Hi, > Hi Ralf, can you attach the complete dmesg log to the bug report, > please? I see a snippet (starting with "Bluetooth: SCO socket layer > initialized"), but there's a lot of useful information before that. > The "dmesg" command only shows the most recent part of the log, so if > the kernel's buffer has wrapped around, it doesn't show the beginning. > The /var/log/dmesg (or similar) file should contain the useful bits. Okay, I attached that file. It is truncated after 30 seconds (dmesg prints a whole lot of stuff from later on), but since the problem appears quite early in the boot process, I hope that is enough. Kind regards, Ralf
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-1-amd64 (Debian 3.0.0-1) (ben@xxxxxxxxxxxxxxx) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun Jul 24 02:24:44 UTC 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=063a7f00-8498-4d36-ba06-e09e819487aa ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000acb70000 (usable) [ 0.000000] BIOS-e820: 00000000acb70000 - 00000000acb80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000acb80000 - 00000000afd4f000 (usable) [ 0.000000] BIOS-e820: 00000000afd4f000 - 00000000afdcf000 (reserved) [ 0.000000] BIOS-e820: 00000000afdcf000 - 00000000afecf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afecf000 - 00000000afeff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afeff000 - 00000000aff00000 (usable) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Hewlett-Packard Compaq 615/308C, BIOS 68GVV Ver. F.0F 12/17/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back [ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back [ 0.000000] 3 base 0100000000 mask FFC0000000 write-back [ 0.000000] 4 base 00FFE00000 mask FFFFE00000 write-protect [ 0.000000] 5 base 00FFF40000 mask FFFFFF0000 write-protect [ 0.000000] 6 base 00ACB70000 mask FFFFFF0000 uncachable [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000140000000 aka 5120M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000aff00000 [ 0.000000] 0000000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00aff00000 page 4k [ 0.000000] kernel direct mapping tables up to aff00000 @ afd4a000-afd4f000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ 13fffa000-140000000 [ 0.000000] RAMDISK: 36bce000 - 375df000 [ 0.000000] ACPI: RSDP 00000000000f69a0 00014 (v00 HP ) [ 0.000000] ACPI: RSDT 00000000afefe038 00040 (v01 HPQOEM SLIC-MPC 00000003 01000013) [ 0.000000] ACPI: FACP 00000000afefd000 00074 (v01 HP 0944 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 00000000afee2000 17A07 (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: FACS 00000000afea1000 00040 [ 0.000000] ACPI: APIC 00000000afefc000 00084 (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 00000000afefb000 0003C (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: MSCT 00000000afee0000 0004E (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: HPET 00000000afedf000 00038 (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 00000000afede000 002B4 (v01 AMD PowerNow 00000001 AMD 00000001) [ 0.000000] ACPI: SRAT 00000000afedd000 000A0 (v03 AMD ANT 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000 [ 0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000) [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013ba00000-ffff88013effffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000acb70 [ 0.000000] 0: 0x000acb80 -> 0x000afd4f [ 0.000000] 0: 0x000afeff -> 0x000aff00 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 982223 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 701816 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000 [ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000acb70000 - 00000000acb80000 [ 0.000000] PM: Registered nosave memory: 00000000afd4f000 - 00000000afdcf000 [ 0.000000] PM: Registered nosave memory: 00000000afdcf000 - 00000000afecf000 [ 0.000000] PM: Registered nosave memory: 00000000afecf000 - 00000000afeff000 [ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb01000 [ 0.000000] PM: Registered nosave memory: 00000000feb01000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:30100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s78912 r8192 d23488 u524288 [ 0.000000] pcpu-alloc: s78912 r8192 d23488 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 964298 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=063a7f00-8498-4d36-ba06-e09e819487aa ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3788332k/5242880k available (3324k kernel code, 1313988k absent, 140560k reserved, 3371k data, 560k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2199.147 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4398.29 BogoMIPS (lpj=8796588) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004203] Security Framework initialized [ 0.004208] SELinux: Disabled at boot. [ 0.004700] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.008356] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.009946] Mount-cache hash table entries: 256 [ 0.010167] Initializing cgroup subsys cpuacct [ 0.010173] Initializing cgroup subsys memory [ 0.010192] Initializing cgroup subsys devices [ 0.010195] Initializing cgroup subsys freezer [ 0.010200] Initializing cgroup subsys net_cls [ 0.010203] Initializing cgroup subsys blkio [ 0.010270] tseg: 00aff00000 [ 0.010272] CPU: Physical Processor ID: 0 [ 0.010274] CPU: Processor Core ID: 0 [ 0.010278] mce: CPU supports 5 MCE banks [ 0.010742] ACPI: Core revision 20110413 [ 0.020527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062659] CPU0: AMD Athlon(tm)X2 DualCore QL-66 stepping 01 [ 0.064003] Performance Events: AMD PMU driver. [ 0.064003] ... version: 0 [ 0.064003] ... bit width: 48 [ 0.064003] ... generic registers: 4 [ 0.064003] ... value mask: 0000ffffffffffff [ 0.064003] ... max period: 00007fffffffffff [ 0.064003] ... fixed-purpose events: 0 [ 0.064003] ... event mask: 000000000000000f [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] Booting Node 0, Processors #1 [ 0.064003] smpboot cpu 1: start_ip = 9a000 [ 0.152008] TSC synchronization [CPU#0 -> CPU#1]: [ 0.152008] Measured 27226401 cycles TSC warp between CPUs, turning off TSC clock. [ 0.152008] Marking TSC unstable due to check_tsc_sync_source failed [ 0.152036] NMI watchdog enabled, takes one hw-pmu counter. [ 0.152068] Brought up 2 CPUs [ 0.152072] Total of 2 processors activated (8787.34 BogoMIPS). [ 0.152588] devtmpfs: initialized [ 0.160045] PM: Registering ACPI NVS region at acb70000 (65536 bytes) [ 0.160045] PM: Registering ACPI NVS region at afdcf000 (1048576 bytes) [ 0.160182] print_constraints: dummy: [ 0.160282] NET: Registered protocol family 16 [ 0.160459] TOM: 00000000c0000000 aka 3072M [ 0.160462] Fam 10h mmconf [e0000000, efffffff] [ 0.160471] TOM2: 0000000140000000 aka 5120M [ 0.160566] Extended Config Space enabled on 0 nodes [ 0.160583] ACPI: bus type pci registered [ 0.160687] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.160692] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.204324] PCI: Using configuration type 1 for base access [ 0.204997] bio: create slab <bio-0> at 0 [ 0.206507] ACPI: EC: Look up EC in DSDT [ 0.360104] ACPI: Interpreter enabled [ 0.360112] ACPI: (supports S0 S3 S4 S5) [ 0.360142] ACPI: Using IOAPIC for interrupt routing [ 0.366302] ACPI: Power Resource [APPR] (off) [ 0.442138] ACPI: Power Resource [PFN0] (off) [ 0.442223] ACPI: Power Resource [PFN1] (off) [ 0.442309] ACPI: Power Resource [PFN2] (off) [ 0.442394] ACPI: Power Resource [PFN3] (off) [ 0.442480] ACPI: Power Resource [PFN4] (off) [ 0.443179] ACPI: Power Resource [PFN6] (off) [ 0.443266] ACPI: Power Resource [PFN7] (off) [ 0.443349] ACPI: Power Resource [PFN8] (off) [ 0.443436] ACPI: Power Resource [PFN9] (off) [ 0.443523] ACPI: Power Resource [PFNA] (off) [ 0.443579] ACPI: Power Resource [PGF0] (off) [ 0.444634] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.445058] ACPI: No dock devices found. [ 0.445061] HEST: Table not found. [ 0.445066] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.445202] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.445477] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.445480] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.445483] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.445486] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff] [ 0.445489] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] [ 0.445493] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] [ 0.445496] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] [ 0.445499] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.445502] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.445505] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.445508] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.445511] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 0.445515] pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff] [ 0.445518] pci_root PNP0A03:00: host bridge window [mem 0x000e8000-0x000ebfff] [ 0.445521] pci_root PNP0A03:00: host bridge window [mem 0x000ec000-0x000effff] [ 0.445524] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 0.445527] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfffdffff] [ 0.445530] pci_root PNP0A03:00: host bridge window [mem 0xffe00000-0xffffffff] [ 0.445536] pci_root PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xffe00000-0xffffffff] ignored [ 0.445544] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000ce9ff] [ 0.445637] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x000ec000-0x000effff] conflicts with reserved [mem 0x000ef000-0x000fffff] [ 0.445707] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600 [ 0.445786] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 [ 0.445879] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604 [ 0.445924] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.445929] pci 0000:00:04.0: PME# disabled [ 0.445990] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604 [ 0.446035] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.446039] pci 0000:00:07.0: PME# disabled [ 0.446099] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604 [ 0.446147] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.446151] pci 0000:00:09.0: PME# disabled [ 0.446227] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.446253] pci 0000:00:11.0: reg 10: [io 0x6018-0x601f] [ 0.446266] pci 0000:00:11.0: reg 14: [io 0x6024-0x6027] [ 0.446279] pci 0000:00:11.0: reg 18: [io 0x6010-0x6017] [ 0.446291] pci 0000:00:11.0: reg 1c: [io 0x6020-0x6023] [ 0.446304] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f] [ 0.446317] pci 0000:00:11.0: reg 24: [mem 0xd4409000-0xd44093ff] [ 0.446378] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.446396] pci 0000:00:12.0: reg 10: [mem 0xd4408000-0xd4408fff] [ 0.446480] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.446498] pci 0000:00:12.1: reg 10: [mem 0xd4407000-0xd4407fff] [ 0.446590] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.446615] pci 0000:00:12.2: reg 10: [mem 0xd4409500-0xd44095ff] [ 0.446705] pci 0000:00:12.2: supports D1 D2 [ 0.446708] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.446713] pci 0000:00:12.2: PME# disabled [ 0.446744] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.446761] pci 0000:00:13.0: reg 10: [mem 0xd4406000-0xd4406fff] [ 0.446846] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.446864] pci 0000:00:13.1: reg 10: [mem 0xd4405000-0xd4405fff] [ 0.446956] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.446981] pci 0000:00:13.2: reg 10: [mem 0xd4409400-0xd44094ff] [ 0.447071] pci 0000:00:13.2: supports D1 D2 [ 0.447073] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.447079] pci 0000:00:13.2: PME# disabled [ 0.447113] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.447238] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.447266] pci 0000:00:14.2: reg 10: [mem 0xd4400000-0xd4403fff 64bit] [ 0.447340] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.447346] pci 0000:00:14.2: PME# disabled [ 0.447366] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.447465] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.447524] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.447542] pci 0000:00:14.5: reg 10: [mem 0xd4404000-0xd4404fff] [ 0.447632] pci 0000:00:18.0: [1022:1300] type 0 class 0x000600 [ 0.447670] pci 0000:00:18.1: [1022:1301] type 0 class 0x000600 [ 0.447702] pci 0000:00:18.2: [1022:1302] type 0 class 0x000600 [ 0.447736] pci 0000:00:18.3: [1022:1303] type 0 class 0x000600 [ 0.447774] pci 0000:00:18.4: [1022:1304] type 0 class 0x000600 [ 0.447865] pci 0000:01:05.0: [1002:9612] type 0 class 0x000300 [ 0.447880] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.447888] pci 0000:01:05.0: reg 14: [io 0x5000-0x50ff] [ 0.447896] pci 0000:01:05.0: reg 18: [mem 0xd4300000-0xd430ffff] [ 0.447913] pci 0000:01:05.0: reg 24: [mem 0xd4200000-0xd42fffff] [ 0.447935] pci 0000:01:05.0: supports D1 D2 [ 0.448044] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.448050] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.448054] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff] [ 0.448060] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.448183] pci 0000:02:00.0: [11ab:4357] type 0 class 0x000200 [ 0.448230] pci 0000:02:00.0: reg 10: [mem 0xd3100000-0xd3103fff 64bit] [ 0.448245] pci 0000:02:00.0: reg 18: [io 0x3000-0x30ff] [ 0.448370] pci 0000:02:00.0: supports D1 D2 [ 0.448372] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448380] pci 0000:02:00.0: PME# disabled [ 0.456069] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 0.456075] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff] [ 0.456080] pci 0000:00:04.0: bridge window [mem 0xd3100000-0xd41fffff] [ 0.456086] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.456127] pci 0000:00:07.0: PCI bridge to [bus 03-05] [ 0.456133] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff] [ 0.456137] pci 0000:00:07.0: bridge window [mem 0xd2100000-0xd30fffff] [ 0.456143] pci 0000:00:07.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref] [ 0.456282] pci 0000:06:00.0: [14e4:4315] type 0 class 0x000280 [ 0.456305] pci 0000:06:00.0: reg 10: [mem 0xd2000000-0xd2003fff 64bit] [ 0.456392] pci 0000:06:00.0: supports D1 D2 [ 0.464111] pci 0000:00:09.0: PCI bridge to [bus 06-06] [ 0.464117] pci 0000:00:09.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) [ 0.464122] pci 0000:00:09.0: bridge window [mem 0xd2000000-0xd20fffff] [ 0.464128] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.464238] pci 0000:00:14.4: PCI bridge to [bus 80-8f] (subtractive decode) [ 0.464244] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.464250] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.464256] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.464260] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.464263] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.464267] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.464273] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.464276] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.464280] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.464284] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.464287] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.464291] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.464295] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.464298] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.464302] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.464306] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.464310] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.464313] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.464372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.464474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GFX0._PRT] [ 0.464542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.464620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB9_._PRT] [ 0.464695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 0.464865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.464905] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.464909] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.464912] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.472773] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.472840] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.472904] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.472968] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.473032] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.473095] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.473159] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.473223] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.473408] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.473413] vgaarb: loaded [ 0.473414] vgaarb: bridge control possible 0000:01:05.0 [ 0.473471] PCI: Using ACPI for IRQ routing [ 0.484539] PCI: pci_cache_line_size set to 64 bytes [ 0.484861] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.484865] reserve RAM buffer: 00000000acb70000 - 00000000afffffff [ 0.484870] reserve RAM buffer: 00000000afd4f000 - 00000000afffffff [ 0.484874] reserve RAM buffer: 00000000aff00000 - 00000000afffffff [ 0.485074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.485081] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.487110] Switching to clocksource hpet [ 0.487115] Switched to NOHz mode on CPU #0 [ 0.487128] Switched to NOHz mode on CPU #1 [ 0.487128] pnp: PnP ACPI init [ 0.487128] ACPI: bus type pnp registered [ 0.487128] pnp 00:00: [bus 00-ff] [ 0.487128] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.487128] pnp 00:00: [io 0x0d00-0xffff window] [ 0.487128] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.487128] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.487128] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.487128] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.487128] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.487128] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.487128] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.487128] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.487128] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.487128] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.487128] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.487128] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.487128] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.487128] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 0.487128] pnp 00:00: [mem 0xf0000000-0xfffdffff window] [ 0.487128] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.487128] pnp 00:00: [mem 0xffe00000-0xffffffff] [ 0.487128] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.487128] pnp 00:01: [io 0x0000-0x000f] [ 0.487128] pnp 00:01: [io 0x0081-0x008f] [ 0.487128] pnp 00:01: [io 0x00c0-0x00df] [ 0.487128] pnp 00:01: [dma 4] [ 0.487128] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.487135] pnp 00:02: [io 0x00f0-0x00fe] [ 0.487184] pnp 00:02: [irq 13] [ 0.487235] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.487249] pnp 00:03: [io 0x0061] [ 0.487302] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.487367] pnp 00:04: [io 0x0010-0x001f] [ 0.487370] pnp 00:04: [io 0x002e-0x002f] [ 0.487373] pnp 00:04: [io 0x004e-0x004f] [ 0.487376] pnp 00:04: [io 0x0072-0x0073] [ 0.487379] pnp 00:04: [io 0x0080] [ 0.487381] pnp 00:04: [io 0x00b0-0x00b1] [ 0.487384] pnp 00:04: [io 0x0092] [ 0.487387] pnp 00:04: [io 0x0400-0x04cf] [ 0.487390] pnp 00:04: [io 0x04d0-0x04d1] [ 0.487392] pnp 00:04: [io 0x04d6] [ 0.487396] pnp 00:04: [io 0x0680-0x06ff] [ 0.487399] pnp 00:04: [io 0x077a] [ 0.487402] pnp 00:04: [io 0x0c00-0x0c01] [ 0.487405] pnp 00:04: [io 0x0c14] [ 0.487408] pnp 00:04: [io 0x0c50-0x0c52] [ 0.487410] pnp 00:04: [io 0x0c6c] [ 0.487413] pnp 00:04: [io 0x0c6f] [ 0.487416] pnp 00:04: [io 0x0cd0-0x0cdb] [ 0.487419] pnp 00:04: [io 0x0220-0x0227] [ 0.487422] pnp 00:04: [io 0x0260-0x0273] [ 0.487425] pnp 00:04: [io 0x0800] [ 0.487427] pnp 00:04: [io 0x0804] [ 0.487430] pnp 00:04: [io 0x087f] [ 0.487433] pnp 00:04: [io 0x0cdc-0x0cdf] [ 0.487436] pnp 00:04: [io 0x00b8] [ 0.487438] pnp 00:04: [io 0x0022-0x0023] [ 0.487441] pnp 00:04: [io 0x0b00-0x0b0f] [ 0.487444] pnp 00:04: [io 0x0b20-0x0b3f] [ 0.487447] pnp 00:04: [io 0x0200-0x027f] [ 0.487574] system 00:04: [io 0x0400-0x04cf] has been reserved [ 0.487578] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.487582] system 00:04: [io 0x04d6] has been reserved [ 0.487585] system 00:04: [io 0x0680-0x06ff] has been reserved [ 0.487589] system 00:04: [io 0x077a] has been reserved [ 0.487592] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.487596] system 00:04: [io 0x0c14] has been reserved [ 0.487599] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.487603] system 00:04: [io 0x0c6c] has been reserved [ 0.487606] system 00:04: [io 0x0c6f] has been reserved [ 0.487610] system 00:04: [io 0x0cd0-0x0cdb] has been reserved [ 0.487614] system 00:04: [io 0x0220-0x0227] has been reserved [ 0.487617] system 00:04: [io 0x0260-0x0273] has been reserved [ 0.487621] system 00:04: [io 0x0800] has been reserved [ 0.487625] system 00:04: [io 0x0804] has been reserved [ 0.487628] system 00:04: [io 0x087f] has been reserved [ 0.487632] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.487636] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.487639] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.487643] system 00:04: [io 0x0200-0x027f] could not be reserved [ 0.487647] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.487709] pnp 00:05: [mem 0x00000000-0x0009ffff] [ 0.487712] pnp 00:05: [mem 0x000ec000-0x000fffff] [ 0.487716] pnp 00:05: [mem 0x00100000-0xbfffffff] [ 0.487719] pnp 00:05: [mem 0xe0000000-0xefffffff] [ 0.487722] pnp 00:05: [mem 0xfeb00000-0xfeb00fff] [ 0.487725] pnp 00:05: [mem 0xfec00000-0xfec00fff] [ 0.487728] pnp 00:05: [mem 0xfee00000-0xfee00fff] [ 0.487731] pnp 00:05: [mem 0xffe00000-0xffffffff] [ 0.487816] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.487820] system 00:05: [mem 0x000ec000-0x000fffff] could not be reserved [ 0.487824] system 00:05: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.487829] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.487833] system 00:05: [mem 0xfeb00000-0xfeb00fff] has been reserved [ 0.487837] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.487841] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.487845] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved [ 0.487848] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.487919] pnp 00:06: [io 0x0070-0x0071] [ 0.487927] pnp 00:06: [irq 8] [ 0.487983] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.488182] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 0.488242] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.488286] pnp 00:08: [io 0x0060] [ 0.488290] pnp 00:08: [io 0x0064] [ 0.488330] pnp 00:08: [irq 1] [ 0.488388] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.488439] pnp 00:09: [irq 12] [ 0.488496] pnp 00:09: Plug and Play ACPI device, IDs SYN0159 SYN0100 SYN0002 PNP0f13 (active) [ 0.489487] pnp: PnP ACPI: found 10 devices [ 0.489490] ACPI: ACPI bus type pnp unregistered [ 0.496753] PCI: max bus depth: 1 pci_try_num: 2 [ 0.496831] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.496836] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.496841] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff] [ 0.496846] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.496853] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 0.496856] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff] [ 0.496861] pci 0000:00:04.0: bridge window [mem 0xd3100000-0xd41fffff] [ 0.496866] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.496872] pci 0000:00:07.0: PCI bridge to [bus 03-05] [ 0.496875] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff] [ 0.496880] pci 0000:00:07.0: bridge window [mem 0xd2100000-0xd30fffff] [ 0.496885] pci 0000:00:07.