Re: [PATCH v5 16/16] of: Add plumbing for restricted DMA pool

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 22, 2021 at 4:17 PM Claire Chang <tientzu@xxxxxxxxxxxx> wrote:
>
> If a device is not behind an IOMMU, we look up the device node and set
> up the restricted DMA when the restricted-dma-pool is presented.
>
> Signed-off-by: Claire Chang <tientzu@xxxxxxxxxxxx>
> ---
>  drivers/of/address.c    | 25 +++++++++++++++++++++++++
>  drivers/of/device.c     |  3 +++
>  drivers/of/of_private.h |  5 +++++
>  3 files changed, 33 insertions(+)
>
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 54f221dde267..fff3adfe4986 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -8,6 +8,7 @@
>  #include <linux/logic_pio.h>
>  #include <linux/module.h>
>  #include <linux/of_address.h>
> +#include <linux/of_reserved_mem.h>
>  #include <linux/pci.h>
>  #include <linux/pci_regs.h>
>  #include <linux/sizes.h>
> @@ -1109,6 +1110,30 @@ bool of_dma_is_coherent(struct device_node *np)
>  }
>  EXPORT_SYMBOL_GPL(of_dma_is_coherent);
>
> +int of_dma_set_restricted_buffer(struct device *dev)
> +{
> +       struct device_node *node;
> +       int count, i;
> +
> +       if (!dev->of_node)
> +               return 0;
> +
> +       count = of_property_count_elems_of_size(dev->of_node, "memory-region",
> +                                               sizeof(phandle));
> +       for (i = 0; i < count; i++) {
> +               node = of_parse_phandle(dev->of_node, "memory-region", i);
> +               /* There might be multiple memory regions, but only one
> +                * restriced-dma-pool region is allowed.
> +                */
> +               if (of_device_is_compatible(node, "restricted-dma-pool") &&
> +                   of_device_is_available(node))
> +                       return of_reserved_mem_device_init_by_idx(
> +                               dev, dev->of_node, i);
> +       }
> +
> +       return 0;
> +}
> +
>  /**
>   * of_mmio_is_nonposted - Check if device uses non-posted MMIO
>   * @np:        device node
> diff --git a/drivers/of/device.c b/drivers/of/device.c
> index c5a9473a5fb1..d8d865223e51 100644
> --- a/drivers/of/device.c
> +++ b/drivers/of/device.c
> @@ -165,6 +165,9 @@ int of_dma_configure_id(struct device *dev, struct device_node *np,
>
>         arch_setup_dma_ops(dev, dma_start, size, iommu, coherent);
>
> +       if (!iommu)
> +               return of_dma_set_restricted_buffer(dev);
> +
>         return 0;
>  }
>  EXPORT_SYMBOL_GPL(of_dma_configure_id);
> diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h
> index d717efbd637d..e9237f5eff48 100644
> --- a/drivers/of/of_private.h
> +++ b/drivers/of/of_private.h
> @@ -163,12 +163,17 @@ struct bus_dma_region;
>  #if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_HAS_DMA)
>  int of_dma_get_range(struct device_node *np,
>                 const struct bus_dma_region **map);
> +int of_dma_set_restricted_buffer(struct device *dev);
>  #else
>  static inline int of_dma_get_range(struct device_node *np,
>                 const struct bus_dma_region **map)
>  {
>         return -ENODEV;
>  }
> +static inline int of_dma_get_restricted_buffer(struct device *dev)

This one should be of_dma_set_restricted_buffer. Sorry for the typo.

> +{
> +       return -ENODEV;
> +}
>  #endif
>
>  #endif /* _LINUX_OF_PRIVATE_H */
> --
> 2.31.1.368.gbe11c130af-goog
>



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux