This should ease finding similarities with different platforms,
with the intention of solving problems once in a generic framework
which everyone can use.
Note: to move intel-iommu.c, the declaration of pci_find_upstream_pcie_bridge()
has to move from drivers/pci/pci.h to include/linux/pci.h. This is handled
in this patch, too.
Compile-tested on x86_64.
Signed-off-by: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
---
arch/x86/Kconfig | 11 -----------
drivers/iommu/Kconfig | 11 +++++++++++
drivers/iommu/Makefile | 1 +
drivers/{pci => iommu}/intel-iommu.c | 1 -
drivers/pci/Makefile | 2 +-
drivers/pci/pci.h | 2 --
include/linux/pci.h | 11 +++++++++++
7 files changed, 24 insertions(+), 15 deletions(-)
rename drivers/{pci => iommu}/intel-iommu.c (99%)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1b6a2e2..d22662c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1912,17 +1912,6 @@ config PCI_CNB20LE_QUIRK
You should say N unless you know you need this.
-config DMAR
- bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
- depends on PCI_MSI && ACPI && EXPERIMENTAL
- select IOMMU_API
- help
- DMA remapping (DMAR) devices support enables independent address
- translations for Direct Memory Access (DMA) from devices.
- These DMA remapping devices are reported via ACPI tables
- and include PCI device scope covered by these DMA
- remapping devices.
-
config DMAR_DEFAULT_ON
def_bool y
prompt "Enable DMA Remapping Devices by default"
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 555f5a8..b03a980 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -40,3 +40,14 @@ config AMD_IOMMU_STATS
statistics about whats happening in the driver and exports that
information to userspace via debugfs.
If unsure, say N.
+
+config DMAR
+ bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
+ depends on PCI_MSI && ACPI && EXPERIMENTAL
+ select IOMMU_API
+ help
+ DMA remapping (DMAR) devices support enables independent address
+ translations for Direct Memory Access (DMA) from devices.
+ These DMA remapping devices are reported via ACPI tables
+ and include PCI device scope covered by these DMA
+ remapping devices.
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index d099d39..aaac56d 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_IOMMU_API) += iommu.o
obj-$(CONFIG_MSM_IOMMU) += msm-iommu.o
obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o
+obj-$(CONFIG_DMAR) += intel-iommu.o
diff --git a/drivers/pci/intel-iommu.c b/drivers/iommu/intel-iommu.c
similarity index 99%
rename from drivers/pci/intel-iommu.c
rename to drivers/iommu/intel-iommu.c
index 59f17ac..fd7a055 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -42,7 +42,6 @@
#include <linux/pci-ats.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
-#include "pci.h"
#define ROOT_SIZE VTD_PAGE_SIZE
#define CONTEXT_SIZE VTD_PAGE_SIZE
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index c85f744..7826920 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -30,7 +30,7 @@ obj-$(CONFIG_PCI_MSI) += msi.o
obj-$(CONFIG_HT_IRQ) += htirq.o
# Build Intel IOMMU support
-obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o
+obj-$(CONFIG_DMAR) += dmar.o iova.o
obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 731e202..b7bf11d 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -184,8 +184,6 @@ pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev)
return NULL;
}
-struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
-
/* PCI slot sysfs helper code */
#define to_pci_slot(s) container_of(s, struct pci_slot, kobj)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c446b5c..970bfe0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1589,5 +1589,16 @@ int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt);
int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
unsigned int len, const char *kw);
+/**
+ * pci_find_upstream_pcie_bridge - find upstream PCIe-to-PCI bridge of a device
+ * @pdev: the PCI device
+ *
+ * if the device is PCIE, return NULL
+ * if the device isn't connected to a PCIe bridge (that is its parent is a
+ * legacy PCI bridge and the bridge is directly connected to bus 0), return its
+ * parent
+ */
+struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
+
#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
