Em Mon, 16 Aug 2021 14:01:06 -0500
Rob Herring <robh@xxxxxxxxxx> escreveu:
> On Mon, Aug 16, 2021 at 8:36 AM Mauro Carvalho Chehab
> <mchehab+huawei@xxxxxxxxxx> wrote:
> >
> > Em Mon, 16 Aug 2021 10:42:52 +0200
> > Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> escreveu:
> >
> > > Em Sat, 14 Aug 2021 12:32:56 -0500
> > > Rob Herring <robh@xxxxxxxxxx> escreveu:
> > >
> > > > On Fri, Aug 13, 2021 at 12:19 PM Mauro Carvalho Chehab
> > > > <mchehab+huawei@xxxxxxxxxx> wrote:
> > > > >
> > > > > Em Fri, 13 Aug 2021 11:02:57 -0500
> > > > > Rob Herring <robh@xxxxxxxxxx> escreveu:
> > > > >
> > > > > > When a DT contains PCI child bus nodes, lookup of the MSI domain on PCI
> > > > > > buses fails resulting in the following warnings:
> > > > > >
> > > > > > WARNING: CPU: 4 PID: 7 at include/linux/msi.h:256 __pci_enable_msi_range+0x398/0x59c
> > > > > >
> > > > > > The issue is that pci_host_bridge_of_msi_domain() will check the DT node of
> > > > > > the passed in bus even if it's not the host bridge's bus. Based on the
> > > > > > name of the function, that's clearly not what we want. Fix this by
> > > > > > walking the bus parents to the root bus.
> > > > > >
> > > > > > Reported-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> > > > > > Cc: Marc Zyngier <maz@xxxxxxxxxx>
> > > > > > Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > > > > > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> > > > > > Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> > > > > > ---
> > > > > > Compile tested only. Mauro, Can you see if this fixes your issue.
> > > > > >
> > > > > > drivers/pci/of.c | 4 ++++
> > > > > > 1 file changed, 4 insertions(+)
> > > > > >
> > > > > > diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> > > > > > index a143b02b2dcd..ea70aede054c 100644
> > > > > > --- a/drivers/pci/of.c
> > > > > > +++ b/drivers/pci/of.c
> > > > > > @@ -84,6 +84,10 @@ struct irq_domain *pci_host_bridge_of_msi_domain(struct pci_bus *bus)
> > > > > > if (!bus->dev.of_node)
> > > > > > return NULL;
> > > > > >
> > > > > > + /* Find the host bridge bus */
> > > > > > + while (!pci_is_root_bus(bus))
> > > > > > + bus = bus->parent;
> > > > > > +
> > > > > > /* Start looking for a phandle to an MSI controller. */
> > > > > > d = of_msi_get_domain(&bus->dev, bus->dev.of_node, DOMAIN_BUS_PCI_MSI);
> > > > > > if (d)
> > > > >
> > > > > Nope, it didn't solve the issue.
> > > >
> > > > Can you try adding some prints of the domain, pci dev, and DT node to
> > > > pci_set_bus_msi_domain(). Comparing those when having child nodes or
> > > > not would be helpful.
> > >
> > > Debug patch enclosed.