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref] [ 0.496891] pci 0000:00:09.0: PCI bridge to [bus 06-06] [ 0.496894] pci 0000:00:09.0: bridge window [io disabled] [ 0.496899] pci 0000:00:09.0: bridge window [mem 0xd2000000-0xd20fffff] [ 0.496903] pci 0000:00:09.0: bridge window [mem pref disabled] [ 0.496909] pci 0000:00:14.4: PCI bridge to [bus 80-8f] [ 0.496947] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.496954] pci 0000:00:14.4: bridge window [mem disabled] [ 0.496959] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.496977] pci 0000:00:01.0: setting latency timer to 64 [ 0.496985] pci 0000:00:04.0: setting latency timer to 64 [ 0.496992] pci 0000:00:07.0: setting latency timer to 64 [ 0.497000] pci 0000:00:09.0: setting latency timer to 64 [ 0.497010] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.497013] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.497017] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.497020] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.497023] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.497026] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.497029] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.497032] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.497035] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.497038] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.497041] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.497044] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.497047] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.497050] pci_bus 0000:00: resource 17 [mem 0xc0000000-0xdfffffff] [ 0.497053] pci_bus 0000:00: resource 18 [mem 0xf0000000-0xffffffff] [ 0.497057] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.497060] pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff] [ 0.497063] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.497067] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff] [ 0.497070] pci_bus 0000:02: resource 1 [mem 0xd3100000-0xd41fffff] [ 0.497073] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.497076] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.497079] pci_bus 0000:03: resource 1 [mem 0xd2100000-0xd30fffff] [ 0.497082] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref] [ 0.497086] pci_bus 0000:06: resource 1 [mem 0xd2000000-0xd20fffff] [ 0.497089] pci_bus 0000:80: resource 0 [io 0x1000-0x1fff] [ 0.497092] pci_bus 0000:80: resource 4 [io 0x0000-0x0cf7] [ 0.497095] pci_bus 0000:80: resource 5 [io 0x0d00-0xffff] [ 0.497098] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff] [ 0.497101] pci_bus 0000:80: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.497104] pci_bus 0000:80: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.497107] pci_bus 0000:80: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.497110] pci_bus 0000:80: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.497113] pci_bus 0000:80: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.497116] pci_bus 0000:80: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.497119] pci_bus 0000:80: resource 13 [mem 0x000dc000-0x000dffff] [ 0.497122] pci_bus 0000:80: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.497125] pci_bus 0000:80: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.497128] pci_bus 0000:80: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.497131] pci_bus 0000:80: resource 17 [mem 0xc0000000-0xdfffffff] [ 0.497134] pci_bus 0000:80: resource 18 [mem 0xf0000000-0xffffffff] [ 0.497324] NET: Registered protocol family 2 [ 0.497588] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.499611] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.504854] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.505446] TCP: Hash tables configured (established 524288 bind 65536) [ 0.505450] TCP reno registered [ 0.505469] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.505526] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.505855] NET: Registered protocol family 1 [ 0.505873] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.506045] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.506080] pci 0000:01:05.0: Boot video device [ 0.506149] Unpacking initramfs... [ 0.810813] Freeing initrd memory: 10308k freed [ 0.817740] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.817746] Placing 64MB software IO TLB between ffff8800a8b70000 - ffff8800acb70000 [ 0.817749] software IO TLB at phys 0xa8b70000 - 0xacb70000 [ 0.818518] audit: initializing netlink socket (disabled) [ 0.818535] type=2000 audit(1314102072.816:1): initialized [ 0.851712] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.888299] VFS: Disk quotas dquot_6.5.2 [ 0.888394] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.888543] msgmni has been set to 7419 [ 0.888874] alg: No test for stdrng (krng) [ 0.888951] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.888957] io scheduler noop registered [ 0.888960] io scheduler deadline registered [ 0.889035] io scheduler cfq registered (default) [ 0.889207] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.889260] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X [ 0.889337] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.889375] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X [ 0.889439] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.889480] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X [ 0.889710] ERST: Table is not found! [ 0.889820] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.932771] Linux agpgart interface v0.103 [ 0.932931] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.934923] i8042: Detected active multiplexing controller, rev 1.1 [ 0.935944] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.935956] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.936067] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.936097] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.936130] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.936279] mousedev: PS/2 mouse device common for all mice [ 0.936379] rtc_cmos 00:06: RTC can wake from S4 [ 0.936505] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.936580] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 0.936595] cpuidle: using governor ladder [ 0.936598] cpuidle: using governor menu [ 0.936905] TCP cubic registered [ 0.937066] NET: Registered protocol family 10 [ 0.937887] Mobile IPv6 [ 0.937891] NET: Registered protocol family 17 [ 0.937897] Registering the dns_resolver key type [ 0.938057] PM: Hibernation image not present or could not be loaded. [ 0.938076] registered taskstats version 1 [ 0.956709] rtc_cmos 00:06: setting system clock to 2011-08-23 12:21:13 UTC (1314102073) [ 0.956777] Initializing network drop monitor service [ 0.958249] Freeing unused kernel memory: 560k freed [ 0.958553] Write protecting the kernel read-only data: 6144k [ 0.962963] Freeing unused kernel memory: 756k freed [ 0.968029] Freeing unused kernel memory: 740k freed [ 0.977794] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.064995] udevd[51]: starting version 172 [ 1.102688] sky2: driver version 1.28 [ 1.102789] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.102842] sky2 0000:02:00.0: setting latency timer to 64 [ 1.102923] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0 [ 1.103092] sky2 0000:02:00.0: irq 43 for MSI/MSI-X [ 1.142188] sky2 0000:02:00.0: eth0: addr d8:d3:85:1c:55:54 [ 1.149643] usbcore: registered new interface driver usbfs [ 1.149679] usbcore: registered new interface driver hub [ 1.155334] usbcore: registered new device driver usb [ 1.156103] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.156191] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.156221] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 1.156226] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.156270] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.156319] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.156358] QUIRK: Enable AMD PLL fix [ 1.156363] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.156421] ehci_hcd 0000:00:12.2: debug port 1 [ 1.156458] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd4409500 [ 1.158611] SCSI subsystem initialized [ 1.168171] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.168216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.168220] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.168223] usb usb1: Product: EHCI Host Controller [ 1.168226] usb usb1: Manufacturer: Linux 3.0.0-1-amd64 ehci_hcd [ 1.168228] usb usb1: SerialNumber: 0000:00:12.2 [ 1.168431] hub 1-0:1.0: USB hub found [ 1.168439] hub 1-0:1.0: 6 ports detected [ 1.168652] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.168739] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 1.168744] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.168760] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.168775] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.168804] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.168821] ehci_hcd 0000:00:13.2: debug port 1 [ 1.168856] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4409400 [ 1.180123] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.180175] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.180178] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.180182] usb usb2: Product: EHCI Host Controller [ 1.180185] usb usb2: Manufacturer: Linux 3.0.0-1-amd64 ehci_hcd [ 1.180187] usb usb2: SerialNumber: 0000:00:13.2 [ 1.180379] hub 2-0:1.0: USB hub found [ 1.180386] hub 2-0:1.0: 6 ports detected [ 1.189261] libata version 3.00 loaded. [ 1.190306] ahci 0000:00:11.0: version 3.0 [ 1.190373] ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.190497] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.190502] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio ccc [ 1.198144] scsi0 : ahci [ 1.210664] scsi1 : ahci [ 1.213574] ata1: SATA max UDMA/133 abar m1024@0xd4409000 port 0xd4409100 irq 20 [ 1.213581] ata2: SATA max UDMA/133 abar m1024@0xd4409000 port 0xd4409180 irq 20 [ 1.213745] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.213748] ACPI: Thermal Zone [CPUZ] (56 C) [ 1.213918] ACPI: Fan [FAN0] (off) [ 1.213998] ACPI: Fan [FAN1] (off) [ 1.214072] ACPI: Fan [FAN2] (off) [ 1.214152] ACPI: Fan [FAN3] (off) [ 1.214229] ACPI: Fan [FAN4] (off) [ 1.214300] ACPI: Fan [FAN6] (off) [ 1.214370] ACPI: Fan [FAN7] (off) [ 1.214439] ACPI: Fan [FAN8] (off) [ 1.214509] ACPI: Fan [FAN9] (off) [ 1.214577] ACPI: Fan [FANA] (off) [ 1.214632] ACPI: Fan [FANG] (off) [ 1.217031] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.217035] ACPI: Thermal Zone [GFXZ] (30 C) [ 1.261163] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.261237] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.261268] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 1.261273] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.261293] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.261395] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd4408000 [ 1.320098] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.320104] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.320107] usb usb3: Product: OHCI Host Controller [ 1.320110] usb usb3: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd [ 1.320113] usb usb3: SerialNumber: 0000:00:12.0 [ 1.320294] hub 3-0:1.0: USB hub found [ 1.320303] hub 3-0:1.0: 3 ports detected [ 1.320496] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.320577] ohci_hcd 0000:00:12.1: setting latency timer to 64 [ 1.320581] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.320601] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.320636] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd4407000 [ 1.380086] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.380090] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.380093] usb usb4: Product: OHCI Host Controller [ 1.380095] usb usb4: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd [ 1.380098] usb usb4: SerialNumber: 0000:00:12.1 [ 1.380222] hub 4-0:1.0: USB hub found [ 1.380231] hub 4-0:1.0: 3 ports detected [ 1.380318] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.380340] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 1.380344] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.380354] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.380379] ohci_hcd 0000:00:13.0: irq 17, io mem 0xd4406000 [ 1.440074] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.440077] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.440080] usb usb5: Product: OHCI Host Controller [ 1.440083] usb usb5: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd [ 1.440085] usb usb5: SerialNumber: 0000:00:13.0 [ 1.440195] hub 5-0:1.0: USB hub found [ 1.440203] hub 5-0:1.0: 3 ports detected [ 1.440283] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.440300] ohci_hcd 0000:00:13.1: setting latency timer to 64 [ 1.440305] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.440313] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.440334] ohci_hcd 0000:00:13.1: irq 17, io mem 0xd4405000 [ 1.480073] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 1.500074] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.500077] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.500080] usb usb6: Product: OHCI Host Controller [ 1.500083] usb usb6: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd [ 1.500085] usb usb6: SerialNumber: 0000:00:13.1 [ 1.500207] hub 6-0:1.0: USB hub found [ 1.500215] hub 6-0:1.0: 3 ports detected [ 1.500315] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.500337] ohci_hcd 0000:00:14.5: setting latency timer to 64 [ 1.500341] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.500354] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.500396] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd4404000 [ 1.544085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.546422] ata1.00: ATA-8: WDC WD3200BEKT-60V5T1, 12.01A12, max UDMA/100 [ 1.546426] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.548078] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.548767] ata1.00: configured for UDMA/100 [ 1.549070] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 12.0 PQ: 0 ANSI: 5 [ 1.560083] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.560087] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.560090] usb usb7: Product: OHCI Host Controller [ 1.560093] usb usb7: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd [ 1.560096] usb usb7: SerialNumber: 0000:00:14.5 [ 1.560256] hub 7-0:1.0: USB hub found [ 1.560266] hub 7-0:1.0: 2 ports detected [ 1.561101] ata2.00: ATAPI: hp DVD RW AD-7581S, 4H73, max UDMA/100 [ 1.574684] ata2.00: configured for UDMA/100 [ 1.578275] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7581S 4H73 PQ: 0 ANSI: 5 [ 1.587266] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.587330] sd 0:0:0:0: [sda] Write Protect is off [ 1.587334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.587361] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.591365] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.591371] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.591555] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.613188] usb 1-1: New USB device found, idVendor=0409, idProduct=005a [ 1.613193] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.613518] hub 1-1:1.0: USB hub found [ 1.613686] hub 1-1:1.0: 4 ports detected [ 1.635117] sda: sda1 sda2 sda3 < sda5 > [ 1.635808] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.638868] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.638924] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.724097] usb 2-2: new high speed USB device number 2 using ehci_hcd [ 1.894802] usb 2-2: New USB device found, idVendor=04f2, idProduct=b159 [ 1.894808] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1.894811] usb 2-2: Product: CNF8243 [ 1.894814] usb 2-2: Manufacturer: Chicony Electronics Co., Ltd. [ 1.894816] usb 2-2: SerialNumber: SN0001 [ 2.135015] PM: Starting manual resume from disk [ 2.135021] PM: Hibernation image partition 8:2 present [ 2.135023] PM: Looking for hibernation image. [ 2.135311] PM: Image not found (code -22) [ 2.135316] PM: Hibernation image not present or could not be loaded. [ 2.187249] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.272039] usb 6-3: new full speed USB device number 2 using ohci_hcd [ 2.445132] usb 6-3: New USB device found, idVendor=03f0, idProduct=231d [ 2.445138] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.445141] usb 6-3: Product: HP Integrated Module [ 2.445144] usb 6-3: