Re: [PATCH v2 2/3] PCI: dwc: Visconti: PCIe RC controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Thanks for your review.

On Thu, Apr 29, 2021 at 06:10:40PM -0500, Bjorn Helgaas wrote:
> Please use something like this as the subject to match existing
> convention:
> 
>   PCI: visconti: Add Toshiba Visconti PCIe host controller driver
> 
> (You can use "git log --oneline drivers/pci/controller/dwc" to learn
> this.)

OK, I will fix this.

> 
> On Mon, Apr 19, 2021 at 03:35:12PM +0900, Nobuhiro Iwamatsu wrote:
> > Add support to PCIe RC controller on Toshiba Visconti ARM SoCs. PCIe controller is based of Synopsys
> > DesignWare PCIe core.
> > 
> > This patch does not yet use the clock framework to control the clock. This will be replaced in the
> > future.
> 
> Wrap this text to fit nicely in 75 columns.

I will fix this.

> 
> > Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@xxxxxxxxxxxxx>
> > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> > ---
> >  drivers/pci/controller/dwc/Kconfig         |   9 +
> >  drivers/pci/controller/dwc/Makefile        |   1 +
> >  drivers/pci/controller/dwc/pcie-visconti.c | 333 +++++++++++++++++++++
> >  3 files changed, 343 insertions(+)
> >  create mode 100644 drivers/pci/controller/dwc/pcie-visconti.c
> > 
> > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> > index b9aaa84452c4..043c2c70d566 100644
> > --- a/drivers/pci/controller/dwc/Kconfig
> > +++ b/drivers/pci/controller/dwc/Kconfig
> > @@ -286,6 +286,15 @@ config PCIE_TEGRA194_EP
> >  	  in order to enable device-specific features PCIE_TEGRA194_EP must be
> >  	  selected. This uses the DesignWare core.
> >  
> > +config PCIE_VISCONTI
> 
> Consider using PCIE_VISCONTI_HOST in case you ever adapt this hardware
> to work in endpoint mode.

As you pointed out, this device also supports Endpoint mode. I will change to
PCIE_VISCONTI_HOST.

> 
> > +	bool "Toshiba VISCONTI PCIe controllers"
> 
> s/VISCONTI/Visconti/ to match usage below.

OK.

> 
> > +	depends on ARCH_VISCONTI || COMPILE_TEST
> > +	depends on PCI_MSI_IRQ_DOMAIN
> > +	select PCIE_DW_HOST
> > +	help
> > +	  Say Y here if you want PCIe controller support on Toshiba Visconti SoC.
> > +	  This driver supports TMPV77xx.
> 
> What is "TMPV77xx"?  A SoC?  A reference platform?

This is a SoC. I will update description.

> 
> >  config PCIE_UNIPHIER
> >  	bool "Socionext UniPhier PCIe host controllers"
> >  	depends on ARCH_UNIPHIER || COMPILE_TEST
> > diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> > index ba7c42f6df6f..46ac5d49dc75 100644
> > --- a/drivers/pci/controller/dwc/Makefile
> > +++ b/drivers/pci/controller/dwc/Makefile
> > @@ -20,6 +20,7 @@ obj-$(CONFIG_PCI_MESON) += pci-meson.o
> >  obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
> >  obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
> >  obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
> > +obj-$(CONFIG_PCIE_VISCONTI) += pcie-visconti.o
> >  
> >  # The following drivers are for devices that use the generic ACPI
> >  # pci_root.c driver but don't support standard ECAM config access.
> > diff --git a/drivers/pci/controller/dwc/pcie-visconti.c b/drivers/pci/controller/dwc/pcie-visconti.c
> > new file mode 100644
> > index 000000000000..a4739e7187f0
> > --- /dev/null
> > +++ b/drivers/pci/controller/dwc/pcie-visconti.c
> > @@ -0,0 +1,333 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * DWC PCIe RC driver for Toshiba Visconti ARM SoC
> > + *
> > + * Copyright (C) 2019, 2020 Toshiba Electronic Device & Storage Corporation
> > + * Copyright (C) 2020, TOSHIBA CORPORATION
> > + *
> > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> > + *
> 
> Remove spurious blank line.
> 

OK, I will fix this.

> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/gpio.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/init.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/pci.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/resource.h>
> > +#include <linux/types.h>
> > +
> > +#include "pcie-designware.h"
> > +#include "../../pci.h"
> > +
> > +struct visconti_pcie {
> > +	struct dw_pcie pci;
> > +	void __iomem *ulreg_base;
> > +	void __iomem *smu_base;
> > +	void __iomem *mpu_base;
> > +	struct clk *refclk;
> > +	struct clk *sysclk;
> > +	struct clk *auxclk;
> > +};
> > +
> > +#define PCIE_UL_REG_S_PCIE_MODE		0x00F4
> > +#define  PCIE_UL_REG_S_PCIE_MODE_EP	0x00
> > +#define  PCIE_UL_REG_S_PCIE_MODE_RC	0x04
> > +
> > +#define PCIE_UL_REG_S_PERSTN_CTRL	0x00F8
> > +#define  PCIE_UL_IOM_PCIE_PERSTN_I_EN	BIT(3)
> > +#define  PCIE_UL_DIRECT_PERSTN_EN	BIT(2)
> > +#define  PCIE_UL_PERSTN_OUT		BIT(1)
> > +#define  PCIE_UL_DIRECT_PERSTN		BIT(0)
> > +
> > +#define PCIE_UL_REG_S_PHY_INIT_02	0x0104
> > +#define  PCIE_UL_PHY0_SRAM_EXT_LD_DONE	BIT(0)
> > +
> > +#define PCIE_UL_REG_S_PHY_INIT_03	0x0108
> > +#define  PCIE_UL_PHY0_SRAM_INIT_DONE	BIT(0)
> > +
> > +#define PCIE_UL_REG_S_INT_EVENT_MASK1	0x0138
> > +#define  PCIE_UL_CFG_PME_INT		BIT(0)
> > +#define  PCIE_UL_CFG_LINK_EQ_REQ_INT	BIT(1)
> > +#define  PCIE_UL_EDMA_INT0		BIT(2)
> > +#define  PCIE_UL_EDMA_INT1		BIT(3)
> > +#define  PCIE_UL_EDMA_INT2		BIT(4)
> > +#define  PCIE_UL_EDMA_INT3		BIT(5)
> > +#define  PCIE_UL_S_INT_EVENT_MASK1_ALL  (PCIE_UL_CFG_PME_INT | PCIE_UL_CFG_LINK_EQ_REQ_INT | \
> > +					 PCIE_UL_EDMA_INT0 | PCIE_UL_EDMA_INT1 | \
> > +					 PCIE_UL_EDMA_INT2 | PCIE_UL_EDMA_INT3)
> > +
> 
> Please wrap the code here and below so it fits nicely in 80 columns.

checkpatch.pl allows up to 100 characters, is this a PCI driver rule?

> 
> > +#define PCIE_UL_REG_S_SB_MON		0x0198
> > +#define PCIE_UL_REG_S_SIG_MON		0x019C
> > +#define  PCIE_UL_CORE_RST_N_MON		BIT(0)
> > +
> > +#define PCIE_UL_REG_V_SII_DBG_00	0x0844
> > +#define PCIE_UL_REG_V_SII_GEN_CTRL_01	0x0860
> > +#define  PCIE_UL_APP_LTSSM_ENABLE	BIT(0)
> > +
> > +#define PCIE_UL_REG_V_PHY_ST_00		0x0864
> > +#define  PCIE_UL_SMLH_LINK_UP		BIT(0)
> > +
> > +#define PCIE_UL_REG_V_PHY_ST_02		0x0868
> > +#define  PCIE_UL_S_DETECT_ACT		0x01
> > +#define  PCIE_UL_S_L0			0x11
> > +
> > +#define PISMU_CKON_PCIE			0x0038
> > +#define  PISMU_CKON_PCIE_AUX_CLK	BIT(1)
> > +#define  PISMU_CKON_PCIE_MSTR_ACLK	BIT(0)
> > +
> > +#define PISMU_RSOFF_PCIE		0x0538
> > +#define  PISMU_RSOFF_PCIE_ULREG_RST_N	BIT(1)
> > +#define  PISMU_RSOFF_PCIE_PWR_UP_RST_N	BIT(0)
> > +
> > +#define PCIE_MPU_REG_MP_EN		0x0
> > +#define  MPU_MP_EN_DISABLE		BIT(0)
> > +
> > +#define PCIE_BUS_OFFSET			0x40000000
> > +
> > +/* Access registers in PCIe ulreg */
> > +static inline void visconti_ulreg_writel(struct visconti_pcie *pcie, u32 val, u32 reg)
> > +{
> > +	writel_relaxed(val, pcie->ulreg_base + reg);
> > +}
> > +
> > +/* Access registers in PCIe smu */
> > +static inline void visconti_smu_writel(struct visconti_pcie *pcie, u32 val, u32 reg)
> > +{
> > +	writel_relaxed(val, pcie->smu_base + reg);
> > +}
> > +
> > +/* Access registers in PCIe mpu */
> > +static inline void visconti_mpu_writel(struct visconti_pcie *pcie, u32 val, u32 reg)
> > +{
> > +	writel_relaxed(val, pcie->mpu_base + reg);
> > +}
> > +
> > +static inline u32 visconti_mpu_readl(struct visconti_pcie *pcie, u32 reg)
> 
> Don't bother with "inline" above and the signature will fit better in
> the line.  The compiler will inline these even if you don't specify
> it.

OK, I will update this.

> 
> > +{
> > +	return readl_relaxed(pcie->mpu_base + reg);
> > +}
> > +
> > +static int visconti_pcie_check_link_status(struct visconti_pcie *pcie)
> 
> "check_link_status" gives no hint about what the return value means.
> This looks like it might be similar to what other drivers do in
> *_pcie_link_up().
> 
> Can you hook things up so this generic code in dw_pcie_host_init()
> works for you?
> 
>         if (!dw_pcie_link_up(pci) && pci->ops && pci->ops->start_link) {
>                 ret = pci->ops->start_link(pci);
>                 if (ret)
>                         goto err_free_msi;
>         }


Thanks for your suggestion. I will investigate.

> 
> > +{
> > +	int err;
> > +	u32 val;
> > +
> > +	/* wait for linkup of phy link layer */
> > +	err = readl_relaxed_poll_timeout(pcie->ulreg_base + PCIE_UL_REG_V_PHY_ST_00, val,
> > +				 (val & PCIE_UL_SMLH_LINK_UP), 1000, 10000);
> > +	if (err)
> > +		return err;
> > +
> > +	/* wait for linkup of data link layer */
> > +	err = readl_relaxed_poll_timeout(pcie->ulreg_base + PCIE_UL_REG_V_PHY_ST_02, val,
> > +				 (val & PCIE_UL_S_DETECT_ACT), 1000, 10000);
> > +	if (err)
> > +		return err;
> > +
> > +	/* wait for LTSSM Status */
> > +	return readl_relaxed_poll_timeout(pcie->ulreg_base + PCIE_UL_REG_V_PHY_ST_02, val,
> > +				  (val & PCIE_UL_S_L0), 1000, 10000);
> > +}
> > +
> > +static int visconti_pcie_establish_link(struct pcie_port *pp)
> > +{
> > +	int ret;
> > +	u32 val;
> > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct visconti_pcie *pcie = dev_get_drvdata(pci->dev);
> 
> Reorder these in the order of use (as you did below).

Ok, I will fix.

> 
> > +	visconti_ulreg_writel(pcie, PCIE_UL_APP_LTSSM_ENABLE, PCIE_UL_REG_V_SII_GEN_CTRL_01);
> > +
> > +	ret = visconti_pcie_check_link_status(pcie);
> > +	if (ret < 0) {
> > +		dev_info(pci->dev, "Link failure\n");
> > +		return ret;
> > +	}
> > +
> > +	val = visconti_mpu_readl(pcie, PCIE_MPU_REG_MP_EN);
> > +	visconti_mpu_writel(pcie, val & ~MPU_MP_EN_DISABLE, PCIE_MPU_REG_MP_EN);
> > +
> > +	visconti_ulreg_writel(pcie, PCIE_UL_S_INT_EVENT_MASK1_ALL, PCIE_UL_REG_S_INT_EVENT_MASK1);
> > +
> > +	return 0;
> > +}
> > +
> > +static int visconti_pcie_host_init(struct pcie_port *pp)
> > +{
> > +	dw_pcie_setup_rc(pp);
> > +	return visconti_pcie_establish_link(pp);
> 
> This doesn't look like correct usage of the dwc infrastructure.  No
> other *_pcie_host_init() functions call dw_pcie_setup_rc().  It'd be
> nice if the dwc infrastructure had a little more of a user's guide.
> In the meantime, try to copy the structure and style of existing
> drivers.
> 

OK, I will check using dw_pcie_setup_rc().


> > +}
> > +
> > +static const struct dw_pcie_host_ops visconti_pcie_host_ops = {
> > +	.host_init = visconti_pcie_host_init,
> > +};
> > +
> > +static u64 visconti_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 pci_addr)
> > +{
> > +	return pci_addr - PCIE_BUS_OFFSET;
> > +}
> > +
> > +static const struct dw_pcie_ops dw_pcie_ops = {
> > +	.cpu_addr_fixup = visconti_pcie_cpu_addr_fixup,
> > +};
> > +
> > +static int visconti_get_resources(struct platform_device *pdev,
> > +				  struct visconti_pcie *pcie)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +
> > +	pcie->ulreg_base = devm_platform_ioremap_resource_byname(pdev, "ulreg");
> > +	if (IS_ERR(pcie->ulreg_base))
> > +		return PTR_ERR(pcie->ulreg_base);
> > +
> > +	pcie->smu_base = devm_platform_ioremap_resource_byname(pdev, "smu");
> > +	if (IS_ERR(pcie->smu_base))
> > +		return PTR_ERR(pcie->smu_base);
> > +
> > +	pcie->mpu_base = devm_platform_ioremap_resource_byname(pdev, "mpu");
> > +	if (IS_ERR(pcie->mpu_base))
> > +		return PTR_ERR(pcie->mpu_base);
> > +
> > +	pcie->refclk = devm_clk_get(dev, "pcie_refclk");
> > +	if (IS_ERR(pcie->refclk)) {
> > +		dev_err(dev, "Failed to get refclk clock: %ld\n", PTR_ERR(pcie->refclk));
> > +		return PTR_ERR(pcie->refclk);
> > +	}
> > +
> > +	pcie->sysclk = devm_clk_get(dev, "sysclk");
> > +	if (IS_ERR(pcie->sysclk)) {
> > +		dev_err(dev, "Failed to get sysclk clock: %ld\n", PTR_ERR(pcie->sysclk));
> > +		return PTR_ERR(pcie->sysclk);
> > +	}
> > +
> > +	pcie->auxclk = devm_clk_get(dev, "auxclk");
> > +	if (IS_ERR(pcie->auxclk)) {
> > +		dev_err(dev, "Failed to get auxclk clock: %ld\n", PTR_ERR(pcie->auxclk));
> > +		return PTR_ERR(pcie->auxclk);
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int visconti_device_turnon(struct visconti_pcie *pcie)
> 
> There are no other drivers with a *_turnon() function.  Can you copy
> a name used in other drivers for similar functionality?  Maybe this
> is similar to kirin_pcie_power_on(), meson_pcie_power_on(), etc?
> 

Yes, It provides the same functionality as kirin_pcie_power_on() and so
on. I will change the function name.

> > +{
> > +	int err;
> > +	u32 val;
> > +
> > +	visconti_smu_writel(pcie, PISMU_CKON_PCIE_AUX_CLK | PISMU_CKON_PCIE_MSTR_ACLK,
> > +			    PISMU_CKON_PCIE);
> > +	ndelay(250);
> > +
> > +	visconti_smu_writel(pcie, PISMU_RSOFF_PCIE_ULREG_RST_N, PISMU_RSOFF_PCIE);
> > +
> > +	visconti_ulreg_writel(pcie, PCIE_UL_REG_S_PCIE_MODE_RC, PCIE_UL_REG_S_PCIE_MODE);
> > +
> > +	val = PCIE_UL_IOM_PCIE_PERSTN_I_EN | PCIE_UL_DIRECT_PERSTN_EN | PCIE_UL_DIRECT_PERSTN;
> > +	visconti_ulreg_writel(pcie, val, PCIE_UL_REG_S_PERSTN_CTRL);
> > +	udelay(100);
> > +
> > +	val |= PCIE_UL_PERSTN_OUT;
> > +	visconti_ulreg_writel(pcie, val, PCIE_UL_REG_S_PERSTN_CTRL);
> > +	udelay(100);
> > +
> > +	visconti_smu_writel(pcie, PISMU_RSOFF_PCIE_PWR_UP_RST_N, PISMU_RSOFF_PCIE);
> > +
> > +	err = readl_relaxed_poll_timeout(pcie->ulreg_base + PCIE_UL_REG_S_PHY_INIT_03, val,
> > +				 (val & PCIE_UL_PHY0_SRAM_INIT_DONE), 100, 1000);
> > +	if (err)
> > +		return err;
> > +
> > +	visconti_ulreg_writel(pcie, PCIE_UL_PHY0_SRAM_EXT_LD_DONE, PCIE_UL_REG_S_PHY_INIT_02);
> > +
> > +	return readl_relaxed_poll_timeout(pcie->ulreg_base + PCIE_UL_REG_S_SIG_MON, val,
> > +				 (val & PCIE_UL_CORE_RST_N_MON), 100, 1000);
> > +}
> > +
> > +static int visconti_add_pcie_port(struct visconti_pcie *pcie, struct platform_device *pdev)
> > +{
> > +	struct dw_pcie *pci = &pcie->pci;
> > +	struct pcie_port *pp = &pci->pp;
> > +	struct device *dev = &pdev->dev;
> > +	int ret;
> > +
> > +	pp->irq = platform_get_irq_byname(pdev, "intr");
> > +	if (pp->irq < 0) {
> > +		dev_err(dev, "interrupt intr is missing");
> 
> Make your error messages consistently capitalized (or consistently not
> capitalized).

Sorry, I didn't understand this point correctly.
Does this mean capitalize the first letter of the message?

> 
> > +		return pp->irq;
> > +	}
> > +
> > +	pp->ops = &visconti_pcie_host_ops;
> > +
> > +	pci->link_gen = of_pci_get_max_link_speed(pdev->dev.of_node);
> > +	if (pci->link_gen < 0 || pci->link_gen > 3) {
> > +		pci->link_gen = 3;
> > +		dev_dbg(dev, "Applied default link speed\n");
> > +	}
> > +
> > +	dev_dbg(dev, "link speed Gen %d", pci->link_gen);
> > +
> > +	ret = visconti_device_turnon(pcie);
> > +	if (ret)
> > +		goto error;
> 
> There's no cleanup, so just "return ret;" here and omit the "error:"
> label.

Indeed. I will update this.

> 
> > +	ret = dw_pcie_host_init(pp);
> > +	if (ret)
> > +		dev_err(dev, "Failed to initialize host\n");
> > +
> > +error:
> > +	return ret;
> > +}
> > +
> > +static int visconti_pcie_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct visconti_pcie *pcie;
> > +	struct pcie_port *pp;
> > +	struct dw_pcie *pci;
> > +	int ret;
> > +
> > +	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
> > +	if (ret)
> > +		return ret;
> > +
> > +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> > +	if (!pcie)
> > +		return -ENOMEM;
> > +
> > +	pci = &pcie->pci;
> > +	pp = &pci->pp;
> > +	pp->num_vectors = MAX_MSI_IRQS;
> > +
> > +	pci->dev = dev;
> > +	pci->ops = &dw_pcie_ops;
> > +
> > +	ret = visconti_get_resources(pdev, pcie);
> > +	if (ret)
> > +		return ret;
> > +
> > +	platform_set_drvdata(pdev, pcie);
> > +
> > +	return visconti_add_pcie_port(pcie, pdev);
> > +}
> > +
> > +static const struct of_device_id visconti_pcie_match[] = {
> > +	{ .compatible = "toshiba,visconti-pcie" },
> > +	{},
> > +};
> > +
> > +static struct platform_driver visconti_pcie_driver = {
> > +	.probe = visconti_pcie_probe,
> > +	.driver = {
> > +		.name = "visconti-pcie",
> > +		.of_match_table = visconti_pcie_match,
> > +		.suppress_bind_attrs = true,
> > +	},
> > +};
> > +
> > +builtin_platform_driver(visconti_pcie_driver);
> > -- 
> > 2.30.0.rc2
> > 
> 

Best regards,
  Nobuhiro



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux