On 7/29/2021 15:39, Bjorn Helgaas wrote:
On Wed, Jul 21, 2021 at 10:58:58PM -0400, Alex Deucher wrote:
From: Marcin Bachry <hegel666@xxxxxxxxx>
Renoir needs a similar delay.
[Alex: I talked to the AMD USB hardware team and the
AMD windows team and they are not aware of any HW
errata or specific issues. The HW works fine in
windows. I was told windows uses a rather generous
default delay of 100ms for PCI state transitions.]
Signed-off-by: Marcin Bachry <hegel666@xxxxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Added stable tag and applied to pci/pm for v5.15, thanks!
Thanks Bjorn!
Given how small/harmless this is and 5.14 isn't cut yet, any chance this
could still make one of the -rcX rather than wait for 5.14.1 instead?
Cc: mario.limonciello@xxxxxxx
Cc: prike.liang@xxxxxxx
Cc: shyam-sundar.s-k@xxxxxxx
---
Bjorn,
With the above comment in mind, would you consider this patch
or would you prefer to increase the default timeout on Linux?
100ms seems a bit long and most devices seems to work within
that limit. Additionally, this patch doesn't seem to be
required on all AMD platforms with the affected USB controller,
so I suspect the current timeout on Linux is probably about
right. Increasing it seems to fix some of the marginal cases.
Alex
drivers/pci/quirks.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 22b2bb1109c9..dea10d62d5b9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1899,6 +1899,7 @@ static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1639, quirk_ryzen_xhci_d3hot);
#ifdef CONFIG_X86_IO_APIC
static int dmi_disable_ioapicreroute(const struct dmi_system_id *d)
--
2.31.1