> > >
> > > This is what happens when msi-parent is at /soc/pcie@f4000000/pcie@0,0:
> > >
> > > [ 4.305247] pci_bus 0000:01: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0: IRQ domain: ffff000104a2f6c0
> > > [ 4.442212] pci_bus 0000:02: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0: IRQ domain: ffff000104a2f6c0
> > > [ 4.688145] pci_bus 0000:03: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0/pcie@1,0: IRQ domain: ffff000104a2f6c0
> > > [ 4.800613] pci_bus 0000:04: pci_set_bus_msi_domain: of_node (null): IRQ domain: ffff000104a2f6c0
> > > [ 4.856254] pci_bus 0000:05: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0/pcie@5,0: IRQ domain: ffff000104a2f6c0
> > > [ 4.922117] pci_bus 0000:06: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0/pcie@7,0: IRQ domain: ffff000104a2f6c0
> > > [ 5.032708] pci_bus 0000:07: pci_set_bus_msi_domain: of_node (null): IRQ domain: ffff000104a2f6c0
> > >
> > > And this is what happens when msi-parent is at /soc/pcie@f4000000
> > > (either with or without your patch applied):
> > >
> > > [ 4.120328] pci_bus 0000:01: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.214541] pci_bus 0000:02: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.226054] pci_bus 0000:01: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.478858] pci_bus 0000:03: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0/pcie@1,0: IRQ domain: 0000000000000000
> > > [ 4.491218] pci_bus 0000:02: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.502793] pci_bus 0000:01: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.588196] pci_bus 0000:04: pci_set_bus_msi_domain: of_node (null): IRQ domain: 0000000000000000
> > > [ 4.597161] pci_bus 0000:02: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.608747] pci_bus 0000:01: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.658892] pci_bus 0000:05: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0/pcie@5,0: IRQ domain: 0000000000000000
> > > [ 4.671241] pci_bus 0000:02: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.682869] pci_bus 0000:01: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.732938] pci_bus 0000:06: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0/pcie@7,0: IRQ domain: 0000000000000000
> > > [ 4.745305] pci_bus 0000:02: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.756880] pci_bus 0000:01: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.850363] pci_bus 0000:07: pci_set_bus_msi_domain: of_node (null): IRQ domain: 0000000000000000
> > > [ 4.859322] pci_bus 0000:02: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0/pcie@0,0: IRQ domain: 0000000000000000
> > > [ 4.870895] pci_bus 0000:01: pci_set_bus_msi_domain: of_node /soc/pcie@f4000000/pcie@0,0: IRQ domain: 0000000000000000
> > >
> > > Btw, despite lspci works on both cases, the Ethernet adapter stops
> > > working when msi-parent is at /soc/pcie@f4000000. I didn't notice it
> > > before, as (up to last week) I was using WiFi to connect to this board.
> > >
> > > Thanks,
> > > Mauro
> > >
> > > [PATCH] PCI: probe: Add a debug printk at pci_set_bus_msi_domain
> > >
> > > That helps to discover problems when trying to get the MSI IRQ
> > > domain.
> > >
> > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> > >
> > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > > index c5dfc1afb1d3..f73bd81922b3 100644
> > > --- a/drivers/pci/probe.c
> > > +++ b/drivers/pci/probe.c
> > > @@ -866,6 +866,8 @@ static void pci_set_bus_msi_domain(struct pci_bus *bus)
> > > for (b = bus, d = NULL; !d && !pci_is_root_bus(b); b = b->parent) {
> > > if (b->self)
> > > d = dev_get_msi_domain(&b->self->dev);
> > > + dev_dbg(&b->dev, "%s: of_node %pOF: IRQ domain: %px\n",
> > > + __func__, b->dev.of_node, d);
> > > }
> > >
> > > if (!d)
> > >
> >
> > I added a lot of other debug stuff (see attached).
> >
> > When msi-parent is at:
> >
> > pcie@f4000000 {
> > msi-parent = <&its_pcie>;
> > };
>
> Are you sure the IRQ domain got created for its_pcie? From your dts
> changes, you have a GICv3-ITS without a GICv3. I don't think that's
> right.
>
> The DWC driver will skip setting up it's own MSI controller if
> 'msi-parent' is present in the DWC node. So if you move it out of that
> node, then the DWC MSI controller will be found and used. Try removing
> 'msi-parent' and the its_pcie node.
You're right, thanks!
The enclosed diff is enough for it to cleanup the PCIe logs, while keeping
the hardware working.
I'll append it to the DTS patch and re-send you the updated DT schema
patches.
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 89d3b07456c3..98972938390d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -666,12 +666,6 @@ gpio28: gpio@fff1d000 {
clock-names = "apb_pclk";
};
- its_pcie: interrupt-controller@f5100000 {
- reg = <0x0 0xf5100000 0x0 0x100000>;
- compatible = "arm,gic-v3-its";
- msi-controller;
- };
-
pcie_phy: pcie-phy@fc000000 {
compatible = "hisilicon,hi970-pcie-phy";
reg = <0x0 0xfc000000 0x0 0x80000>;
@@ -731,7 +725,6 @@ pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0
#address-cells = <3>;
#size-cells = <2>;
ranges;
- msi-parent = <&its_pcie>;
pcie@0,0 { // Lane 0: upstream
reg = <0 0 0 0 0>;
Thanks,
Mauro
