Series first introduces generic support for DOE mailboxes as defined in the ECN to the PCIe r5.0 specification available from the PCI SIG [0] A user is then introduced in the form of the table access protocol defined in the CXL 2.0 specification [1] used to access the Coherent Device Attribute Table (CDAT) defined in [2] Finally, in two patches that are not intended for merging, an example of a generic IOCTL interface to perform synchronous exchanges from user space in a kernel mediated fashion is introduced. The current consensus seems in favour of not introducing such an interface, but instead providing per protocol interfaces where appropriate. As this code was developed in parallel with that discussion and may be of use to someone it is included here. Open questions. * Do we need to prevent userspace access to the DOE when the kernel is managing it (registered by driver)? Discussion in thread: https://lore.kernel.org/linux-pci/20210419165451.2176200-1-Jonathan.Cameron@xxxxxxxxxx/ * Does a generic userspace mediation interface make sense? Currently it seems not, but as it was nearly ready, I've included it in this patch set anyway. * Move CXL cdat handling to a separate file, or wait until we can see how it is going to be used? Changes since v3 Thanks to Ira, Bjorn and Dan for feedback. * Addition of a generic IOCTL interface and demo program for discussion. * Fixed an issue with accidentally disabling interrupts. * Ensure IRQ_HANDLED always returned as clearing of BUSY can result in an interrupt, but there is no means of identifying this. The best that can be done is to eat the interrupt. * Edited comments to more directly tie them to the code the referred to. * Lock scope documentation update. * Dropped the CDAT dump to log patch as we are hopefully getting closer to this being applied. * Fixed the references to pcie_ missed when renaming to pci_ in v3. Set based on cxl/next All testing conducted against QEMU emulation of a CXL type 3 device in conjunction with DOE mailbox patches v5 [3, 4] [0] https://pcisig.com/specifications [1] https://www.computeexpresslink.org/download-the-specification [2] https://uefi.org/node/4093 [3] https://lore.kernel.org/qemu-devel/20210202005948.241655-1-ben.widawsky@xxxxxxxxx/ [4] https://lore.kernel.org/qemu-devel/1619454964-10190-1-git-send-email-cbrowy@xxxxxxxxxxxxxxxx/ Jonathan Cameron (5): PCI: Add vendor ID for the PCI SIG PCI/DOE: Add Data Object Exchange support cxl/mem: Add CDAT table reading from DOE DONOTMERGE PCI/DOE Add per DOE chrdev for ioctl based access DONOTMERGE: PCI/DOE: Add userspace example program to tools/pci drivers/cxl/Kconfig | 1 + drivers/cxl/cxl.h | 21 + drivers/cxl/mem.c | 174 ++++++++ drivers/cxl/mem.h | 6 + drivers/pci/Kconfig | 8 + drivers/pci/Makefile | 1 + drivers/pci/doe.c | 794 ++++++++++++++++++++++++++++++++++ drivers/pci/pci-driver.c | 3 +- include/linux/pci-doe.h | 100 +++++ include/linux/pci.h | 3 + include/linux/pci_ids.h | 1 + include/uapi/linux/pci_doe.h | 32 ++ include/uapi/linux/pci_regs.h | 29 +- tools/pci/Build | 1 + tools/pci/Makefile | 9 +- tools/pci/doetest.c | 131 ++++++ 16 files changed, 1311 insertions(+), 3 deletions(-) create mode 100644 drivers/pci/doe.c create mode 100644 include/linux/pci-doe.h create mode 100644 include/uapi/linux/pci_doe.h create mode 100644 tools/pci/doetest.c base-commit: 35c32e3095d396c750f5cdfdaa94cba83d9b23c6 -- 2.19.1
