xa0
> >  device_add+0x3fb/0x630
> >  platform_device_add+0x102/0x230
> >  sysfb_init+0xea/0x141
> >  ? firmware_map_add_early+0xb8/0xb8
> >  do_one_initcall+0x57/0x200
> >  do_initcalls+0x109/0x166
> >  kernel_init_freeable+0x23c/0x2bd
> >  ? rest_init+0xc0/0xc0
> >  kernel_init+0x16/0x120
> >  ret_from_fork+0x22/0x30
> > ---[ end trace b068d3cd1b7f5f49 ]---
> > efifb: abort, cannot remap video memory 0x7e9000 @ 0x60000000
> > efi-framebuffer: probe of efi-framebuffer.0 failed with error -5
> > --
> > printk: Suspending console(s) (use no_console_suspend to debug)
> > [drm] free PSP TMR buffer
> > PM: suspend devices took 0.428 seconds
> > ACPI: EC: interrupt blocked
> > ACPI: PM: Preparing to enter system sleep state S3
> > ACPI: EC: event blocked
> > ACPI: EC: EC stopped
> > ACPI: PM: Saving platform NVS memory
> > Disabling non-boot CPUs ...
> > ------------[ cut here ]------------
> > WARNING: CPU: 1 PID: 0 at arch/x86/mm/tlb.c:522  switch_mm_irqs_off+0x3c5/0x400
>
>         if (WARN_ON_ONCE(__read_cr3() != build_cr3(real_prev->pgd, prev_asid))) {
>
> > Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device snd_timer nf_tables nfnetlink vfat fat intel_rapl_msr think_lmi firmware_attributes_class wmi_bmof intel_rapl_common pcspkr uvcvideo videobuf2_vmalloc videobuf2_memops joydev videobuf2_v4l2 sp5100_tco k10temp videobuf2_common i2c_piix4 iwlwifi videodev mc cfg80211 thinkpad_acpi ipmi_devintf ucsi_acpi platform_profile typec_ucsi ledtrig_audio ipmi_msghandler r8169 rfkill typec snd wmi soundcore video i2c_scmi fuse xenfs ip_tables dm_thin_pool dm_persistent_data dm_bio_prison dm_crypt trusted asn1_encoder hid_multitouch amdgpu crct10dif_pclmul crc32_pclmul crc32c_intel gpu_sched i2c_algo_bit drm_ttm_helper ghash_clmulni_intel ttm serio_raw drm_kms_helper cec sdhci_pci cqhci sdhci xhci_pci drm xhci_pci_renesas nvme xhci_hcd ehci_pci mmc_core ehci_hcd nvme_core xen_acpi_processor xen_privcmd xen_pciback xen_blkback xen_gntalloc xen_gntdev xen_evtchn uinput
> > CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W        --------- ---  5.15.0-0.rc7.0.fc32.qubes.x86_64 #1
> > Hardware name: LENOVO 20Y1S02400/20Y1S02400, BIOS R1BET65W(1.34 ) 06/17/2021
> > RIP: e030:switch_mm_irqs_off+0x3c5/0x400
> > Code: f0 41 80 65 01 fb ba 01 00 00 00 49 8d b5 60 23 00 00 4c 89 ef 49 c7 85 68 23 00 00 60 1d 08 81 e8 a0 f3 08 00 e9 15 fd ff ff <0f> 0b e8 34 fa ff ff e9 ad fc ff ff 0f 0b e9 31 fe ff ff 0f 0b e9
> > RSP: e02b:ffffc900400f3eb0 EFLAGS: 00010006
> > RAX: 00000001336c6000 RBX: ffff888140660000 RCX: 0000000000000040
> > RDX: ffff8881003027c0 RSI: 0000000000000000 RDI: ffff8881b36c6000
> > RBP: ffffffff829d91c0 R08: 0000000000000000 R09: 0000000000000000
> > R10: 0000000000000008 R11: 0000000000000000 R12: ffff888104e88440
> > R13: ffff8881003027c0 R14: 0000000000000000 R15: 0000000000000001
> > FS:  0000000000000000(0000) GS:ffff888140640000(0000) knlGS:0000000000000000
> > CS:  10000e030 DS: 002b ES: 002b CR0: 0000000080050033
> > CR2: 000060b7d78bf198 CR3: 0000000002810000 CR4: 0000000000050660
> > Call Trace:
> >  switch_mm+0x1c/0x30
> >  idle_task_exit+0x55/0x60
> >  play_dead_common+0xa/0x20
> >  xen_pv_play_dead+0xa/0x60
>
> So this is when bringing the non boot CPUs down and the switch_mm() code
> discovers inconsistency between CR3 and the expected value.
>
> Would probably be interesting to print the actual values, but XEN folks
> might have an idea.
>
> >  do_idle+0xd1/0xe0
> >  cpu_startup_entry+0x19/0x20
> >  asm_cpu_bringup_and_idle+0x5/0x1000
> > ---[ end trace b068d3cd1b7f5f4b ]---
> > smpboot: CPU 1 is now offline
> > smpboot: CPU 2 is now offline
> > smpboot: CPU 3 is now offline
> > smpboot: CPU 4 is now offline
> > smpboot: CPU 5 is now offline
> > smpboot: CPU 6 is now offline
> > smpboot: CPU 7 is now offline
> > ACPI: PM: Low-level resume complete
> > ACPI: EC: EC started
> > ACPI: PM: Restoring platform NVS memory
> > xen_acpi_processor: Uploading Xen processor PM info
> > xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU1
> > xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU3
> > xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU5
> > xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU7
> > xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU9
> > xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU11
> > --
> > CPU2 is up
> > installing Xen timer for CPU 3
> > cpu 3 spinlock event irq 79
> > [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> > ACPI: \_SB_.PLTF.C003: Found 3 idle states
> > ACPI: FW issue: working around C-state latencies out of order
> > CPU3 is up
> > ------------[ cut here ]------------
> > cfs_rq->avg.load_avg || cfs_rq->avg.util_avg || cfs_rq->avg.runnable_avg
> > installing Xen timer for CPU 4
> > WARNING: CPU: 3 PID: 455 at kernel/sched/fair.c:3339  __update_blocked_fair+0x49b/0x4b0
>
>         /*
>          * _avg must be null when _sum are null because _avg = _sum / divider
>          * Make sure that rounding and/or propagation of PELT values never
>          * break this.
>          */
>         SCHED_WARN_ON(cfs_rq->avg.load_avg ||
>                       cfs_rq->avg.util_avg ||
>                       cfs_rq->avg.runnable_avg);
>
> PeterZ, does that ring any bell?

This warning raises when the PELT signal is not propagated correctly
in the cfs hierarchy which can impact the fairness. This is a bit
strange to get this warning during a resume. CPU 3 has just been put
online so no propagation already  happened and everything should be
synced

>
> > Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device snd_timer nf_tables nfnetlink vfat fat intel_rapl_msr think_lmi firmware_attributes_class wmi_bmof intel_rapl_common pcspkr uvcvideo videobuf2_vmalloc videobuf2_memops joydev videobuf2_v4l2 sp5100_tco k10temp videobuf2_common i2c_piix4 iwlwifi videodev mc cfg80211 thinkpad_acpi ipmi_devintf ucsi_acpi platform_profile typec_ucsi ledtrig_audio ipmi_msghandler r8169 rfkill typec snd wmi soundcore video i2c_scmi fuse xenfs ip_tables dm_thin_pool dm_persistent_data dm_bio_prison dm_crypt trusted asn1_encoder hid_multitouch amdgpu crct10dif_pclmul crc32_pclmul crc32c_intel gpu_sched i2c_algo_bit drm_ttm_helper ghash_clmulni_intel ttm serio_raw drm_kms_helper cec sdhci_pci cqhci sdhci xhci_pci drm xhci_pci_renesas nvme xhci_hcd ehci_pci mmc_core ehci_hcd nvme_core xen_acpi_processor xen_privcmd xen_pciback xen_blkback xen_gntalloc xen_gntdev xen_evtchn uinput
> > CPU: 3 PID: 455 Comm: kworker/3:2 Tainted: G        W        --------- ---  5.15.0-0.rc7.0.fc32.qubes.x86_64 #1
> > Hardware name: LENOVO 20Y1S02400/20Y1S02400, BIOS R1BET65W(1.34 ) 06/17/2021
> > Workqueue:  0x0 (events)
> > RIP: e030:__update_blocked_fair+0x49b/0x4b0
> > Code: 6b fd ff ff 49 8b 96 48 01 00 00 48 89 90 50 09 00 00 e9 ff fc ff ff 48 c7 c7 10 7a 5e 82 c6 05 f3 35 9e 01 01 e8 1f f3 b2 00 <0f> 0b 41 8b 86 38 01 00 00 e9 c6 fc ff ff 0f 1f 80 00 00 00 00 0f
> > RSP: e02b:ffffc900410d7ce0 EFLAGS: 00010082
> > RAX: 0000000000000000 RBX: 0000000000000018 RCX: ffff8881406d8a08
> > RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8881406d8a00
> > RBP: ffff8881406e9800 R08: 0000000000000048 R09: ffffc900410d7c78
> > R10: 0000000000000049 R11: 000000002d2d2d2d R12: ffff8881406e9f80
> > R13: ffff8881406e9e40 R14: ffff8881406e96c0 R15: 0000000000000000
> > FS:  0000000000000000(0000) GS:ffff8881406c0000(0000) knlGS:0000000000000000
> > CS:  10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033
> > CR2: 0000782e51820000 CR3: 0000000002810000 CR4: 0000000000050660
> > Call Trace:
> >  update_blocked_averages+0xa8/0x180
> >  newidle_balance+0x175/0x380
> >  pick_next_task_fair+0x39/0x3e0
> >  pick_next_task+0x4c/0xbd0
> >  ? dequeue_task_fair+0xba/0x390
> >  __schedule+0x13a/0x570
> >  schedule+0x44/0xa0
> >  worker_thread+0xc0/0x320
> >  ? process_one_work+0x390/0x390
> >  kthread+0x10f/0x130
> >  ? set_kthread_struct+0x40/0x40
> >  ret_from_fork+0x22/0x30
> > ---[ end trace b068d3cd1b7f5f4c ]---
> > cpu 4 spinlock event irq 85
> > [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> > ACPI: \_SB_.PLTF.C004: Found 3 idle states
> > ACPI: FW issue: working around C-state latencies out of order
> > CPU4 is up
> > installing Xen timer for CPU 5
> > cpu 5 spinlock event irq 91
> > [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> > ACPI: \_SB_.PLTF.C005: Found 3 idle states
> > ACPI: FW issue: working around C-state latencies out of order
> > CPU5 is up




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux