Hi, I have a custom made powerpc 460EX board. On that board u-boot can see a PCI device but Linux kernel cannot see it. What could be the problem? On u-boot "pci 2" commands displays following device: Scanning PCI devices on bus 2 BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 02.00.00 0x1000 0x0072 Mass storage controller 0x00 And when the kernel is booted, there is only one pci device (bridge): #ls /sys/bus/pci/devices 0000:80:00.0 Thanks in advance. -Prashant -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
