Capitalize "Add" in the subject.
On Tue, Apr 27, 2021 at 01:51:39PM -0400, Jim Quinlan wrote:
> The shutdown() call is similar to the remove() call except the former does
> not need to invoke pci_{stop,remove}_root_bus(), and besides, errors occur
> if it does.
This doesn't explain why shutdown() is necessary. "errors occur"
might be a hint, except that AFAICT, many similar drivers do invoke
pci_stop_root_bus() and pci_remove_root_bus() (several of them while
holding pci_lock_rescan_remove()), without implementing .shutdown().
It is ... unfortunate that there's such a variety of implementations
here. I don't believe these driver differences are all necessary
consequences of hardware differences.
> Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
> ---
> drivers/pci/controller/pcie-brcmstb.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index d3af8d84f0d6..a1fe1a2ada48 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -1340,6 +1340,15 @@ static int brcm_pcie_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static void brcm_pcie_shutdown(struct platform_device *pdev)
> +{
> + struct brcm_pcie *pcie = platform_get_drvdata(pdev);
> +
> + if (pcie->has_err_report)
> + brcm_unregister_die_notifiers(pcie);
> + __brcm_pcie_remove(pcie);
> +}
> +
> static const struct of_device_id brcm_pcie_match[] = {
> { .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
> { .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg },
> @@ -1460,6 +1469,7 @@ static const struct dev_pm_ops brcm_pcie_pm_ops = {
> static struct platform_driver brcm_pcie_driver = {
> .probe = brcm_pcie_probe,
> .remove = brcm_pcie_remove,
> + .shutdown = brcm_pcie_shutdown,
> .driver = {
> .name = "brcm-pcie",
> .of_match_table = brcm_pcie_match,
> --
> 2.17.1
>
