Re: [PATCH v3 1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 30, 2021 at 12:23:35PM -0400, Jim Quinlan wrote:
> On Tue, Mar 30, 2021 at 11:30 AM Mark Brown <broonie@xxxxxxxxxx> wrote:

> > For a soldered down part I'd expect we'd want both (if the host even
> > cares) - for anything except a supply that I/O or something else shared
> > is referenced off there's no great reason why it has to be physically
> > the same supply going to every device on the bus so each device should
> > be able to specify separately.

> Our developer and reference boards frequently have Mini and half-mini
> PCIe sockets (a few exceptions), whereas production boards are mostly
> soldered down.

On reflection I think the above probably also applies to sockets - you'd
just have to have a socket visible in the DT.

> If I resubmit this pullreq  so that it  looks for "vpcie12v-supply"
> and "vpcie3v3-supply" in the host node, will that be acceptable for
> both of you?

I think you will need both (assuming the controller actually physically
gets the supplies) - like I say the sockets/devices may not all share
the same 12V and 3.3V rails.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux