On Tue, Jul 20, 2021 at 01:50:08PM -0700, Nirmal Patel wrote:
> During VT-d passthrough repetitive reboot tests, it was determined that the VMD
> domain needed to be reset in order to allow downstream devices to reinitialize
> properly. This is done using a secondary bus reset at each of the VMD root
> ports and any bridges in the domain.
I don't understand the "any bridges in the domain" part. Clearly you
only reset Intel bridges, and only those on a single "bus". So can
there be both VMD root ports and another kind of bridge on the same
bus?
Rewrap this to fit in 75 columns or so, so it doesn't overflow 80
column lines when git log indents it by 4.
> Signed-off-by: Nirmal Patel <nirmal.patel@xxxxxxxxxxxxxxx>
> Reviewed-by: Jon Derrick <jonathan.derrick@xxxxxxxxx>
> ---
> drivers/pci/controller/vmd.c | 46 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
> index e3fcdfec58b3..6e1c60048774 100644
> --- a/drivers/pci/controller/vmd.c
> +++ b/drivers/pci/controller/vmd.c
> @@ -15,6 +15,7 @@
> #include <linux/srcu.h>
> #include <linux/rculist.h>
> #include <linux/rcupdate.h>
> +#include <linux/delay.h>
>
> #include <asm/irqdomain.h>
> #include <asm/device.h>
> @@ -447,6 +448,49 @@ static struct pci_ops vmd_ops = {
> .write = vmd_pci_write,
> };
>
> +#define PCI_HEADER_TYPE_MASK 0x7f
Already defined in include/uapi/linux/pci_regs.h.
> +#define PCI_CLASS_BRIDGE_PCI 0x0604
Already defined in include/linux/pci_ids.h. What am I missing? Seems
like you should see duplicate definition warnings.
> +#define DEVICE_SPACE (8 * 4096)
> +#define VMD_DEVICE_BASE(vmd, device) ((vmd)->cfgbar + (device) * DEVICE_SPACE)
> +#define VMD_FUNCTION_BASE(vmd, device, fn) ((vmd)->cfgbar + (device) * (DEVICE_SPACE + (fn*4096)))
Add blank line here.
> +static void vmd_domain_sbr(struct vmd_dev *vmd)
> +{
> + char __iomem *base;
> + u16 ctl;
> + int dev_seq;
> + int max_devs = resource_size(&vmd->resources[0]) * 32;
> +
> + /*
> + * Subdevice config space may or many not be mapped linearly using 4k config
> + * space.
Fix comment indentation.
s/many/may/
I don't really understand the comment anyway. Is the point that
subdevice config space may not be physically contiguous? Certainly
VMD_DEVICE_BASE() computes virtual addresses that are linear.
> + */
> + for (dev_seq = 0; dev_seq < max_devs; dev_seq++) {
> + base = VMD_DEVICE_BASE(vmd, dev_seq);
> + if (readw(base + PCI_VENDOR_ID) != PCI_VENDOR_ID_INTEL)
> + continue;
> +
> + if ((readb(base + PCI_HEADER_TYPE) & PCI_HEADER_TYPE_MASK) !=
> + PCI_HEADER_TYPE_BRIDGE)
> + continue;
> +
> + if (readw(base + PCI_CLASS_DEVICE) != PCI_CLASS_BRIDGE_PCI)
> + continue;
> +
> + /* pci_reset_secondary_bus() */
> + ctl = readw(base + PCI_BRIDGE_CONTROL);
> + ctl |= PCI_BRIDGE_CTL_BUS_RESET;
> + writew(ctl, base + PCI_BRIDGE_CONTROL);
> + readw(base + PCI_BRIDGE_CONTROL);
> + msleep(2);
It's a shame we can't do this with pci_reset_secondary_bus(). Makes
me wonder if there's an opportunity for special pci_ops.
> + ctl &= ~PCI_BRIDGE_CTL_BUS_RESET;
> + writew(ctl, base + PCI_BRIDGE_CONTROL);
> + readw(base + PCI_BRIDGE_CONTROL);
> +
> + }
> + ssleep(1);
> +}
> +
> static void vmd_attach_resources(struct vmd_dev *vmd)
> {
> vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
> @@ -747,6 +791,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
> if (vmd->irq_domain)
> dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
>
> + vmd_domain_sbr(vmd);
> +
> pci_scan_child_bus(vmd->bus);
> pci_assign_unassigned_bus_resources(vmd->bus);
>
> --
> 2.27.0
>
