On 2021/8/5 7:29, Bjorn Helgaas wrote:
On Wed, Aug 04, 2021 at 09:47:04PM +0800, Dongdong Liu wrote:
Enable VF 10-Bit Tag Requester when it's upstream component support
10-bit Tag Completer.
s/it's/its/
s/support/supports/
Will fix.
I think "upstream component" here means the PF, doesn't it? I don't
think the PF is really an *upstream* component; there's no routing
like with a switch.
I want to say the switch and root port devices that support 10-Bit
Tag Completer. Sure, VF also needs to have 10-bit Tag Requester
Supported capability.
Signed-off-by: Dongdong Liu <liudongdong3@xxxxxxxxxx>
Reviewed-by: Christoph Hellwig <hch@xxxxxx>
---
drivers/pci/iov.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index dafdc65..0d0bed1 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -634,6 +634,10 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
pci_iov_set_numvfs(dev, nr_virtfn);
iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
+ if ((iov->cap & PCI_SRIOV_CAP_VF_10BIT_TAG_REQ) &&
+ dev->ext_10bit_tag)
+ iov->ctrl |= PCI_SRIOV_CTRL_VF_10BIT_TAG_REQ_EN;
+
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
msleep(100);
@@ -650,6 +654,8 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
err_pcibios:
iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
+ if (iov->ctrl & PCI_SRIOV_CTRL_VF_10BIT_TAG_REQ_EN)
+ iov->ctrl &= ~PCI_SRIOV_CTRL_VF_10BIT_TAG_REQ_EN;
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
ssleep(1);
@@ -682,6 +688,8 @@ static void sriov_disable(struct pci_dev *dev)
sriov_del_vfs(dev);
iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
+ if (iov->ctrl & PCI_SRIOV_CTRL_VF_10BIT_TAG_REQ_EN)
+ iov->ctrl &= ~PCI_SRIOV_CTRL_VF_10BIT_TAG_REQ_EN;
You can just clear PCI_SRIOV_CTRL_VF_10BIT_TAG_REQ_EN unconditionally,
can't you? I know it wouldn't change anything, but removing the "if"
makes the code prettier. You could just add it in the existing
PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE mask.
Will do.
Thanks,
Dongdong
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
ssleep(1);
--
2.7.4
.