The PFTF CM4 is an ACPI platform that is following the PCIe SMCCC
standard because its PCIe config space isn't ECAM compliant and is
split into two parts. One part for the root port registers and a
moveable window which points at a given device's 4K config space.
Thus it doesn't have a MCFG (and really any MCFG provided would be
nonsense anyway). As Linux doesn't support the PCIe SMCCC standard
we key off a Linux specific host bridge _DSD to add custom ECAM
ops and cfgres. The cfg op selects between those two regions, as
well as disallowing problematic accesses, particularly if the link
is down because there isn't an attached device.
Signed-off-by: Jeremy Linton <jeremy.linton@xxxxxxx>
---
drivers/pci/controller/Makefile | 1 +
drivers/pci/controller/pcie-brcmstb-acpi.c | 77 ++++++++++++++++++++++
include/linux/pci-ecam.h | 1 +
3 files changed, 79 insertions(+)
create mode 100644 drivers/pci/controller/pcie-brcmstb-acpi.c
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index aaf30b3dcc14..65aa6fd3ed89 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -57,5 +57,6 @@ ifdef CONFIG_PCI_QUIRKS
obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
obj-$(CONFIG_ARM64) += pci-thunder-pem.o
obj-$(CONFIG_ARM64) += pci-xgene.o
+obj-$(CONFIG_ARM64) += pcie-brcmstb-acpi.o
endif
endif
diff --git a/drivers/pci/controller/pcie-brcmstb-acpi.c b/drivers/pci/controller/pcie-brcmstb-acpi.c
new file mode 100644
index 000000000000..76944876155f
--- /dev/null
+++ b/drivers/pci/controller/pcie-brcmstb-acpi.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ACPI quirks for Brcm2711 PCIe host controller
+ * As used on the Raspberry Pi Compute Module 4
+ *
+ * Copyright (C) 2021 Arm Ltd.
+ */
+
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
+#include "../pci.h"
+#include "pcie-brcmstb.h"
+
+static int brcm_acpi_init(struct pci_config_window *cfg)
+{
+ /*
+ * This platform doesn't technically have anything that could be called
+ * ECAM. Its config region has root port specific registers between
+ * standard PCIe defined config registers. Thus the region setup by the
+ * generic ECAM code needs to be adjusted. The HW can access bus 0-ff
+ * but the footprint isn't a nice power of 2 (40k). For purposes of
+ * mapping the config region we are just going to squash the standard
+ * and nonstandard registers together rather than mapping them
+ * separately. This code simply honors the quirk provided base+size
+ * instead.
+ */
+ iounmap(cfg->win);
+ cfg->win = pci_remap_cfgspace(cfg->res.start, resource_size(&cfg->res));
+ if (!cfg->win)
+ goto err_exit;
+
+ /* MSI is nonstandard as well */
+ pci_no_msi();
+
+ return 0;
+err_exit:
+ dev_err(cfg->parent, "PCI: Failed to remap config\n");
+ return -ENOMEM;
+}
+
+static void __iomem *brcm_pcie_map_conf2(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ void __iomem *base = cfg->win;
+ int idx;
+ u32 up;
+
+ /* Accesses to the RC go right to the RC registers if slot==0 */
+ if (pci_is_root_bus(bus))
+ return PCI_SLOT(devfn) ? NULL : base + where;
+
+ /* Assure link up before sending request */
+ up = readl(base + PCIE_MISC_PCIE_STATUS);
+ if (!(up & PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK))
+ return NULL;
+
+ if (!(up & PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK))
+ return NULL;
+
+ /* For devices, write to the config space index register */
+ idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
+ writel(idx, base + PCIE_EXT_CFG_INDEX);
+ return base + PCIE_EXT_CFG_DATA + where;
+}
+
+const struct pci_ecam_ops bcm2711_pcie_ops = {
+ .init = brcm_acpi_init,
+ .bus_shift = 1,
+ .pci_ops = {
+ .map_bus = brcm_pcie_map_conf2,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+ }
+};
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index adea5a4771cf..a5de0285bb7f 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -87,6 +87,7 @@ extern const struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 *
extern const struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
extern const struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */
extern const struct pci_ecam_ops tegra194_pcie_ops; /* Tegra194 PCIe */
+extern const struct pci_ecam_ops bcm2711_pcie_ops; /* Bcm2711 PCIe */
#endif
#if IS_ENABLED(CONFIG_PCI_HOST_COMMON)
--
2.31.1
