[PATCH] iommu: parse pci device scope even only intr remap is defined.
Andrew found when CONFIG_DMAR=N and CONFIG_INTR_REMAP=Y:
> [ 1137.271447] qla2xxx 0000:18:00.0: irq 97 for MSI/MSI-X
> [ 1137.271706] qla2xxx 0000:18:00.0: Configuring PCI space...
> [ 1137.271725] qla2xxx 0000:18:00.0: setting latency timer to 64
> [ 1137.271732] qla2xxx 0000:18:00.0: enabling Mem-Wr-Inval
> [ 1137.278705] DRHD: handling fault status reg 2
> [ 1137.278715] INTR-REMAP: Request device [[18:00.0] fault index 20
> [ 1137.278717] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear
> [ 1159.389099] qla2xxx 0000:0c:07.0: Cable is unplugged...
> [ 1167.218478] qla2xxx 0000:18:00.0: Mailbox command timeout occurred. Scheduling ISP abort. eeh_busy: 0x0
> [ 1167.218490] qla2xxx 0000:18:00.0: Unable to burst-read optrom segment (100/7ff50400/18389b000).
> [ 1167.218496] qla2xxx 0000:18:00.0: Reverting to slow-read.
> [ 1197.174623] qla2xxx 0000:18:00.0: Unable to burst-read optrom segment (100/7ff50000/18389b000).
> [ 1197.174632] qla2xxx 0000:18:00.0: Reverting to slow-read.
> [ 1197.190613] qla2xxx 0000:18:00.0: Configure NVRAM parameters...
> [ 1197.198582] qla2xxx 0000:18:00.0: Verifying loaded RISC code...
> [ 1227.142951] qla2xxx 0000:18:00.0: Failed mailbox send register test
> [ 1227.142959] qla2xxx 0000:18:00.0: Failed to initialize adapter
It turns out that path, pci devices will not be link to drhd, so later all pci
devices will point to default drhd when using intr-remap.
Suresh pointed out:
| This issue is caused by this commit:
|
| commit 9d5ce73a64be2be8112147a3e0b551ad9cd1247b
| Author: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
| Date: Tue Nov 10 19:46:16 2009 +0900
|
| x86: intel-iommu: Convert detect_intel_iommu to use iommu_init hook
|
| So this is a regression
Try to fix the path with calling dmar_dev_scope_init() in intel_iommu_init()
Reported-and-tested-by: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Reviewed-by: Suresh Siddha <suresh.b.siddha@xxxxxxxxx>
Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
---
drivers/iommu/dmar.c | 10 ++++++++++
include/linux/dmar.h | 4 +---
2 files changed, 11 insertions(+), 3 deletions(-)
Index: linux-2.6/include/linux/dmar.h
===================================================================
--- linux-2.6.orig/include/linux/dmar.h
+++ linux-2.6/include/linux/dmar.h
@@ -232,9 +232,7 @@ struct dmar_atsr_unit {
#define for_each_atsr_unit(atsr) \
list_for_each_entry(atsr, &dmar_atsr_units, list)
-extern int intel_iommu_init(void);
-#else /* !CONFIG_DMAR: */
-static inline int intel_iommu_init(void) { return -ENODEV; }
#endif /* CONFIG_DMAR */
+extern int intel_iommu_init(void);
#endif /* __DMAR_H__ */
Index: linux-2.6/drivers/iommu/dmar.c
===================================================================
--- linux-2.6.orig/drivers/iommu/dmar.c
+++ linux-2.6/drivers/iommu/dmar.c
@@ -722,6 +722,16 @@ int __init detect_intel_iommu(void)
return ret ? 1 : -ENODEV;
}
+#ifndef CONFIG_DMAR
+/* When intr remapping is used but dmar remapping is not defined */
+int __init intel_iommu_init(void)
+{
+ if (dmar_table_init())
+ return -ENODEV;
+
+ return dmar_dev_scope_init();
+}
+#endif
int alloc_iommu(struct dmar_drhd_unit *drhd)
{
