The id, status and the mask fields of the struct aer_err_info comes
directly from the registers, hence their sizes should be explicit.
The length of these registers are:
- id: 16 bits - Represents the Error Source Requester ID
- status: 32 bits - COR/UNCOR Error Status
- mask: 32 bits - COR/UNCOR Error Mask
Since the length of the above registers are even, use u16 and u32
to represent their values.
Also remove the __pad fields.
"pahole" was run on the modified struct aer_err_info and the size
remains unchanged.
Signed-off-by: Naveen Naidu <naveennaidu479@xxxxxxxxx>
---
drivers/pci/pci.h | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 1cce56c2aea0..9be7a966fda7 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -427,18 +427,16 @@ struct aer_err_info {
struct pci_dev *dev[AER_MAX_MULTI_ERR_DEVICES];
int error_dev_num;
- unsigned int id:16;
+ u16 id;
unsigned int severity:2; /* 0:NONFATAL | 1:FATAL | 2:COR */
- unsigned int __pad1:5;
unsigned int multi_error_valid:1;
unsigned int first_error:5;
- unsigned int __pad2:2;
unsigned int tlp_header_valid:1;
- unsigned int status; /* COR/UNCOR Error Status */
- unsigned int mask; /* COR/UNCOR Error Mask */
+ u32 status; /* COR/UNCOR Error Status */
+ u32 mask; /* COR/UNCOR Error Mask */
struct aer_header_log_regs tlp; /* TLP Header */
};
--
2.25.1