Manufacturer: Broadcom Corp [ 2.532589] usb 1-1.3: new low speed USB device number 3 using ehci_hcd [ 2.651701] usb 1-1.3: New USB device found, idVendor=046a, idProduct=0023 [ 2.651707] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.740559] usb 1-1.4: new low speed USB device number 4 using ehci_hcd [ 2.853798] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c069 [ 2.853804] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.853807] usb 1-1.4: Product: USB Laser Mouse [ 2.853810] usb 1-1.4: Manufacturer: Logitech [ 3.416196] udevd[309]: starting version 172 [ 4.078367] lib80211: common routines for IEEE802.11 drivers [ 4.078372] lib80211_crypt: registered algorithm 'NULL' [ 4.133540] ACPI: acpi_idle registered with cpuidle [ 4.141253] ACPI: AC Adapter [AC] (on-line) [ 4.141403] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 4.141411] ACPI: Sleep Button [SLPB] [ 4.141495] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 4.142185] ACPI: Lid Switch [LID] [ 4.142284] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.142289] ACPI: Power Button [PWRF] [ 4.143092] ACPI: Battery Slot [BAT0] (battery absent) [ 4.151588] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.153267] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602 [ 4.153275] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 4.153355] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.164882] wmi: Mapper loaded [ 4.196299] acpi device:02: registered as cooling_device13 [ 4.201687] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 4.212864] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input5 [ 4.212874] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no) [ 4.285830] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 4.317031] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 4.317140] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 4.348801] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 4.649491] Linux media interface: v0.10 [ 4.666999] Linux video capture interface: v2.00 [ 4.670551] Disabling lock debugging due to kernel taint [ 4.670560] wl: module license 'MIXED/Proprietary' taints kernel. [ 4.695010] wl 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.695023] wl 0000:06:00.0: setting latency timer to 64 [ 4.724803] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159) [ 4.782660] input: CNF8243 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input7 [ 4.782757] usbcore: registered new interface driver uvcvideo [ 4.782759] USB Video Class driver (v1.1.0) [ 4.819879] Bluetooth: Core ver 2.16 [ 4.819945] NET: Registered protocol family 31 [ 4.819948] Bluetooth: HCI device and connection manager initialized [ 4.819952] Bluetooth: HCI socket layer initialized [ 4.819955] Bluetooth: L2CAP socket layer initialized [ 4.820478] Bluetooth: SCO socket layer initialized [ 4.827503] lib80211_crypt: registered algorithm 'TKIP' [ 4.827943] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [ 4.857707] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 4.884885] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 4.885623] usbcore: registered new interface driver btusb [ 4.900629] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 5.259805] [fglrx] Maximum main memory to use for locked dma buffers: 3553 MBytes. [ 5.259886] [fglrx] vendor: 1002 device: 9612 count: 1 [ 5.260404] [fglrx] ioport: bar 1, base 0x5000, size: 0x100 [ 5.260423] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.260429] pci 0000:01:05.0: setting latency timer to 64 [ 5.260870] [fglrx] Kernel PAT support is enabled [ 5.260906] [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1 minors [ 5.339899] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 5.339910] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 5.339922] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.393007] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9 [ 5.408229] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 5.408330] input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 5.767059] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.0/input/input12 [ 5.767229] generic-usb 0003:046D:C069.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.2-1.4/input0 [ 5.767257] usbcore: registered new interface driver usbhid [ 5.767260] usbhid: USB HID core driver [ 5.873975] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.0/input/input13 [ 5.874162] cherry 0003:046A:0023.0001: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:12.2-1.3/input0 [ 5.884411] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.1/input/input14 [ 5.884568] cherry 0003:046A:0023.0002: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:12.2-1.3/input1 [ 6.376209] hp_wmi: Unknown event_id - 0 - 0x0 [ 6.609424] Adding 4095996k swap on /dev/sda2. Priority:-1 extents:1 across:4095996k [ 6.615273] EXT4-fs (sda1): re-mounted. Opts: (null) [ 6.746661] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 6.892504] device-mapper: uevent: version 1.0.3 [ 6.892631] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx [ 24.857776] Intel AES-NI instructions are not detected. [ 24.896456] padlock_aes: VIA PadLock not detected. [ 24.925092] padlock_sha: VIA PadLock Hash Engine not detected. [ 25.439412] loop: module loaded [ 25.940096] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 26.299661] fuse init (API version 7.16) [ 28.028734] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 29.279470] sky2 0000:02:00.0: eth0: enabling interface [ 29.280597] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.514454] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.514459] Bluetooth: BNEP filters: protocol multicast [ 30.608122] Bluetooth: RFCOMM TTY layer initialized [ 30.608130] Bluetooth: RFCOMM socket layer initialized [ 30.608132] Bluetooth: RFCOMM ver 1.11
