Header file linux/pci_ids.h defines AMCC vendor id (0x10e8) macro named PCI_VENDOR_ID_AMCC. So use this macro instead of driver custom macro. Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> --- drivers/pci/controller/pci-xgene.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c index e64536047b65..56d0d50338c8 100644 --- a/drivers/pci/controller/pci-xgene.c +++ b/drivers/pci/controller/pci-xgene.c @@ -48,7 +48,6 @@ #define EN_COHERENCY 0xF0000000 #define EN_REG 0x00000001 #define OB_LO_IO 0x00000002 -#define XGENE_PCIE_VENDORID 0x10E8 #define XGENE_PCIE_DEVICEID 0xE004 #define SZ_1T (SZ_1G*1024ULL) #define PIPE_PHY_RATE_RD(src) ((0xc000 & (u32)(src)) >> 0xe) @@ -560,7 +559,7 @@ static int xgene_pcie_setup(struct xgene_pcie_port *port) xgene_pcie_clear_config(port); /* setup the vendor and device IDs correctly */ - val = (XGENE_PCIE_DEVICEID << 16) | XGENE_PCIE_VENDORID; + val = (XGENE_PCIE_DEVICEID << 16) | PCI_VENDOR_ID_AMCC; xgene_pcie_writel(port, BRIDGE_CFG_0, val); ret = xgene_pcie_map_ranges(port); -- 2.20.1
