Robin Murphy <robin.murphy@xxxxxxx> writes:
> [ +linux-pci for visibility ]
>
> On 2021-05-18 10:09, Alexandru Elisei wrote:
>> After doing a git bisect I was able to trace the following error when booting my
>> rockpro64 v2 (rk3399 SoC) with a PCIE NVME expansion card:
>> [..]
>> [ 0.305183] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
>> [ 0.305248] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff ->
>> 0x00fa000000
>> [ 0.305285] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff ->
>> 0x00fbe00000
>> [ 0.306201] rockchip-pcie f8000000.pcie: supply vpcie1v8 not found, using dummy
>> regulator
>> [ 0.306334] rockchip-pcie f8000000.pcie: supply vpcie0v9 not found, using dummy
>> regulator
>> [ 0.373705] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
>> [ 0.373730] pci_bus 0000:00: root bus resource [bus 00-1f]
>> [ 0.373751] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit]
>> [ 0.373777] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus
>> address [0xfbe00000-0xfbefffff])
>> [ 0.373839] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
>> [ 0.373973] pci 0000:00:00.0: supports D1
>> [ 0.373992] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
>> [ 0.378518] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]),
>> reconfiguring
>> [ 0.378765] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
>> [ 0.378869] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
>> [ 0.379051] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256)
>> [ 0.379661] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by
>> 2.5 GT/s PCIe x4 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe
>> x4 link)
>> [ 0.393269] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
>> [ 0.393311] pci 0000:00:00.0: BAR 14: no space for [mem size 0x00100000]
>> [ 0.393333] pci 0000:00:00.0: BAR 14: failed to assign [mem size 0x00100000]
>> [ 0.393356] pci 0000:01:00.0: BAR 0: no space for [mem size 0x00004000 64bit]
>> [ 0.393375] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00004000 64bit]
>> [ 0.393397] pci 0000:00:00.0: PCI bridge to [bus 01]
>> [ 0.393839] pcieport 0000:00:00.0: PME: Signaling with IRQ 78
>> [ 0.394165] pcieport 0000:00:00.0: AER: enabled with IRQ 78
>> [..]
>> to the commit 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to
>> resource flags for
>> 64-bit memory addresses").
>
> FWFW, my hunch is that the host bridge advertising no 32-bit memory
> resource, only only a single 64-bit non-prefetchable one (even though
> it's entirely below 4GB) might be a bit weird and tripping something
> up in the resource assignment code. It certainly seems like the thing
> most directly related to the offending commit.
>
> I'd be tempted to try fiddling with that in the DT (i.e. changing
> 0x83000000 to 0x82000000 in the PCIe node's "ranges" property) to see
> if it makes any difference. Note that even if it helps, though, I
> don't know whether that's the correct fix or just a bodge around a
> corner-case bug somewhere in the resource code.
>From digging into this further the failure seems to be due to a mismatch
of flags when allocating resources in pci_bus_alloc_from_region() -
if ((res->flags ^ r->flags) & type_mask)
continue;
Though I am also not sure why the failure is only being reported on
RK3399 - does a single 64-bit window have anything to do with it?
Also, I don't understand the motivation for the original commit. It is
not clear what problem it is solving and the discussion thread seems to
suggest that things work fine without it[0].
[0] https://lore.kernel.org/linux-devicetree/CAL_JsqJXKVUFh9KrJjobn-jE-PFKN0w-V_i3qkfBrpTah4g8Xw@xxxxxxxxxxxxxx/
[...]
