On Thu, May 19, 2011 at 10:28 AM, Jan Zwiegers <jan@xxxxxxxxxxxxxxxxxxxx> wrote: > I have the problem below where my PCI card's second BAR does not get > assigned. > What can be the cause of this problem? > The last kernel I tested on which worked OK was 2.6.27. > My current problematic kernel 2.6.35. > > 05:01.0 Unassigned class [ff00]: Eagle Technology PCI-703 Analog I/O Card > (rev 5c) > Flags: bus master, slow devsel, latency 32, IRQ 22 > Memory at 93b00000 (type 3, prefetchable) [size=2K] > Memory at <unassigned> (type 3, prefetchable) > Capabilities: [80] #00 [0600] > Kernel modules: pci703drv Could be resource exhaustion or, more likely, we ran out because we now assign resource to things that don't need them, leaving none for things that *do* need them. This sounds like a regression, so we should open a bugzilla for it and attach dmesg logs from 2.6.27 and 2.6.35. Does this problem keep the driver from working? (Sometimes drivers don't actually use all the BARs a device supports.) Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
