Add device tree binding documentation for PCIe in MT7621 SoCs. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx> --- .../bindings/pci/mediatek,mt7621-pci.yaml | 142 ++++++++++++++++++ 1 file changed, 142 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml new file mode 100644 index 000000000000..d7359d0ee935 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7621 PCIe controller + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx> + +description: |+ + MediaTek MT7621 PCIe subsys supports single Root complex (RC) + with 3 Root Ports. Each Root Ports supports a Gen1 1-lane Link + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: mediatek,mt7621-pci + + reg: + items: + - description: host-pci bridge registers + - description: pcie port 0 RC control registers + - description: pcie port 1 RC control registers + - description: pcie port 2 RC control registers + + ranges: + maxItems: 2 + +patternProperties: + 'pcie@[0-2],0': + type: object + $ref: /schemas/pci/pci-bus.yaml# + + properties: + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + phys: + maxItems: 1 + + required: + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - resets + - clocks + - phys + - phy-names + - ranges + + unevaluatedProperties: false + +required: + - compatible + - reg + - ranges + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/mips-gic.h> + + pcie: pcie@1e140000 { + compatible = "mediatek,mt7621-pci"; + reg = <0x1e140000 0x100>, + <0x1e142000 0x100>, + <0x1e143000 0x100>, + <0x1e144000 0x100>; + + #address-cells = <3>; + #size-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + device_type = "pci"; + ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */ + <0x01000000 0 0x1e160000 0x1e160000 0 0x00010000>; /* io space */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xF800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstctrl 24>; + clocks = <&clkctrl 24>; + phys = <&pcie0_phy 1>; + phy-names = "pcie-phy0"; + ranges; + }; + + pcie@1,0 { + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstctrl 25>; + clocks = <&clkctrl 25>; + phys = <&pcie0_phy 1>; + phy-names = "pcie-phy1"; + ranges; + }; + + pcie@2,0 { + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstctrl 26>; + clocks = <&clkctrl 26>; + phys = <&pcie2_phy 0>; + phy-names = "pcie-phy2"; + ranges; + }; + }; +... -- 2.25.1
