Re: [PATCH v5 4/6] PCI: brcmstb: Add control of subdevice voltage regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 22, 2021 at 03:15:59PM -0400, Jim Quinlan wrote:

> Each different SOC./board we deal with may present different ways of
> making the EP device power on.  We are using
> an abstraction name "brcm-ep-a"  to represent some required regulator
> to make the EP  work for a specific board.  The RC
> driver cannot hard code a descriptive name as it must work for all
> boards designed by us, others, and third parties.
> The EP driver also doesn't know  or care about the regulator name, and
> this driver is often closed source and often immutable.  The EP
> device itself may come from Brcm, a third party,  or sometimes a competitor.

> Basically, we find using a generic name such as "brcm-ep-a-supply"
> quite handy and many of our customers embrace this feature.
> I know that Rob was initially against such a generic name, but I
> vaguely remember him seeing some merit to this, perhaps a tiny bit :-)
> Or my memory is shot, which could very well be the case.

That sounds like it just shouldn't be a regulator at all, perhaps the
board happens to need a regulator there but perhaps it needs a clock,
GPIO or some specific sequence of actions.  It sounds like you need some
sort of quirking mechanism to cope with individual boards with board
specific bindings.

I'd suggest as a first pass omitting this and then looking at some
actual systems later when working out how to support them, no sense in
getting the main thing held up by difficult edge cases.

> > > +     /* This is for Broadcom STB/CM chips only */
> > > +     if (pcie->type == BCM2711)
> > > +             return 0;

> > It is a relief that other chips have managed to work out how to avoid
> > requiring power.

> I'm not sure that the other Broadcom groups have our customers, our
> customers' requirements, and the amount and variation of boards that
> run our PCIe driver on the SOC.

Sure, but equally they might (even if they didn't spot it yet) and in
general it's safer to err on the side of describing the hardware so we
can use that information later.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux