Re: [PATCH V2] PCI: tegra: Fix building Tegra194 PCIe driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 20, 2021 at 10:01:23AM +0100, Jon Hunter wrote:
> Commit 7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM
> errata") caused a few build regressions for the Tegra194 PCIe driver
> which are:
> 
> 1. The Tegra194 PCIe driver can no longer be built as a module. This
>    was caused by removing the Makefile entry to build the pcie-tegra.c
>    based upon the CONFIG_PCIE_TEGRA194 option. Therefore, restore this
>    so that we can build the driver as a module if ACPI support is not
>    enabled in the kernel.

I'm not sure what "if ACPI support is not enabled in the kernel" is
telling me.  Does it mean that we can only build tegra194 as a module
if ACPI is not enabled?  I don't think so (at least, I don't think
Kconfig enforces that).

Should the "if ACPI support is not enabled ..." part just be dropped?

I assume it should be possible to build the kernel with ACPI enabled
and with pcie-tegra194 as a module?

> 2. If CONFIG_PCIE_TEGRA194 is configured to build the driver as a
>    module, at the same time that CONFIG_ACPI and CONFIG_PCI_QUIRKS are
>    selected to build the driver into the kernel, then the necessary
>    functions in the driver to probe and remove the device when booting
>    with device-tree and not compiled into to the driver. This prevents
>    the PCIe devices being probed when booting with device-tree. Fix this
>    by using the IS_ENABLED() macro.

The #ifdef vs IS_ENABLED() difference is kind of subtle and I have to
figure it out every time.  Maybe something like this?

  7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM
  errata") added "#ifdef CONFIG_PCIE_TEGRA194" around the native
  driver.

  But if we set CONFIG_PCIE_TEGRA194=m to build the driver as a
  module, autoconf.h contains "#define CONFIG_PCIE_TEGRA194_MODULE 1"
  (not "#define CONFIG_PCIE_TEGRA194 1"), so the #ifdef excludes the
  driver.

  Instead, use "IS_ENABLED(CONFIG_PCIE_TEGRA194)", which checks for
  either CONFIG_PCIE_TEGRA194 or CONFIG_PCIE_TEGRA194_MODULE.

> 3. The below build warnings to be seen with particular kernel
>    configurations. Fix these by adding the necessary guards around these
>    variable definitions.
> 
>   drivers/pci/controller/dwc/pcie-tegra194.c:259:18: warning:
>   	‘event_cntr_data_offset’ defined but not used [-Wunused-const-variable=]
>   drivers/pci/controller/dwc/pcie-tegra194.c:250:18: warning:
>   	‘event_cntr_ctrl_offset’ defined but not used [-Wunused-const-variable=]
>   drivers/pci/controller/dwc/pcie-tegra194.c:243:27: warning:
>   	‘pcie_gen_freq’ defined but not used [-Wunused-const-variable=]
> 
> Fixes: 7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata")
> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>

This is a candidate for v5.13, since we merged 7f100744749e for
v5.13-rc1.

> ---
>  drivers/pci/controller/dwc/Makefile        | 1 +
>  drivers/pci/controller/dwc/pcie-tegra194.c | 6 +++++-
>  2 files changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index eca805c1a023..f0d1e2d8c022 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -32,6 +32,7 @@ obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
>  # depending on whether ACPI, the DT driver, or both are enabled.
>  
>  obj-$(CONFIG_PCIE_AL) += pcie-al.o
> +obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
>  obj-$(CONFIG_PCI_HISI) += pcie-hisi.o

It sounds like the interesting case is this:

  CONFIG_ARM64=y
  CONFIG_ACPI=y
  CONFIG_PCI_QUIRKS=y
  CONFIG_PCIE_TEGRA194=m

I don't know how this works in this case:

  obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
  obj-$(CONFIG_ARM64) += pcie-tegra194.o

We want tegra194_acpi_init() and the rest of the ECAM quirk to be
compiled into the static kernel.  And we want tegra_pcie_dw_probe(),
tegra_pcie_dw_remove(), etc, compiled into a module.

Does kbuild really compile pcie-tegra194.c twice?  And if so, it's not
a problem that both the static kernel and the module contain a
tegra194_pcie_ops symbol?

>  ifdef CONFIG_ACPI
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index b19775ab134e..ae70e53a7826 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -240,13 +240,16 @@
>  #define EP_STATE_DISABLED	0
>  #define EP_STATE_ENABLED	1
>  
> +#if IS_ENABLED(CONFIG_PCIE_TEGRA194)
>  static const unsigned int pcie_gen_freq[] = {
>  	GEN1_CORE_CLK_FREQ,
>  	GEN2_CORE_CLK_FREQ,
>  	GEN3_CORE_CLK_FREQ,
>  	GEN4_CORE_CLK_FREQ
>  };
> +#endif

This makes the minimal patch, but as Krzysztof suggests, I would
prefer to move the whole struct so it's just inside the
CONFIG_PCIE_TEGRA194 #ifdef.

> +#if defined(CONFIG_PCIEASPM)
>  static const u32 event_cntr_ctrl_offset[] = {
>  	0x1d8,
>  	0x1a8,
> @@ -264,6 +267,7 @@ static const u32 event_cntr_data_offset[] = {
>  	0x1c8,
>  	0x1dc
>  };
> +#endif

Similar for the CONFIG_PCIEASPM #ifdef.

>  struct tegra_pcie_dw {
>  	struct device *dev;
> @@ -409,7 +413,7 @@ const struct pci_ecam_ops tegra194_pcie_ops = {
>  };
>  #endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */
>  
> -#ifdef CONFIG_PCIE_TEGRA194
> +#if IS_ENABLED(CONFIG_PCIE_TEGRA194)
>  static inline struct tegra_pcie_dw *to_tegra_pcie(struct dw_pcie *pci)
>  {
> -- 
> 2.25.1
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux