According to PCI 3.0 specification, sending both MSI and MSI-X interrupts is done by DWORD memory write operation to doorbell message address. The write operation for MSI has zero upper 16 bits and the MSI interrupt number in the lower 16 bits. The write operation for MSI-X contains a 32-bit value from MSI-X table. As driver supports and assigns only interrupt numbers from range 0..31, enable also MSI-X support. Testing proved that kernel can correctly receive MSI-X interrupts from PCIe cards which supports both MSI and MSI-X interrupts. Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> Reviewed-by: Marek Behún <kabel@xxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- drivers/pci/controller/pci-aardvark.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index 0e81d7f37465..2c944a04fba8 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -1200,7 +1200,7 @@ static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie) msi_di = &pcie->msi_domain_info; msi_di->flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | - MSI_FLAG_MULTI_PCI_MSI; + MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX; msi_di->chip = msi_ic; pcie->msi_inner_domain = -- 2.20.1
