On Fri, Jun 18, 2021 at 02:38:21PM +0800, Artem Lapkin wrote: > Device set same 256 bytes maximum read request size equal MAX_READ_REQ_SIZE > was find some issue with HDMI scrambled picture and nvme devices > at intensive writing... Wait a minute. We're getting way too much of this MRRS fiddling with too little understanding of what the real problem is, and this is becoming a maintenance problem. We need more details about what the problem is and what specific devices are affected. If this is a defect in the host bridge, we should have published errata about this because AFAICT there is nothing in the spec that limits the MRRS the OS can program. If we need to work around a problem, the quirk should relate to the device that is defective, not to every PCI device that could potentially be plugged in. Related recent issue: https://lore.kernel.org/r/20210528203224.GA1516603@bjorn-Precision-5520 > [ 4.798971] nvme 0000:01:00.0: fix MRRS from 512 to 256 > > This quirk setup same MRRS if we try solve this problem with > pci=pcie_bus_perf kernel command line param > > Signed-off-by: Artem Lapkin <art@xxxxxxxxxx> > --- > drivers/pci/controller/dwc/pci-meson.c | 27 ++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c > index 686ded034f22..e2d40e5c2661 100644 > --- a/drivers/pci/controller/dwc/pci-meson.c > +++ b/drivers/pci/controller/dwc/pci-meson.c > @@ -466,6 +466,33 @@ static int meson_pcie_probe(struct platform_device *pdev) > return ret; > } > > +static void meson_pcie_quirk(struct pci_dev *dev) > +{ > + int mrrs; > + > + /* no need quirk */ > + if (pcie_bus_config != PCIE_BUS_DEFAULT) > + return; > + > + /* no need for root bus */ > + if (pci_is_root_bus(dev->bus)) > + return; > + > + mrrs = pcie_get_readrq(dev); > + > + /* > + * set same 256 bytes maximum read request size equal MAX_READ_REQ_SIZE > + * was find some issue with HDMI scrambled picture and nvme devices > + * at intensive writing... > + */ > + > + if (mrrs != MAX_READ_REQ_SIZE) { > + dev_info(&dev->dev, "fix MRRS from %d to %d\n", mrrs, MAX_READ_REQ_SIZE); > + pcie_set_readrq(dev, MAX_READ_REQ_SIZE); > + } > +} > +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, meson_pcie_quirk); > + > static const struct of_device_id meson_pcie_of_match[] = { > { > .compatible = "amlogic,axg-pcie", > -- > 2.25.1 >
