[PATCH 2/3] PCI: qcom: Split init and enable for 1.9.0 and 2.7.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On the sc8180x platform the "msi" interrupt often fires before init has
a chance to enable the clocks that are necessary for the interrupt
handler to access the hardware.

Split out the resource enablement and disablement into the newly
introduce enable/disable resource operations, to ensure that the
necessary resources are enabled when needed.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 31 +++++++++++++++++---------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 8a64a126de2b..8adcbb718832 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1173,12 +1173,11 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	return PTR_ERR_OR_ZERO(res->pipe_clk);
 }
 
-static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
+static int qcom_pcie_enable_2_7_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
-	u32 val;
 	int ret;
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
@@ -1211,6 +1210,20 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 		goto err_disable_clocks;
 	}
 
+	return 0;
+
+err_disable_clocks:
+	clk_bulk_disable_unprepare(res->num_clks, res->clks);
+err_disable_regulators:
+	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
+
+	return ret;
+}
+
+static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
+{
+	u32 val;
+
 	/* configure PCIe to RC mode */
 	writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE);
 
@@ -1238,15 +1251,9 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 	}
 
 	return 0;
-err_disable_clocks:
-	clk_bulk_disable_unprepare(res->num_clks, res->clks);
-err_disable_regulators:
-	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-
-	return ret;
 }
 
-static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
+static void qcom_pcie_disable_2_7_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
 
@@ -1465,8 +1472,9 @@ static const struct qcom_pcie_ops ops_2_3_3 = {
 /* Qcom IP rev.: 2.7.0	Synopsys IP rev.: 4.30a */
 static const struct qcom_pcie_ops ops_2_7_0 = {
 	.get_resources = qcom_pcie_get_resources_2_7_0,
+	.enable_resources = qcom_pcie_enable_2_7_0,
 	.init = qcom_pcie_init_2_7_0,
-	.deinit = qcom_pcie_deinit_2_7_0,
+	.disable_resources = qcom_pcie_disable_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.post_init = qcom_pcie_post_init_2_7_0,
 	.post_deinit = qcom_pcie_post_deinit_2_7_0,
@@ -1475,8 +1483,9 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
 /* Qcom IP rev.: 1.9.0 */
 static const struct qcom_pcie_ops ops_1_9_0 = {
 	.get_resources = qcom_pcie_get_resources_2_7_0,
+	.enable_resources = qcom_pcie_enable_2_7_0,
 	.init = qcom_pcie_init_2_7_0,
-	.deinit = qcom_pcie_deinit_2_7_0,
+	.disable_resources = qcom_pcie_disable_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.post_init = qcom_pcie_post_init_2_7_0,
 	.post_deinit = qcom_pcie_post_deinit_2_7_0,
-- 
2.29.2




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux