Loongson PCH (LS7A chipset) will be used by both MIPS-based and LoongArch-based Loongson processors. MIPS-based Loongson uses FDT but LoongArch-base Loongson uses ACPI, but the driver in drivers/ pci/controller/pci-loongson.c is FDT-only. So move the quirks to quirks.c where can be shared by all architectures. LoongArch is a new RISC ISA, mainline support will come soon, and documentations are here (in translation): https://github.com/loongson/LoongArch-Documentation Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxxx> --- drivers/pci/controller/pci-loongson.c | 69 --------------------------- drivers/pci/quirks.c | 69 +++++++++++++++++++++++++++ 2 files changed, 69 insertions(+), 69 deletions(-) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 48169b1e3817..88066e9db69e 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -12,15 +12,6 @@ #include "../pci.h" -/* Device IDs */ -#define DEV_PCIE_PORT_0 0x7a09 -#define DEV_PCIE_PORT_1 0x7a19 -#define DEV_PCIE_PORT_2 0x7a29 - -#define DEV_LS2K_APB 0x7a02 -#define DEV_LS7A_CONF 0x7a10 -#define DEV_LS7A_LPC 0x7a0c - #define FLAG_CFG0 BIT(0) #define FLAG_CFG1 BIT(1) #define FLAG_DEV_FIX BIT(2) @@ -32,66 +23,6 @@ struct loongson_pci { u32 flags; }; -/* Fixup wrong class code in PCIe bridges */ -static void bridge_class_quirk(struct pci_dev *dev) -{ - dev->class = PCI_CLASS_BRIDGE_PCI << 8; -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_0, bridge_class_quirk); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_1, bridge_class_quirk); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_2, bridge_class_quirk); - -static void system_bus_quirk(struct pci_dev *pdev) -{ - /* - * The address space consumed by these devices is outside the - * resources of the host bridge. - */ - pdev->mmio_always_on = 1; - pdev->non_compliant_bars = 1; -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_LS2K_APB, system_bus_quirk); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_LS7A_CONF, system_bus_quirk); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_LS7A_LPC, system_bus_quirk); - -static void loongson_mrrs_quirk(struct pci_dev *dev) -{ - struct pci_bus *bus = dev->bus; - struct pci_dev *bridge; - static const struct pci_device_id bridge_devids[] = { - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, - { 0, }, - }; - - /* look for the matching bridge */ - while (!pci_is_root_bus(bus)) { - bridge = bus->self; - bus = bus->parent; - /* - * Some Loongson PCIe ports have a h/w limitation of - * 256 bytes maximum read request size. They can't handle - * anything larger than this. So force this limit on - * any devices attached under these ports. - */ - if (pci_match_id(bridge_devids, bridge)) { - if (pcie_get_readrq(dev) > 256) { - pci_info(dev, "limiting MRRS to 256\n"); - pcie_set_readrq(dev, 256); - } - break; - } - } -} -DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); - static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, unsigned int devfn, int where) { diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 22b2bb1109c9..dee4798a49fc 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -205,6 +205,75 @@ static void quirk_mmio_always_on(struct pci_dev *dev) DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); +/* Loongson-related quirks */ +#define DEV_PCIE_PORT_0 0x7a09 +#define DEV_PCIE_PORT_1 0x7a19 +#define DEV_PCIE_PORT_2 0x7a29 + +#define DEV_LS2K_APB 0x7a02 +#define DEV_LS7A_CONF 0x7a10 +#define DEV_LS7A_LPC 0x7a0c + +/* Fixup wrong class code in PCIe bridges */ +static void loongson_bridge_class_quirk(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI << 8; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, loongson_bridge_class_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, loongson_bridge_class_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, loongson_bridge_class_quirk); + +static void loongson_system_bus_quirk(struct pci_dev *pdev) +{ + /* + * The address space consumed by these devices is outside the + * resources of the host bridge. + */ + pdev->mmio_always_on = 1; + pdev->non_compliant_bars = 1; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS2K_APB, loongson_system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_CONF, loongson_system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_LPC, loongson_system_bus_quirk); + +static void loongson_mrrs_quirk(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + struct pci_dev *bridge; + static const struct pci_device_id bridge_devids[] = { + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, + { 0, }, + }; + + /* look for the matching bridge */ + while (!pci_is_root_bus(bus)) { + bridge = bus->self; + bus = bus->parent; + /* + * Some Loongson PCIe ports have a h/w limitation of + * 256 bytes maximum read request size. They can't handle + * anything larger than this. So force this limit on + * any devices attached under these ports. + */ + if (pci_match_id(bridge_devids, bridge)) { + if (pcie_get_readrq(dev) > 256) { + pci_info(dev, "limiting MRRS to 256\n"); + pcie_set_readrq(dev, 256); + } + break; + } + } +} +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); + /* * The Mellanox Tavor device gives false positive parity errors. Disable * parity error reporting. -- 2.27.0
