On Wed, Aug 25, 2021 at 8:51 AM Barry Song <21cnbao@xxxxxxxxx> wrote: > > On Sat, Aug 21, 2021 at 10:42 PM Marc Zyngier <maz@xxxxxxxxxx> wrote: > > > > Hi Bjorn, > > > > On Sat, 21 Aug 2021 00:33:28 +0100, > > Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > > > > > > [+cc Thomas, Marc] > > > > > > On Sat, Aug 21, 2021 at 10:37:43AM +1200, Barry Song wrote: > > > > From: Barry Song <song.bao.hua@xxxxxxxxxxxxx> > > > > > > > > /sys/bus/pci/devices/.../irq sysfs ABI is very confusing at this > > > > moment especially for MSI-X cases. > > > > > > AFAICT this patch *only* affects MSI-X. So are you saying the sysfs > > > ABI is fine for MSI but confusing for MSI-X? > > > > > > > While MSI sets IRQ to the first > > > > number in the vector, MSI-X does nothing for this though it saves > > > > default_irq in msix_setup_entries(). Weird the saved default_irq > > > > for MSI-X is never used in pci_msix_shutdown(), which is quite > > > > different with pci_msi_shutdown(). Thus, this patch moves to show > > > > the first IRQ number which is from the first msi_entry for MSI-X. > > > > Hopefully, this can make IRQ ABI more clear and more consistent. > > > > > > > > Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > > > > Signed-off-by: Barry Song <song.bao.hua@xxxxxxxxxxxxx> > > > > --- > > > > drivers/pci/msi.c | 6 ++++++ > > > > 1 file changed, 6 insertions(+) > > > > > > > > diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c > > > > index 9232255..6bbf81b 100644 > > > > --- a/drivers/pci/msi.c > > > > +++ b/drivers/pci/msi.c > > > > @@ -771,6 +771,7 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries, > > > > int ret; > > > > u16 control; > > > > void __iomem *base; > > > > + struct msi_desc *desc; > > > > > > > > /* Ensure MSI-X is disabled while it is set up */ > > > > pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); > > > > @@ -814,6 +815,10 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries, > > > > pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0); > > > > > > > > pcibios_free_irq(dev); > > > > + > > > > + desc = first_pci_msi_entry(dev); > > > > + dev->irq = desc->irq; > > > > > > This change is not primarily about sysfs. This is about changing > > > "dev->irq" when MSI-X is enabled, and it's only incidental that sysfs > > > reflects that. > > > > > > So we need to know the effect of changing dev->irq. Drivers may use > > > the value of dev->irq, and I'm *guessing* this change shouldn't break > > > them since we already do this for MSI, but I'd like some more expert > > > opinion than mine :) > > > > > > For MSI we have: > > > > > > msi_capability_init > > > msi_setup_entry > > > entry = alloc_msi_entry(nvec) > > > entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */ > > > dev->irq = entry->irq; > > > > > > pci_msi_shutdown > > > /* Restore dev->irq to its default pin-assertion IRQ */ > > > dev->irq = desc->msi_attrib.default_irq; > > > > > > and for MSI-X we have: > > > > > > msix_capability_init > > > msix_setup_entries > > > for (i = 0; i < nvec; i++) > > > entry = alloc_msi_entry(1) > > > entry->msi_attrib.default_irq = dev->irq; > > > > > > pci_msix_shutdown > > > for_each_pci_msi_entry(entry, dev) > > > __pci_msix_desc_mask_irq > > > + dev->irq = entry->msi_attrib.default_irq; # added by this patch > > > > > > > > > Things that seem strange to me: > > > > > > - The msi_setup_entry() comment "Save IOAPIC IRQ" seems needlessly > > > specific; maybe it should be "INTx IRQ". > > > > > > - The pci_msi_shutdown() comment "Restore ... pin-assertion IRQ" > > > should match the msi_setup_entry() one, e.g., maybe it should also > > > be "INTx IRQ". There are no INTx or IOAPIC pins in PCIe. > > > > > > - The only use of .default_irq is to save and restore dev->irq, so > > > it looks like a per-device thing, not a per-vector thing. > > > > > > In msi_setup_entry() there's only one msi_entry, so there's only > > > one saved .default_irq. > > > > > > In msix_setup_entries(), we get nvecs msi_entry structs, and we > > > get a saved .default_irq in each one? > > > > That's a key point. > > > > Old-school PCI/MSI is represented by a single interrupt, and you > > *could* somehow make it relatively easy for drivers that only > > understand INTx to migrate to MSI if you replaced whatever is held in > > dev->irq (which should only represent the INTx mapping) with the MSI > > interrupt number. Which I guess is what the MSI code is doing. > > > > This is the 21st century, and nobody should ever rely on such horror, > > but I'm sure we do have such drivers in the tree. Boo. > > > > However, this *cannot* hold true for Multi-MSI, nor MSI-X, because > > there is a plurality of interrupts. Even worse, for MSI-X, there is > > zero guarantee that the allocated interrupts will be in a contiguous > > space. > > > > Given that, what is dev->irq good for? "Absolutely Nothing! (say it > > again!)". > > > > MSI-X is not something you can "accidentally" use. You have to > > actively embrace it. In all honesty, this patch tries to move in the > > wrong direction. If anything, we should kill this hack altogether and > > fix the (handful of?) drivers that rely on it. That'd actually be a > > good way to find whether they are still worth keeping in the tree. And > > if it breaks too many of them, then at least we'll know where we > > stand. > > > > I'd be tempted to leave the below patch simmer in -next for a few > > weeks and see if how many people shout: > > > > diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c > > index e5e75331b415..2be9a01cbe72 100644 > > --- a/drivers/pci/msi.c > > +++ b/drivers/pci/msi.c > > @@ -591,7 +591,6 @@ msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd) > > entry->msi_attrib.is_virtual = 0; > > entry->msi_attrib.entry_nr = 0; > > entry->msi_attrib.maskbit = !!(control & PCI_MSI_FLAGS_MASKBIT); > > - entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */ > > entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1; > > entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec)); > > > > @@ -682,7 +681,6 @@ static int msi_capability_init(struct pci_dev *dev, int nvec, > > dev->msi_enabled = 1; > > > > pcibios_free_irq(dev); > > - dev->irq = entry->irq; > > return 0; > > } > > > > @@ -742,7 +740,6 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base, > > entry->msi_attrib.is_virtual = > > entry->msi_attrib.entry_nr >= vec_count; > > > > - entry->msi_attrib.default_irq = dev->irq; > > entry->mask_base = base; > > > > addr = pci_msix_desc_addr(entry); > > @@ -964,8 +961,6 @@ static void pci_msi_shutdown(struct pci_dev *dev) > > mask = msi_mask(desc->msi_attrib.multi_cap); > > msi_mask_irq(desc, mask, 0); > > > > - /* Restore dev->irq to its default pin-assertion IRQ */ > > - dev->irq = desc->msi_attrib.default_irq; > > pcibios_alloc_irq(dev); > > } > > > > diff --git a/include/linux/msi.h b/include/linux/msi.h > > index e8bdcb83172b..a631664c1c38 100644 > > --- a/include/linux/msi.h > > +++ b/include/linux/msi.h > > @@ -114,7 +114,6 @@ struct ti_sci_inta_msi_desc { > > * @maskbit: [PCI MSI/X] Mask-Pending bit supported? > > * @is_64: [PCI MSI/X] Address size: 0=32bit 1=64bit > > * @entry_nr: [PCI MSI/X] Entry which is described by this descriptor > > - * @default_irq:[PCI MSI/X] The default pre-assigned non-MSI irq > > * @mask_pos: [PCI MSI] Mask register position > > * @mask_base: [PCI MSI-X] Mask register base address > > * @platform: [platform] Platform device specific msi descriptor data > > @@ -148,7 +147,6 @@ struct msi_desc { > > u8 is_64 : 1; > > u8 is_virtual : 1; > > u16 entry_nr; > > - unsigned default_irq; > > } msi_attrib; > > union { > > u8 mask_pos; > > > > We will also need the below change as pci_irq_vector() depends on > dev->irq for the MSI case. > > int pci_irq_vector(struct pci_dev *dev, unsigned int nr) > { > if (dev->msix_enabled) { > struct msi_desc *entry; > int i = 0; > > for_each_pci_msi_entry(entry, dev) { > if (i == nr) > return entry->irq; > i++; > } > WARN_ON_ONCE(1); > return -EINVAL; > } > > if (dev->msi_enabled) { > struct msi_desc *entry = first_pci_msi_entry(dev); > > if (WARN_ON_ONCE(nr >= entry->nvec_used)) > return -EINVAL; > > + return entry->irq + nr; > } else { > if (WARN_ON_ONCE(nr > 0)) > return -EINVAL; > } > > > - return dev->irq + nr; > + return dev->irq; > } > EXPORT_SYMBOL(pci_irq_vector); > And here: --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -401,7 +401,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev) if (!dev->msi_enabled) return; - entry = irq_get_msi_desc(dev->irq); + entry = first_pci_msi_entry(dev); pci_intx_for_msi(dev, 0); pci_msi_set_enable(dev, 0); since drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c is the only one calling pci_restore_msi_state(), will probably require one test from the driver maintainers. > > Thanks, > > > > M. > > > > -- > > Without deviation from the norm, progress is not possible. > Thanks barry