Re: [PATCH 09/13] PCI: aardvark: Implement re-issuing config requests on CRS response

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 01, 2021 at 09:58:52PM +0200, Marek Behún wrote:
> From: Pali Rohár <pali@xxxxxxxxxx>
> 
> Commit 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") fixed
> handling of CRS response and when CRSSVE flag was not enabled it marked CRS
> response as failed transaction (due to simplicity).
> 
> But pci-aardvark.c driver is already waiting up to the PIO_RETRY_CNT count
> for PIO config response and so we can with a small change implement
> re-issuing of config requests as described in PCIe base specification.
> 
> This change implements re-issuing of config requests when response is CRS.
> Set upper bound of wait cycles to around PIO_RETRY_CNT, afterwards the
> transaction is marked as failed and an all-ones value is returned as
> before.

Does this fix a problem?

> We do this by returning appropriate error codes from function
> advk_pcie_check_pio_status(). On CRS we return -EAGAIN and caller then
> reissues transaction.
> 
> Fixes: 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value")
> Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> Reviewed-by: Marek Behún <kabel@xxxxxxxxxx>
> Signed-off-by: Marek Behún <kabel@xxxxxxxxxx>
> ---
>  drivers/pci/controller/pci-aardvark.c | 67 +++++++++++++++++----------
>  1 file changed, 43 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> index 51d2955d9cca..7b9870d0b81f 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -603,6 +603,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
>  	u32 reg;
>  	unsigned int status;
>  	char *strcomp_status, *str_posted;
> +	int ret;
>  
>  	reg = advk_readl(pcie, PIO_STAT);
>  	status = (reg & PIO_COMPLETION_STATUS_MASK) >>
> @@ -627,6 +628,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
>  	case PIO_COMPLETION_STATUS_OK:
>  		if (reg & PIO_ERR_STATUS) {
>  			strcomp_status = "COMP_ERR";
> +			ret = -EFAULT;
>  			break;
>  		}
>  		/* Get the read result */
> @@ -634,9 +636,11 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
>  			*val = advk_readl(pcie, PIO_RD_DATA);
>  		/* No error */
>  		strcomp_status = NULL;
> +		ret = 0;
>  		break;
>  	case PIO_COMPLETION_STATUS_UR:
>  		strcomp_status = "UR";
> +		ret = -EOPNOTSUPP;
>  		break;
>  	case PIO_COMPLETION_STATUS_CRS:
>  		if (allow_crs && val) {
> @@ -654,6 +658,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
>  			 */
>  			*val = CFG_RD_CRS_VAL;
>  			strcomp_status = NULL;
> +			ret = 0;
>  			break;
>  		}
>  		/* PCIe r4.0, sec 2.3.2, says:
> @@ -669,21 +674,24 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
>  		 * Request and taking appropriate action, e.g., complete the
>  		 * Request to the host as a failed transaction.
>  		 *
> -		 * To simplify implementation do not re-issue the Configuration
> -		 * Request and complete the Request as a failed transaction.
> +		 * So return -EAGAIN and caller (pci-aardvark.c driver) will
> +		 * re-issue request again up to the PIO_RETRY_CNT retries.
>  		 */
>  		strcomp_status = "CRS";
> +		ret = -EAGAIN;
>  		break;
>  	case PIO_COMPLETION_STATUS_CA:
>  		strcomp_status = "CA";
> +		ret = -ECANCELED;
>  		break;
>  	default:
>  		strcomp_status = "Unknown";
> +		ret = -EINVAL;
>  		break;
>  	}
>  
>  	if (!strcomp_status)
> -		return 0;
> +		return ret;
>  
>  	if (reg & PIO_NON_POSTED_REQ)
>  		str_posted = "Non-posted";
> @@ -693,7 +701,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
>  	dev_dbg(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
>  		str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
>  
> -	return -EFAULT;
> +	return ret;
>  }
>  
>  static int advk_pcie_wait_pio(struct advk_pcie *pcie)
> @@ -701,13 +709,13 @@ static int advk_pcie_wait_pio(struct advk_pcie *pcie)
>  	struct device *dev = &pcie->pdev->dev;
>  	int i;
>  
> -	for (i = 0; i < PIO_RETRY_CNT; i++) {
> +	for (i = 1; i <= PIO_RETRY_CNT; i++) {
>  		u32 start, isr;
>  
>  		start = advk_readl(pcie, PIO_START);
>  		isr = advk_readl(pcie, PIO_ISR);
>  		if (!start && isr)
> -			return 0;
> +			return i;
>  		udelay(PIO_RETRY_DELAY);
>  	}
>  
> @@ -898,6 +906,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
>  			     int where, int size, u32 *val)
>  {
>  	struct advk_pcie *pcie = bus->sysdata;
> +	int retry_count;
>  	bool allow_crs;
>  	u32 reg;
>  	int ret;
> @@ -940,16 +949,22 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
>  	/* Program the data strobe */
>  	advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
>  
> -	/* Clear PIO DONE ISR and start the transfer */
> -	advk_writel(pcie, 1, PIO_ISR);
> -	advk_writel(pcie, 1, PIO_START);
> +	retry_count = 0;
> +	do {
> +		/* Clear PIO DONE ISR and start the transfer */
> +		advk_writel(pcie, 1, PIO_ISR);
> +		advk_writel(pcie, 1, PIO_START);
>  
> -	ret = advk_pcie_wait_pio(pcie);
> -	if (ret < 0)
> -		goto try_crs;
> +		ret = advk_pcie_wait_pio(pcie);
> +		if (ret < 0)
> +			goto try_crs;
> +
> +		retry_count += ret;
> +
> +		/* Check PIO status and get the read result */
> +		ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
> +	} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
>  
> -	/* Check PIO status and get the read result */
> -	ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
>  	if (ret < 0)
>  		goto fail;
>  
> @@ -981,6 +996,7 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
>  	struct advk_pcie *pcie = bus->sysdata;
>  	u32 reg;
>  	u32 data_strobe = 0x0;
> +	int retry_count;
>  	int offset;
>  	int ret;
>  
> @@ -1022,19 +1038,22 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
>  	/* Program the data strobe */
>  	advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
>  
> -	/* Clear PIO DONE ISR and start the transfer */
> -	advk_writel(pcie, 1, PIO_ISR);
> -	advk_writel(pcie, 1, PIO_START);
> +	retry_count = 0;
> +	do {
> +		/* Clear PIO DONE ISR and start the transfer */
> +		advk_writel(pcie, 1, PIO_ISR);
> +		advk_writel(pcie, 1, PIO_START);
>  
> -	ret = advk_pcie_wait_pio(pcie);
> -	if (ret < 0)
> -		return PCIBIOS_SET_FAILED;
> +		ret = advk_pcie_wait_pio(pcie);
> +		if (ret < 0)
> +			return PCIBIOS_SET_FAILED;
>  
> -	ret = advk_pcie_check_pio_status(pcie, false, NULL);
> -	if (ret < 0)
> -		return PCIBIOS_SET_FAILED;
> +		retry_count += ret;
>  
> -	return PCIBIOS_SUCCESSFUL;
> +		ret = advk_pcie_check_pio_status(pcie, false, NULL);
> +	} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
> +
> +	return ret < 0 ? PCIBIOS_SET_FAILED : PCIBIOS_SUCCESSFUL;
>  }
>  
>  static struct pci_ops advk_pcie_ops = {
> -- 
> 2.32.0
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux