On Thu 03 Jun 05:38 CDT 2021, Manivannan Sadhasivam wrote: > Add devicetree binding for Qualcomm PCIe EP controller used in platforms > like SDX55. The EP controller is based on the Designware core with > Qualcomm specific wrappers. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> > --- > .../devicetree/bindings/pci/qcom,pcie-ep.yaml | 144 ++++++++++++++++++ > 1 file changed, 144 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > new file mode 100644 > index 000000000000..3e357cb03a5c > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > @@ -0,0 +1,144 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm PCIe Endpoint Controller binding > + > +maintainers: > + - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> > + > +allOf: > + - $ref: "pci-ep.yaml#" > + > +properties: > + compatible: > + const: qcom,sdx55-pcie-ep The binding looks good, but this is going to cause us an inevitable warning as we'd have to describe the controller twice (rc + ep) in the sdx55.dtsi. @Rob, what do you suggest we do about this, because it's the same problem currently responsible for hundreds of warnings in the case of GENI (where each node is duplicated for different functions). > + > + reg: > + items: > + - description: Qualcomm specific PARF configuration registers > + - description: Designware PCIe registers > + - description: External local bus interface registers > + - description: Address Translation Unit (ATU) registers > + - description: Memory region used to map remote RC address space > + - description: Qualcomm specific TCSR registers tcsr is separate hardware block with "misc" registers, I think it's better if we describe that as qcom,sdx55-tcsr, syscon and use the syscon API to access those registers... Regards, Bjorn > + > + reg-names: > + items: > + - const: parf > + - const: dbi > + - const: elbi > + - const: atu > + - const: addr_space > + - const: tcsr > + > + clocks: > + items: > + - description: PCIe Auxiliary clock > + - description: PCIe CFG AHB clock > + - description: PCIe Master AXI clock > + - description: PCIe Slave AXI clock > + - description: PCIe Slave Q2A AXI clock > + - description: PCIe Sleep clock > + - description: PCIe Reference clock > + > + clock-names: > + items: > + - const: aux > + - const: cfg > + - const: bus_master > + - const: bus_slave > + - const: slave_q2a > + - const: sleep > + - const: ref > + > + interrupts: > + maxItems: 1 > + description: PCIe Global interrupt > + > + interrupt-names: > + const: global > + > + reset-gpios: > + description: GPIO that is being used as PERST# input signal > + maxItems: 1 > + > + wake-gpios: > + description: GPIO that is being used as WAKE# output signal > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + reset-names: > + const: core > + > + power-domains: > + maxItems: 1 > + > + phys: > + maxItems: 1 > + > + phy-names: > + const: pciephy > + > + num-lanes: > + default: 2 > + > +required: > + - compatible > + - reg > + - reg-names > + - clocks > + - clock-names > + - interrupts > + - interrupt-names > + - reset-gpios > + - resets > + - reset-names > + - power-domains > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,gcc-sdx55.h> > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + pcie_ep: pcie-ep@40000000 { > + compatible = "qcom,sdx55-pcie-ep"; > + reg = <0x01c00000 0x3000>, > + <0x40000000 0xf1d>, > + <0x40000f20 0xc8>, > + <0x40001000 0x1000>, > + <0x42000000 0x1000>, > + <0x01fcb000 0x1000>; > + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", > + "tcsr"; > + > + clocks = <&gcc GCC_PCIE_AUX_CLK>, > + <&gcc GCC_PCIE_CFG_AHB_CLK>, > + <&gcc GCC_PCIE_MSTR_AXI_CLK>, > + <&gcc GCC_PCIE_SLV_AXI_CLK>, > + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, > + <&gcc GCC_PCIE_SLEEP_CLK>, > + <&gcc GCC_PCIE_0_CLKREF_CLK>; > + clock-names = "aux", "cfg", "bus_master", "bus_slave", > + "slave_q2a", "sleep", "ref"; > + > + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "global"; > + reset-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>; > + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; > + resets = <&gcc GCC_PCIE_BCR>; > + reset-names = "core"; > + power-domains = <&gcc PCIE_GDSC>; > + phys = <&pcie0_lane>; > + phy-names = "pciephy"; > + max-link-speed = <3>; > + num-lanes = <2>; > + > + status = "disabled"; > + }; > -- > 2.25.1 >
