Am Freitag, dem 15.10.2021 um 14:05 +0800 schrieb Richard Zhu:
> When link never came up, driver probe would be failed with error -110.
> To keep usage counter balance of the clocks, disable the previous
> enabled clocks when link is down.
> Move definitions of the imx6_pcie_clk_disable() function to the proper
> place. Because it wouldn't be used in imx6_pcie_suspend_noirq() only.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 47 ++++++++++++++-------------
> 1 file changed, 24 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index cc837f8bf6d4..d6a5d99ffa52 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -514,6 +514,29 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
> return ret;
> }
>
> +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
> +{
> + clk_disable_unprepare(imx6_pcie->pcie);
> + clk_disable_unprepare(imx6_pcie->pcie_phy);
> + clk_disable_unprepare(imx6_pcie->pcie_bus);
> +
> + switch (imx6_pcie->drvdata->variant) {
> + case IMX6SX:
> + clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> + break;
> + case IMX7D:
> + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> + IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> + IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> + break;
> + case IMX8MQ:
> + clk_disable_unprepare(imx6_pcie->pcie_aux);
> + break;
> + default:
> + break;
> + }
> +}
> +
> static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
> {
> u32 val;
> @@ -853,6 +876,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
> dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
> dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
> imx6_pcie_reset_phy(imx6_pcie);
> + imx6_pcie_clk_disable(imx6_pcie);
Same comment as with the previous patch. We should not cram in more
error handling in the imx6_pcie_start_link function, but rather move
out all the error handling to be after dw_pcie_host_init. Even the
already existing phy reset here seems misplaced and should be moved
out.
Regards,
Lucas
> if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
> regulator_disable(imx6_pcie->vpcie);
> return ret;
> @@ -941,29 +965,6 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
> usleep_range(1000, 10000);
> }
>
> -static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
> -{
> - clk_disable_unprepare(imx6_pcie->pcie);
> - clk_disable_unprepare(imx6_pcie->pcie_phy);
> - clk_disable_unprepare(imx6_pcie->pcie_bus);
> -
> - switch (imx6_pcie->drvdata->variant) {
> - case IMX6SX:
> - clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> - break;
> - case IMX7D:
> - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> - IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> - IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> - break;
> - case IMX8MQ:
> - clk_disable_unprepare(imx6_pcie->pcie_aux);
> - break;
> - default:
> - break;
> - }
> -}
> -
> static int imx6_pcie_suspend_noirq(struct device *dev)
> {
> struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
