Re: [PATCH V11 7/8] PCI: Enable 10-Bit Tag support for PCIe Endpoint device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2021/11/2 6:33, Bjorn Helgaas wrote:
On Mon, Nov 01, 2021 at 05:02:41PM -0500, Bjorn Helgaas wrote:
On Sat, Oct 30, 2021 at 09:53:47PM +0800, Dongdong Liu wrote:
10-Bit Tag capability, introduced in PCIe-4.0 increases the total Tag
field size from 8 bits to 10 bits.

PCIe spec 5.0 r1.0 section 2.2.6.2 "Considerations for Implementing
10-Bit Tag Capabilities" Implementation Note:

  For platforms where the RC supports 10-Bit Tag Completer capability,
  it is highly recommended for platform firmware or operating software
  that configures PCIe hierarchies to Set the 10-Bit Tag Requester Enable
  bit automatically in Endpoints with 10-Bit Tag Requester capability.
  This enables the important class of 10-Bit Tag capable adapters that
  send Memory Read Requests only to host memory.

It's safe to enable 10-bit tags for all devices below a Root Port that
supports them. Switches that lack 10-Bit Tag Completer capability are
still able to forward NPRs and Completions carrying 10-Bit Tags correctly,
since the two new Tag bits are in TLP Header bits that were formerly
Reserved.

Side note: the reason we want to do this to increase performance by
allowing more outstanding requests.  Do you have any benchmarking that
we can mention here to show that this is actually a benefit?  I don't
doubt that it is, but I assume you've measured it and it would be nice
to advertise it.

Hmmm.  I did a quick Google search looking for "nvme pcie 10-bit tags"
hoping to find some performance info, but what I *actually* found was
several reports of 10-bit tags causing breakage:

  https://www.reddit.com/r/MSI_Gaming/comments/exjvzg/x570_apro_7c37vh72beta_version_has_anyone_tryed_it/
  https://rog.asus.com/forum/showthread.php?115064-Beware-of-agesa-1-0-0-4B-bios-not-good!/page2
  https://forum-en.msi.com/index.php?threads/sound-blaster-z-has-weird-behaviour-after-updating-bios-x570-gaming-edge-wifi.325223/page-2
  https://gearspace.com/board/electronic-music-instruments-and-electronic-music-production/1317189-h8000fw-firewire-facts-2020-must-read.html
  https://www.soundonsound.com/forum/viewtopic.php?t=69651&start=12
  https://forum.rme-audio.de/viewtopic.php?id=30307

This is a big problem for me.

Some of these might be a broken BIOS that turns on 10-bit tags when
the completer doesn't support them.  I didn't try to debug them to
that level.  But the last thing I want is to enable 10-bit by default
and cause boot issues or sound card issues or whatever.
It seems a BIOS software bug, as it turned on(as default) a 10-Bit Tag
Field for RP, but the card(non-Gen4 card) does not support 10-Bit Completer.

This patch we enable 10-Bit Tag Requester for EP when RC supports
10-Bit Tag Completer capability. So it shuld be worked ok.

The below is one of the link. other links seems the same issue.
https://forum.rme-audio.de/viewtopic.php?id=30307
"Re: AMD Ryzen X570 chipset problems
So for those running into similar problems I found out that in most
recent BIOS AMD turned on(as default) a 10-bit Tag Field, which is only
available on PCI-e Gen4 devices. So your BIOS get stuck on startup if
inserted a non-Gen4 card like my firewire card.

So you need to find that feature in your BIOS and turn it off and set
the PCI compatibility on Gen3 for the slot your card is in.

Hope this helps others running in to similar troubles."

I'm pretty sure this is a show-stopper for wedging this into v5.16 at
this late date.  It's conceivable we could still do it if everything
defaulted to "off" and we had a knob whereby users could turn it on
via boot param or sysfs.
Maybe we can merge this patchset later into v5.17.

But I still think default to "on" will be better,
Current we enable 10-Bit Tag, in the future PCIe 6.0 maybe need to use
14-Bit tags to get good performance.

In any case, we (by which I'm afraid I mean "you" :)) need to
investigate the problem reports, figure out whether we will see
similar problems, and fix them before merging if we can.
We have tested a PCIe 5.0 network card on FPGA with 10-Bit tag worked
ok. I have not got the performance data as FPGA is slow.

Current we enable 10-Bit Tag Requester for EP when RC supports
10-Bit Tag Completer capability. It shoud be worked ok except hardware
bugs, we also provide boot param to diasble 10-Bit Tag if the hardware
really have a bug or can do some quirks as 8-bit tag has done if we
have known the hardware.

Thanks,
Dongdong.

Thanks to Krzysztof for pointing out the potential for issues like
this.

Bjorn
.




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux