Re: [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling unbalance when link never came up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 15, 2021 at 02:05:40PM +0800, Richard Zhu wrote:
> When link never came up, driver probe would be failed with error -110.
> To keep usage counter balance of the clocks, disable the previous
> enabled clocks when link is down.
> Move definitions of the imx6_pcie_clk_disable() function to the proper
> place. Because it wouldn't be used in imx6_pcie_suspend_noirq() only.

Add blank line between paragraphs.

Can you please split this into two patches:

  1) the imx6_pcie_clk_disable() move
  2) the actual fix

It's hard to tell exactly where the fix is when things are mixed
together.

> Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 47 ++++++++++++++-------------
>  1 file changed, 24 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index cc837f8bf6d4..d6a5d99ffa52 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -514,6 +514,29 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
>  	return ret;
>  }
>  
> +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
> +{
> +	clk_disable_unprepare(imx6_pcie->pcie);
> +	clk_disable_unprepare(imx6_pcie->pcie_phy);
> +	clk_disable_unprepare(imx6_pcie->pcie_bus);
> +
> +	switch (imx6_pcie->drvdata->variant) {
> +	case IMX6SX:
> +		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> +		break;
> +	case IMX7D:
> +		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> +				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> +				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> +		break;
> +	case IMX8MQ:
> +		clk_disable_unprepare(imx6_pcie->pcie_aux);
> +		break;
> +	default:
> +		break;
> +	}
> +}
> +
>  static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
>  {
>  	u32 val;
> @@ -853,6 +876,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
>  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
>  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
>  	imx6_pcie_reset_phy(imx6_pcie);
> +	imx6_pcie_clk_disable(imx6_pcie);
>  	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
>  		regulator_disable(imx6_pcie->vpcie);
>  	return ret;
> @@ -941,29 +965,6 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
>  	usleep_range(1000, 10000);
>  }
>  
> -static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
> -{
> -	clk_disable_unprepare(imx6_pcie->pcie);
> -	clk_disable_unprepare(imx6_pcie->pcie_phy);
> -	clk_disable_unprepare(imx6_pcie->pcie_bus);
> -
> -	switch (imx6_pcie->drvdata->variant) {
> -	case IMX6SX:
> -		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> -		break;
> -	case IMX7D:
> -		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> -		break;
> -	case IMX8MQ:
> -		clk_disable_unprepare(imx6_pcie->pcie_aux);
> -		break;
> -	default:
> -		break;
> -	}
> -}
> -
>  static int imx6_pcie_suspend_noirq(struct device *dev)
>  {
>  	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> -- 
> 2.25.1
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux