This commit adds the Device Tree binding documentation that allows to describe the PCIe controller found in Toshiba Visconti SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx> --- .../bindings/pci/toshiba,visconti-pcie.yaml | 121 ++++++++++++++++++ 1 file changed, 121 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml new file mode 100644 index 000000000000..8ab60c235007 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba Visconti5 SoC PCIe Host Controller Device Tree Bindings + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx> + +description: |+ + Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: toshiba,visconti-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers. + - description: PCIe configuration space region. + - description: Visconti specific additional registers. + - description: Visconti specific SMU registers + - description: Visconti specific memory protection unit registers (MPU) + + reg-names: + items: + - const: dbi + - const: config + - const: ulreg + - const: smu + - const: mpu + + interrupts: + maxItems: 1 + + clocks: + items: + - description: PCIe reference clock + - description: PCIe system clock + - description: Auxiliary clock + + clock-names: + items: + - const: pcie_refclk + - const: sysclk + - const: auxclk + + num-lanes: + const: 2 + + num-viewport: + const: 8 + +required: + - reg + - reg-names + - interrupts + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + - ranges + - bus-range + - device_type + - num-lanes + - num-viewport + - clocks + - clock-names + - max-link-speed + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@28400000 { + compatible = "toshiba,visconti-pcie"; + reg = <0x0 0x28400000 0x0 0x00400000>, + <0x0 0x70000000 0x0 0x10000000>, + <0x0 0x28050000 0x0 0x00010000>, + <0x0 0x24200000 0x0 0x00002000>, + <0x0 0x24162000 0x0 0x00001000>; + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; + device_type = "pci"; + bus-range = <0x00 0xff>; + num-lanes = <2>; + num-viewport = <8>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>, + <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = + <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>; + clock-names = "pcie_refclk", "sysclk", "auxclk"; + max-link-speed = <2>; + + status = "disabled"; + }; + }; +... -- 2.30.0.rc2
