On Wed, May 26, 2021 at 8:59 PM Christoph Hellwig <hch@xxxxxx> wrote:
>
> On Wed, May 26, 2021 at 08:11:41PM +0800, Kai-Heng Feng wrote:
> > On Wed, May 26, 2021 at 10:49 AM Keith Busch <kbusch@xxxxxxxxxx> wrote:
> > >
> > > On Wed, May 26, 2021 at 10:02:27AM +0800, Koba Ko wrote:
> > > > On Tue, May 25, 2021 at 3:44 PM Christoph Hellwig <hch@xxxxxx> wrote:
> > > > >
> > > > > On Thu, May 20, 2021 at 11:33:15AM +0800, Koba Ko wrote:
> > > > > > After resume, host can't change power state of the closed controller
> > > > > > from D3cold to D0.
> > > > >
> > > > > Why?
> > > > As per Kai-Heng said, it's a regression introduced by commit
> > > > b97120b15ebd ("nvme-pci:
> > > > use simple suspend when a HMB is enabled"). The affected NVMe is using HMB.
> > >
> > > That really doesn't add up. The mentioned commit restores the driver
> > > behavior for HMB drives that existed prior to d916b1be94b6d from kernel
> > > 5.3. Is that NVMe device broken in pre-5.3 kernels, too?
> >
> > Quite likely. The system in question is a late 2020 Ice Lake laptop,
> > so it was released after 5.3 kernel.
>
> This is just a mess. We had to disable the sensible power state based
> suspend on these systems because Intel broke it by just cutting the power
> off. And now the shutdown based one doesn't work either because it can't
> handle d3cold. Someone we need to stop Intel and the integrators from
> doing stupid things, and I'm not sure how.
To be fair, resuming the NVMe from D3hot is much slower than keep it
at D0, which gives us a faster s2idle resume time. And now AMD also
requires s2idle on their latest laptops.
And it's more like NVMe controllers don't respect PCI D3hot.
>
> But degrading all systems even more is just a bad idea, so I fear we'll
> need a quirk again. Can you figure out by switching the cards if this
> is the fault of the platform or the nvme device?
Here's the original bug report:
https://bugs.launchpad.net/bugs/1912057
Because the NVMe continues to work after s2idle and the symbol is
rather subtle, so I suspect this is not platform or vendor specific.
Is it possible to disable DMA for HMB NVMe on suspend?
Kai-Heng
>
> >
> > Kai-Heng
> ---end quoted text---
