[PATCH] arm64: dts: rockchip: Update PCI host bridge window to 32-bit address memory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The PCIe host bridge on RK3399 advertises a single address range
marked as 64-bit memory even though it lies entirely below 4GB. While
previously, the OF PCI range parser treated 64-bit ranges more
leniently (i.e., as 32-bit), since commit 9d57e61bf723 ("of/pci: Add
IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses") the
code takes a stricter view and treats the ranges as advertised in the
device tree (i.e, as 64-bit).

The change in behaviour causes failure when allocating bus addresses
to devices connected behind a PCI-to-PCI bridge that require
non-prefetchable memory ranges. The allocation failure was observed
for certain Samsung NVMe drives connected to RockPro64 boards.

Update the host bridge window attributes to treat it as 32-bit address
memory. This fixes the allocation failure observed since commit
9d57e61bf723.

Reported-by: Alexandru Elisei <alexandru.elisei@xxxxxxx>
Link: https://lore.kernel.org/r/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@xxxxxxx
Suggested-by: Robin Murphy <robin.murphy@xxxxxxx>
Signed-off-by: Punit Agrawal <punitagrawal@xxxxxxxxx>
Cc: Heiko Stuebner <heiko@xxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
---
Hi,

The patch fixes the failure observed with detecting certain Samsung
NVMe drives on RK3399 based boards.

Hopefully, the folks on this thread can provide some input on the
reason the host bridge window was originally marked as 64-bit or if
there are any downsides to applying the patch.

Thanks,
Punit

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 634a91af8e83..4b854eb21f72 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -227,7 +227,7 @@ pcie0: pcie@f8000000 {
 		       <&pcie_phy 2>, <&pcie_phy 3>;
 		phy-names = "pcie-phy-0", "pcie-phy-1",
 			    "pcie-phy-2", "pcie-phy-3";
-		ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+		ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
 			 <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
 		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
 			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
-- 
2.30.2




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux