If an error occurs after a successful 'cdns_pcie_init_phy()' call, it must
be undone by a 'cdns_pcie_disable_phy()' call, as already done above and
below.
Update the 'goto' to branch at the correct place of the error handling
path.
Fixes: 49e0efdce791 ("PCI: j721e: Add support to provide refclk to PCIe connector")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
drivers/pci/controller/cadence/pci-j721e.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 35e61048e133..8933db6ab1af 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -424,7 +424,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
ret = clk_prepare_enable(clk);
if (ret) {
dev_err(dev, "failed to enable pcie_refclk\n");
- goto err_get_sync;
+ goto err_pcie_setup;
}
pcie->refclk = clk;
--
2.30.2
