[PATCH V7 1/5] PCI: loongson: Use correct pci config access operations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



LS2K/LS7A support 8/16/32-bits pci config access operations, so we can
safely use pci_generic_config_read()/pci_generic_config_write() instead
of pci_generic_config_read32()/pci_generic_config_write32().

Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxxx>
---
 drivers/pci/controller/pci-loongson.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
index 48169b1e3817..7140bdd04d35 100644
--- a/drivers/pci/controller/pci-loongson.c
+++ b/drivers/pci/controller/pci-loongson.c
@@ -159,8 +159,15 @@ static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return val;
 }
 
-/* H/w only accept 32-bit PCI operations */
+/* LS2K/LS7A accept 8/16/32-bit PCI operations */
 static struct pci_ops loongson_pci_ops = {
+	.map_bus = pci_loongson_map_bus,
+	.read	= pci_generic_config_read,
+	.write	= pci_generic_config_write,
+};
+
+/* RS780/SR5690 only accept 32-bit PCI operations */
+static struct pci_ops loongson_pci_ops32 = {
 	.map_bus = pci_loongson_map_bus,
 	.read	= pci_generic_config_read32,
 	.write	= pci_generic_config_write32,
@@ -218,8 +225,11 @@ static int loongson_pci_probe(struct platform_device *pdev)
 	}
 
 	bridge->sysdata = priv;
-	bridge->ops = &loongson_pci_ops;
 	bridge->map_irq = loongson_map_irq;
+	if (!of_device_is_compatible(node, "loongson,rs780e-pci"))
+		bridge->ops = &loongson_pci_ops;
+	else
+		bridge->ops = &loongson_pci_ops32;
 
 	return pci_host_probe(bridge);
 }
-- 
2.27.0




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux