Re: [RFC v2 1/7] PCI: Introduce pci_host_bridge::domain_nr

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 10, 2021 at 09:44:29PM +0800, Boqun Feng wrote:
> [Copy Rob]
> 
> On Thu, May 06, 2021 at 11:52:45AM +0100, Lorenzo Pieralisi wrote:
> > On Tue, May 04, 2021 at 08:16:30AM +0300, Mike Rapoport wrote:
> > > On Mon, May 03, 2021 at 10:46:29PM +0800, Boqun Feng wrote:
> > > > Currently we retrieve the PCI domain number of the host bridge from the
> > > > bus sysdata (or pci_config_window if PCI_DOMAINS_GENERIC=y). Actually
> > > > we have the information at PCI host bridge probing time, and it makes
> > > > sense that we store it into pci_host_bridge. One benefit of doing so is
> > > > the requirement for supporting PCI on Hyper-V for ARM64, because the
> > > > host bridge of Hyper-V doesnt' have pci_config_window, whereas ARM64 is
> > > > a PCI_DOMAINS_GENERIC=y arch, so we cannot retrieve the PCI domain
> > > > number from pci_config_window on ARM64 Hyper-V guest.
> > > > 
> > > > As the preparation for ARM64 Hyper-V PCI support, we introduce the
> > > > domain_nr in pci_host_bridge, and set it properly at probing time, then
> > > > for PCI_DOMAINS_GENERIC=y archs, bus domain numbers are set by the
> > > > bridge domain_nr.
> > > > 
> > > > Signed-off-by: Boqun Feng <boqun.feng@xxxxxxxxx>
> > > > ---
> > > >  arch/arm/kernel/bios32.c              |  2 ++
> > > >  arch/arm/mach-dove/pcie.c             |  2 ++
> > > >  arch/arm/mach-mv78xx0/pcie.c          |  2 ++
> > > >  arch/arm/mach-orion5x/pci.c           |  2 ++
> > > >  arch/arm64/kernel/pci.c               |  3 +--
> > > >  arch/mips/pci/pci-legacy.c            |  2 ++
> > > >  arch/mips/pci/pci-xtalk-bridge.c      |  2 ++
> > > >  drivers/pci/controller/pci-ftpci100.c |  2 ++
> > > >  drivers/pci/controller/pci-mvebu.c    |  2 ++
> > > >  drivers/pci/pci.c                     |  4 ++--
> > > >  drivers/pci/probe.c                   |  7 ++++++-
> > > >  include/linux/pci.h                   | 11 ++++++++---
> > > >  12 files changed, 33 insertions(+), 8 deletions(-)
> > > > 
> > > > diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
> > > > index e7ef2b5bea9c..4942cd681e41 100644
> > > > --- a/arch/arm/kernel/bios32.c
> > > > +++ b/arch/arm/kernel/bios32.c
> > > > @@ -471,6 +471,8 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
> > > >  				bridge->sysdata = sys;
> > > >  				bridge->busnr = sys->busnr;
> > > >  				bridge->ops = hw->ops;
> > > > +				if (IS_ENABLED(CONFIG_PCI_DOMAINS_GENERIC))
> > > > +					bridge->domain_nr = pci_bus_find_domain_nr(sys, parent);
> > > >  
> > > >  				ret = pci_scan_root_bus_bridge(bridge);
> > > >  			}
> > > > diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
> > > > index ee91ac6b5ebf..92eb8484b49b 100644
> > > > --- a/arch/arm/mach-dove/pcie.c
> > > > +++ b/arch/arm/mach-dove/pcie.c
> > > > @@ -167,6 +167,8 @@ dove_pcie_scan_bus(int nr, struct pci_host_bridge *bridge)
> > > >  	bridge->sysdata = sys;
> > > >  	bridge->busnr = sys->busnr;
> > > >  	bridge->ops = &pcie_ops;
> > > > +	if (IS_ENABLED(CONFIG_PCI_DOMAINS_GENERIC))
> > > > +		bridge->domain_nr = pci_bus_find_domain_nr(sys, NULL);
> > > 
> > > The check for CONFIG_PCI_DOMAINS_GENERIC is excessive because there is a
> > > stub for pci_bus_find_domain_nr().
> > > 
> > > I'm not an expert in PCI, but maybe the repeated assignment of
> > > bridge->domain_nr can live in the generic code, say, in
> > > pci_scan_root_bus_bridge(). E.g. it will set the domain_nr when it is zero.
> > > 
> > > >  
> > 
> > Yes, this churn should be avoided. We need a sentinel value to detect
> > whether the domain_nr is invalid (0 is a valid domain) so generic code
> > (ie pci_scan_root_bus_bridge() and friends) has to call generic
> > functions to get it (pci_bus_find_domain_nr()).
> > 
> 
> Agreed. Thank you all for the inputs.
> 
> According to [1], "PCI Conventional" has at most 256 PCI bus segments
> and "PCI Express" has at most 65536 "PCI Segments Groups", so any value
> outside [0, 65536] can be used as a sentinel. I'm planning to use -1
> like:
> 
> 	#define PCI_DOMAIN_NR_NOT_SET (-1)
> 
> 	(in pci_alloc_host_bridge())
> 	bridge->domain_nr = PCI_DOMAIN_NR_NOT_SET;
> 
> 	(in pci_register_host_bridge())
> 	if (bridge->domain_nr == PCI_DOMAIN_NR_NOT_SET)
> 		bridge->domain_nr = pci_bus_find_domain_nr(...);

It should be fine. I'd move the check

if (bridge->domain_nr == PCI_DOMAIN_NR_NOT_SET)

in pci_bus_find_domain_nr()

to make the logic contained in there but that's a nit.

Lorenzo

> Thoughts?
> 
> Regards,
> Boqun
> 
> [1]: https://wiki.osdev.org/PCI_Express
> 
> > We can implement it as a flag or function pointer in the struct
> > pci_host_bridge, if the flag or function pointer is not set the
> > generic pci_bus_find_domain_nr() should be called.
> > 
> > Lorenzo



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux