On Friday 25 June 2021 12:04:29 Lorenzo Pieralisi wrote:
> On Thu, Jun 24, 2021 at 11:33:44PM +0200, Pali Rohár wrote:
>
> [...]
>
> > -static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
> > +static int advk_pcie_check_pio_status(struct advk_pcie *pcie, u32 *val)
> > {
> > struct device *dev = &pcie->pdev->dev;
> > u32 reg;
> > @@ -472,15 +476,50 @@ static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
> > status = (reg & PIO_COMPLETION_STATUS_MASK) >>
> > PIO_COMPLETION_STATUS_SHIFT;
> >
> > - if (!status)
> > - return;
> > -
> > + /*
> > + * According to HW spec, the PIO status check sequence as below:
> > + * 1) even if COMPLETION_STATUS(bit9:7) indicates successful,
> > + * it still needs to check Error Status(bit11), only when this bit
> > + * indicates no error happen, the operation is successful.
> > + * 2) value Unsupported Request(1) of COMPLETION_STATUS(bit9:7) only
> > + * means a PIO write error, and for PIO read it is successful with
> > + * a read value of 0xFFFFFFFF.
> > + * 3) value Completion Retry Status(CRS) of COMPLETION_STATUS(bit9:7)
> > + * only means a PIO write error, and for PIO read it is successful
> > + * with a read value of 0xFFFF0001.
> > + * 4) value Completer Abort (CA) of COMPLETION_STATUS(bit9:7) means
> > + * error for both PIO read and PIO write operation.
> > + * 5) other errors are indicated as 'unknown'.
> > + */
> > switch (status) {
> > + case PIO_COMPLETION_STATUS_OK:
> > + if (reg & PIO_ERR_STATUS) {
> > + strcomp_status = "COMP_ERR";
> > + break;
> > + }
> > + /* Get the read result */
> > + if (val)
> > + *val = advk_readl(pcie, PIO_RD_DATA);
> > + /* No error */
> > + strcomp_status = NULL;
> > + break;
> > case PIO_COMPLETION_STATUS_UR:
> > - strcomp_status = "UR";
> > + if (val) {
> > + /* For reading, UR is not an error status */
> > + *val = CFG_RD_UR_VAL;
> > + strcomp_status = NULL;
> > + } else {
> > + strcomp_status = "UR";
> > + }
> > break;
> > case PIO_COMPLETION_STATUS_CRS:
> > - strcomp_status = "CRS";
> > + if (val) {
> > + /* For reading, CRS is not an error status */
> > + *val = CFG_RD_CRS_VAL;
>
> Need Bjorn's input on this.
Ok.
> I don't think this is what is expected from
> from a root complex according to the PCI specifications (depending on
> whether CSR software visibility is supported or not).
This patch / logic was written and reviewed by Marvell people as is
mentioned in commit description. But I was not able to get any feedback
from them about aardvark, so I have not put them into recipients of this
patch...
> Here we are fabricating a CRS completion value for all PCI config read
> transactions that are hitting a CRS completion status (and that's not
> the expected behaviour according to the PCI specifications and I don't
> think that's correct).
I see what what you mean. I think that for PCI_VENDOR_ID read request it
is correct. But question is what we should return for other read
requests.
> > + strcomp_status = NULL;
> > + } else {
> > + strcomp_status = "CRS";
> > + }
> > break;
> > case PIO_COMPLETION_STATUS_CA:
> > strcomp_status = "CA";
> > @@ -490,6 +529,9 @@ static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
> > break;
> > }
> >
> > + if (!strcomp_status)
> > + return 0;
> > +
> > if (reg & PIO_NON_POSTED_REQ)
> > str_posted = "Non-posted";
> > else
> > @@ -497,6 +539,8 @@ static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
> >
> > dev_err(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
> > str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
> > +
> > + return -EFAULT;
> > }
> >
> > static int advk_pcie_wait_pio(struct advk_pcie *pcie)
> > @@ -703,8 +747,17 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
> > size, val);
> >
> > if (advk_pcie_pio_is_running(pcie)) {
> > - *val = 0xffffffff;
> > - return PCIBIOS_SET_FAILED;
> > + /*
> > + * For PCI_VENDOR_ID register, return Completion Retry Status
> > + * so caller tries to issue the request again insted of failing
> > + */
> > + if (where == PCI_VENDOR_ID) {
> > + *val = CFG_RD_CRS_VAL;
> > + return PCIBIOS_SUCCESSFUL;
>
> Mmmm..here we are faking a CRS completion value to coerce the kernel
> into believing a CRS completion was received (which is not necessarily
> true) ?
This part of patch was written by me. I chose to return "fake CRS" to
let kernel / software to issue a new PCI_VENDOR_ID read request again
after timeout. After some timeout previous PIO transfer should complete
and therefore advk_pcie_pio_is_running returns false.
> if advk_pcie_pio_is_running(pcie) == true, is that an HW error ?
No. It indicates that software (kernel) was impatient for previous
config read / write request and did not wait for previous completion. So
at the time when kernel tried to issue a new (this) config read request,
previous one was still running (advk_pcie_pio_is_running returned true)
and therefore driver was not able to issue a new config read request.
In patch 3/3 I increased wait timeout so this situation when
advk_pcie_pio_is_running returns true should not happen. Or rather to
say, I was not able to reproduce it anymore.
> Lorenzo
>
> > + } else {
> > + *val = 0xffffffff;
> > + return PCIBIOS_SET_FAILED;
> > + }
> > }
> >
> > /* Program the control register */
> > @@ -729,15 +782,27 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
> > advk_writel(pcie, 1, PIO_START);
> >
> > ret = advk_pcie_wait_pio(pcie);
> > + if (ret < 0) {
> > + /*
> > + * For PCI_VENDOR_ID register, return Completion Retry Status
> > + * so caller tries to issue the request again instead of failing
> > + */
> > + if (where == PCI_VENDOR_ID) {
> > + *val = CFG_RD_CRS_VAL;
> > + return PCIBIOS_SUCCESSFUL;
> > + } else {
> > + *val = 0xffffffff;
> > + return PCIBIOS_SET_FAILED;
> > + }
> > + }
> > +
> > + /* Check PIO status and get the read result */
> > + ret = advk_pcie_check_pio_status(pcie, val);
> > if (ret < 0) {
> > *val = 0xffffffff;
> > return PCIBIOS_SET_FAILED;
> > }
> >
> > - advk_pcie_check_pio_status(pcie);
> > -
> > - /* Get the read result */
> > - *val = advk_readl(pcie, PIO_RD_DATA);
> > if (size == 1)
> > *val = (*val >> (8 * (where & 3))) & 0xff;
> > else if (size == 2)
> > @@ -801,7 +866,9 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
> > if (ret < 0)
> > return PCIBIOS_SET_FAILED;
> >
> > - advk_pcie_check_pio_status(pcie);
> > + ret = advk_pcie_check_pio_status(pcie, NULL);
> > + if (ret < 0)
> > + return PCIBIOS_SET_FAILED;
> >
> > return PCIBIOS_SUCCESSFUL;
> > }
> > --
> > 2.20.1
> >
