An MMIO read from a PCI device that doesn't exist or doesn't respond causes a PCI error. There's no real data to return to satisfy the CPU read, so most hardware fabricates ~0 data. Use RESPONSE_IS_PCI_ERROR() to check the response we get when we read data from hardware. This helps unify PCI error response checking and make error checks consistent and easier to find. Compile tested only. Signed-off-by: Naveen Naidu <naveennaidu479@xxxxxxxxx> --- drivers/pci/pcie/dpc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c index c556e7beafe3..4a051a096075 100644 --- a/drivers/pci/pcie/dpc.c +++ b/drivers/pci/pcie/dpc.c @@ -79,7 +79,7 @@ static bool dpc_completed(struct pci_dev *pdev) u16 status; pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_STATUS, &status); - if ((status != 0xffff) && (status & PCI_EXP_DPC_STATUS_TRIGGER)) + if ((!RESPONSE_IS_PCI_ERROR(status)) && (status & PCI_EXP_DPC_STATUS_TRIGGER)) return false; if (test_bit(PCI_DPC_RECOVERING, &pdev->priv_flags)) @@ -312,7 +312,7 @@ static irqreturn_t dpc_irq(int irq, void *context) pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status); - if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || status == (u16)(~0)) + if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || RESPONSE_IS_PCI_ERROR(status)) return IRQ_NONE; pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS, -- 2.25.1
